Magnetic Sensor Dealers

We have developed state-of-the-art storage facility wherein we keep a large stock. It also prevents our offerings from air, duct, sunlight and other damaging factors. The range we offer to the customers are stringently packed and delivered as per the customers' requirement and convenience. Corrosion, Stain, Sulphationand Ionisation Resistant. Details : Electrically IsolatedSensor. Can work with JalmitraMini, Nano & Jumbo. Works with all liquids.

Apply to switchboard, duplicator, washing machine, refrigerator, camera, electronic scale, juice level gauge, gas meter and water meter, etc. Specifications: With fixed bolt hole for easy installation Working distance: 1.5 CM Operating voltage: 3.3 V-5 V Output Type: Digital switching output (0 and 1)

Float Sensor is an electrical ONOFF Switch, which operates automatically when liquid level goes up or down with respect to specified level. The Signal thus available from the Float Sensor can be utilized for control of a Motor Pump or an allied electrical element like Solenoid, Lamps, and Relays etc. Float Sensors contain hermetical sealed Reed Switch in the stem and a permanent Magnet in the Float. As the Float rises or falls with the level of liquid the Reed Switch is activated by Magnet in the Float. Hamilton Float Sensors are available in wide range according to operation material mounting methods to suit variety of individual application. These Float sensors are rugged, accurate and reliable in operation.

Offered by us in a gamut of different models, our Generator Magnetic Pickup RPM Sensor stands tall in the market. Robust construction, long service life and reasonable prices are the specialties of our Generator Magnetic Pickup RPM Sensors. Stop fretting about the prices with us as we offer the sensors at rock bottom prices. We are a top-notch Manufacturer and Supplier of Generator Magnetic Pickup RPM Sensor in the country.

Hall Effect Sensor AH34 is a low noise linear analog output sensor device which opens wide scope of measurements related to displacement, angular position and current ratings. These sensors shows ratio metric property as the output voltage of the sensor is proportional to the applied magnetic field. The AH34 hall sensor is packaged in 3 pin ultra mini SIP, which confers to the industrial requirement for small size, high accuracy and extensive work capacity avoiding any type of mechanical stress. Each sensor has inbuilt BiCMOS monolithic circuit with temperature compensating circuitry and an amplifier for processing low signal and high gain. The device can withstand extreme environment conditions with temperature ranging from -40oC to 150oC. The device is lead (Pb) free and best suited in application of automotive and industrial applications. Package 3 pin-SIP Output Source Current 2 mA Output Sink Current 10 mA Supply Voltage 4.5 to 5.5 volt Supply Current 9 mA (max) Operating Ambient Temperature Range -40o C to +150o C Sensitivity 2.5000 mV/G to 5.000 mV/G (Typ.) Application ·         Automotive,   ·         Current measurement   ·         Angular positions   ·         RPM measurements.

HL5500PC is a turnkey, high performance hall effect system for the measurement of resistivity, carrier concentration, and mobility in semiconductors. Modular in concept, allowing easy upgrade paths, the system is suitable for a wide variety of materials, including silicon and compound semiconductors. HL5500PC has both low and high resistivity measurement capabilities, with optional cryostats extending thetemperature range from 77K to 550K. With an intuitive Microsoft Windows user interface, no programming experience is required to set up or use the HL5500PC.

Manufactured in confirmation to the established industrial standards of excellence, these AC and DC Magnetic Sensors are known for delivering the best performance. We are among the reputed sources for procuring these AC and DC Magnetic Sensors. Also, these AC and DC Magnetic Sensors can be purchased from us at reasonable rates. Highlights Easy to operateEasy to installLong-lifeSmooth performance

Magnetic field sensors are used in particular for contactless detection of the piston position in pneumatic cylinders. Using a patented operating principle, our magnetic field sensors detect permanent magnets of different strength attached to the piston in all common cylinders error-free. The sensors operate wear-free, are short-circuit proof, rugged and IP67 rated. We also offer solutions for use in welding or hazardous areas as well as for analog queries.

Magnetic proximity sensors with maximum operating distances and a minimal design SICK offers a comprehensive range of magnetic proximity sensors in cylindrical (MM) and rectangular (MQ) designs. The sensors are available with large operating distances and the advanced series offers an extended operating distance, with entirely new application options opened up due to the smaller magnets. The NAMUR version of the MM sensors completes this comprehensive series. MQ sensors offer all the advantages of a magnetic proximity sensor in a compact plastic housing. Magnetic proximity sensors are specially designed for harsh environments, being resistant to   Product Family: In this type of sensors several types are available like MM series, MM Namur series, MQ series etc.   Housing type: Rectangular and Cylindrical types are available.   Thread size: M8 1, M12 1 &M18 1sizes are available.   Sensing Range: 0mm to 120mm sensing range is available.   Electrical Wiring: Dc& Namur both wires are available.   Output type: PNP and NPN, Namur all output types are available.   Output Function: NC, NO are available. Other output types are available on optional basis.   Connection type: Prewired / Cable type, with connector, Pigtail types are available.   Housing Material: Plastic, Metal, Stainless steel& other types are available.   Special Features: Advance sensing range and Short version.   Protection Class: Protection class can be up to IP69K. Magnetic Cylindrical sensors can be fitted on any kind of cylinders/any make.