PIR Motion Detector Dealers

Compact and complete, easy to use Pyroelectric Infrared (PIR) Sensor Module for human body detection. Incorporating a Fresnel lens and motion detection circuit, suitable for a wide range of supply voltages and with low current drain. High sensitivity and low noise. Output is a standard TTL active low output signal indicated by on board LED. The PIR (Passive Infra-Red) Sensor is a pyroelectric device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single IO pin. Module provides an optimised circuit that will detect motion up to 6 metres away and can be used in burglar alarms and access control systems. The PIR sensor and Fresnel lens are fitted onto the the PCB. This enables the board to be mounted inside a case with the detecting lens protruding outwards, whilst still allowing easy access to the controls inside the case.

Sensinova Is Most Excellent Company For Manufacturing Of PIR Sensor. It Is Producing Best Quality Products For Customers. Currently Sensinova Is A Good Supplier In India For Sensor Products.PIR Motion Sensor Product Description: Sensinova Is Most Excellent Company For Manufacturing Of PIR Sensor. It Is Producing Best Quality Products For Customers. Currently Sensinova Is A Good Supplier In India For Sensor Products. What is (full form of) PIR sensor? PIR Sensor Full Form Is Passive Infrared Sensor. It Is An Electronic Appliance Measures Infrared Radiation From Objects In Generated Field By PIR Detector. Sometimes It Called PID – Passive Infrared Detector. How PIR sensor works? It Detects Changes In Amount Of IR Radiation, Which Is Depends Upon The Outside Characteristics And Temperature Of The Objects In Front Of Detector. It Means If Human Or Animal Will Come In Range Of Detector It Will Detect Movement Because Live Body Eliminates Warm Energy In Form Of IR Radiation. So It Will Give You Signal By Light Or Alarm When Any Live Object In Front Of PIR.

Motion Sensor for Factory Warehouse and Godown. IS 345 Mx Highbay [High ceiling mount PIR motion sensor] Type : - 180° PIR Motion Sensor Ceiling Mounting Height : - 12 meters Application : - Factory Warehouse and Godown Technology : - Ceiling mount Passive Infrared PIR motion sensor Reach : - 30 meters x 4 meters Time Setting : - 5 Sec - 15 Minutes Lux setting facility : - 2-2000 Lux Load switching : - 1000 W uncorrected inductive loads like fluorescent lamps/tubes with electronic ballasts - 230V AC 50 Hz. http://www.occupancysensor-motionsensorlights.com/warehouse.php

We offer pir motion detector. A pir-based motion detector is used to sense movement of people, animals, or other objects. They are commonly used in burglar alarms and automatically-activated lighting systems. They are commonly called simply "pir", or sometimes "pid", for "passive infrared detector". This wall mountpir sensor works on the principle of passive infrared detection from the infrared heat emitted by human beings. The fresnel lens of this light control motion sensor has an angle of aperture of 180'360' as it is wall mounted and therefore can only detect human motion in front of the lens and not behind it. The detection lens of the light control motion sensor is mounted on a pivot for adjusting the tilt angle to suit the application area applications: main entrance toilet pantry stairways lifts lobby covered parking area lockers room trial rooms office atm malls and many more!!! specifications: detection range 360°180° power source 220-240vac power frequency 5060hz rated load max.1200w (220-240vac) detection distance max.6m(24℃) time delay 10sec± 3sec to 7min±2min(adjustable) installation height 2.2m - 4m protection class ip 44

We are offering a wide range of Pir Motion Detector. Specification : voltage – 5v-20v power consumption : 65ma ttl output : 3.3v delay time : adjustable (0.2->5min) lock time: 0.2 sec trigger methods : l-disable repeat trigger, h enable repeat trigger sensing range : less than 120 degree within 7 meter temperature – 15~+70 dimension : 32*24mm, distance between screw 28mm, m2 lens dimension in diameter : 23mm application : automatically sensing light for floor, bathroom, basement, porch, warehouse, garage etc, ventilator, alarm etc.

We offer best quality PIR motion sensors and lights online in India at the lowest prices for indooroutdoor use. We provide PIR Motion Detection Sensors, Energy Saving Sensors, Passive Infrared Sensors, Outdoor PIR Sensors, PIR Sensor with Ceiling Lamp, Occupancy Sensors, Magic Light Sensors, Security Light Sensors, Halogen Light Sensors, PIR Motion Sensor Light Switch, Automatic Led Lights, Movement Sensors, Magic Power Saver Lights, CeilingWall Mount PIR Sensors, PIR Motion Sensor Led Floodlight, Ultrasonic PIR Motion Sensors, Presence Detectors and Car Parking Lot Lights. We sell quality products that are cost effective (not cheap), but with warranty!

This product is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and SMT; It gathers automatic, convenient, safe, energy-saving, practical functions; It has wide detection range made up of up and down, left and right service field; It utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install and its usage is wide; It has the function of power indication and detection indication.

5 in 1 Stagnant Occupant Sensor, Bus Enabled, Energy Pilot, with Ultrasonic Cali ratable Distance sensor for occupancy, LUX, PIR, Security, and Energy Saving Distributed intelligence, for both automation and security use, (PIR Detection Angle = 110 Degrees, PIR Adjustable detection. Range 10 Meters diameter), (Ultrasonic Distance Adjustable 1-4 meters)

Product ID: 1136 The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. It is often referred to used "PIR", "Pyroelectric", "Passive Infrared" and "IR Motion" sensor. Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc 100% Brand New and High Quality Infrared Sensor with Control Circuit Board The Sensitivity and Holding Time Can be adjusted. Working Voltage Range: DC 4.5V- 20V Current Drain: