Magnetic Sensor Dealers

Main features - Wide range of housing shapes and materials - Hall effect sensors - To be used in several application and suitable for a lot of different fixing systems. - Atex sensors for use in explosive environments Applications Carlo Gavazzi offers a comprehensive range of Magnetic Sensors to be used in proximity of detection applications. They are employed in conjunction with an external magnet: when the sensor approaches the magnet, the output from the sensor will change state. Typically these sensors will have a longer sensing distance than typical proximity sensors. Moreover, the output will be a mechanical contact. There is a wide variety of styles available including rectangular, cylindrical, and slotted ones. In addition, special coded magnets and sensors are available for use in safety applications. Magnetic sensors are frequently used on elevators and lifts, gate control, level detection, and access control.

Magnetic Sensors:- Magnetic proximity sensors are characterized by the possibility of large switching distances, available from sensors with small dimensions. They detect magnetic objects (usually permanent magnets), which are used to trigger the switching process. As the magnetic fields are able to pass through many non-magnetic materials, the switching process can also be triggered without the need for direct exposure to the target object. By using magnetic conductors (e.g., iron), the magnetic field can be transmitted over greater distances so that, for example, the signal can be carried away from high temperature areas.

It consists of transmitter and magnetic part, it is used to detect door, window, or drawer when it is opened or removed. 12Volt battery included for 3months, it can be fixed by adhesive or screws.

The Magnetic Loom Sensor is an highly sophisticated and reliable device to sense the weft breakage, empty bobbin, and uneven weft tension in Circular Loom. The sensor is heavy-duty type and suits for environmental conditions of Plastic Woven sacks Industry. The sensor works on the principle of magnetism, there by eliminating the problems like dust, ambient light, reflection of fabric which are prominent in light based sensors. The sensor is totally sealed and hence, virtually no maintenance is required in day-to day operations. The design of sensor is such that, installation is very simple and requires fitting of boom reflector assemblies (with magnets fitted in place of diamond) on boom pipe, mounting of sensor on the loom and fitting of relay card in panel. The magnets are arranged in such a way that North and South poles of the magnets comes under sensor alternately avoiding magnetization of sensor. The 3-core wire from sensor connects to relay PCB. When shuttle bobbin runs out of the tape or if the shuttle tape breaks, then magnet rotates and comes under magnetic sensor, this magnetic field is sensed by sensor, and relay is energized. The contact of the relay stops the loom and cramming is started. The sensor can be used on other types of loom also with modification in Magnet Holder. We have already developed the magnet holder for different make of loom. We can also design the magnet holder assembly for any other type of Loom. The Advantages of Sensors The shuttle bobbin can be completely utilized hence it is not necessary to put it on creel stand for further use. As smaller bobbins removed from shuttle are not loaded on creel, the creel stand can be loaded with large size bobbin and frequent stoppage to change creel bobbin is avoided. One operator can handle multiple loom as he does not have to monitor the shuttle bobbin constantly. The wastage due to tape breakage in shuttle bobbin is totally avoided, as loom stops (with cramming if enabled), immediately if tape breaks. As the Sensor is based on magnetic principle, the effect of dust and calcium carbonate is nil. The Sensor does not requires any maintenance. The efficiency of loom increases and quality of fabric is also improved as loom stops even if the shuttle tape is slightly loose. The pay back of the system is fast due to more production, improved quality, less down time of the loom and reduced wastage.

HL5500PC is a turnkey, high performance hall effect system for the measurement of resistivity, carrier concentration, and mobility in semiconductors. Modular in concept, allowing easy upgrade paths, the system is suitable for a wide variety of materials, including silicon and compound semiconductors. HL5500PC has both low and high resistivity measurement capabilities, with optional cryostats extending thetemperature range from 77K to 550K. With an intuitive Microsoft Windows user interface, no programming experience is required to set up or use the HL5500PC.

The omnipolar detection Hall IC is incorporating a polarity determination circuit that enables separate operation (output) of both the South and North poles.