Internal Tube Cutter Dealers

This internal tube cutter can be operated with Electric or Pneumatic drill machine. This tool is easy to operate. Insert the tool in the tube which is to be cut. Adjust the thrust collar as per the cutting length required then gradually press the Electric or Pneumatic drive which is attached to the tool. The cutting bit cuts the tube within few seconds.

Cuts tube in one turn with less efforts so cutting time is saved.   Features of One Revolution Internal Tube Cutter - OTC Series POWERMASTER “One Revolution” Internal Tube Cutter pierces and cuts off non-ferrous and thin walled ferrous tubes in one revolution. This “One Revolution” Internal Tube Cutter is designed for hand operation using a ratchet handle. The Cutter Tool Bit operates on an eccentric principle. The Tube Cutter is entered in the tube with the Tool Bit in closed position , ratchet is applied and turned in clockwise direction. The Tool Bit contacts the tube during the One Revolution and pierces the tube wall and as turning is continued the Tool Bit shears through the tube along its circumference. This Cutter is fitted with an adjustable collar enabling it to reach into tubes at various distances and they are available in optional increments of 2”(50.8mm). Standard adjustable reach is 6”(152.4mm). ”A” reach = 8”(203.2). “B” reach = 10”(254.0mm). “C” reach = 12”(304.8mm) etc. All Cutters are available for MM tube sizes also.

This is the ideal tube cutter when it comes to cutting thick walled boiler tube. The cutter slices through thick carbon steel with ease in the removal of tubes when retubing.   Features of the PR-68 Series Internal Tube Cutter: PR-68 tube cutters are ideal for tube cutting thick walled boiler tube of 2” O.D. and higher. The Internal Tube Cutters PR-68 is driven via the square in a clockwise direction using either an electric, pneumatic or hydraulic driving machine. PR-68 type tube cutters are available in standard reach of 4” (101.6mm). Additional reaches in increments of 4” up to 16” (406.4mm) are available as well.   Sizes Available: 1/2" O.D. to 4 1/2" O.D.   Models Available: 0680951 to 0689301

Leveraging on our enriched industry experience, we are engaged in manufacturing and exporting a huge gamut of Push Type Internal Tube Cutter. This superior grade Internal Tube Cutter Push type is manufactured in our latest manufacturing unit by using the finest quality raw materials. We take into account the international quality standards set by the industry and offer suitable range of Internal Tube Cutter Push type. Features : Range: 5/8” to 1.1/8” tube OD Designed for the use in maintenance of heat exchangers / condensers. To be use with portable electric or pneumatic drive. Allows cutting 3-4 mm thick tubes. Allows cutting 3-4 mm thick tubes. Use to cut ferrous and non ferrous tube. Standard adjustable reach up to 4” available.

The most versatile cutter. The cutter blade depth can be adjusted. Available for 5/8” to 1” O.D. Tubes.

Internal Tube Cutter, Tube Expander, Manual Tube Puller, Tube Removal Tool

Internal Tube Cutter, Grooving Tools, Tube Cleaners, Tube End Face