Pneumatic Filter Dealers

Vacuum filter body is placed at elevated height on clean fluid tank. Sealed cavity under filter paper is extended till low fluid level in the tank. A blower evacuates this cavity continuously. A conveyer belt in the vacuum filter supports filter paper. A transfer pump lets dirty fluid above the filter paper. Vacuum under the filter paper sucks the fluid through, letting the dirt remain on top. Dirt layer formed on the filter paper facilitates finer filtration. After the filter paper is choked, level rise above it is sensed by a float switch, starting conveyer drive. Applications : Suitable for fine filtration of coolants used in rolling & wire drawing. Features: • Fine filtration is achieved using lesser filter paper. This gives better quality at lesser operational cost. • Totally automatic operation.

SOLENOID VALVES. ROTOR COUPLING  ACTUATOR VALVES  MECHANICAL VALVES PNEUMATICS VIBRATORS HYDRAULIC SHOCKERS. FINE FILTERS. FILTER REGULATOR AND LUBRICATOR MANIFOLD FOR VALVES SPARES  PNEUMATICS CYLINDER CYLINDER ACCESSORIES  PNEUMATICS COUPLING HYDRAULIC BALL VALVES S.S BALL VALVES. BRASS BALL VALVES BALANECR & HOSE REEL PNEUMATIC FITTING PTFE TAPE & PRESSURE GAUGE  PNEUMATIC SILENCERS COOLANT PIPE & PRESSURE SWITCH  AIR GUN AND SPRAY GUN PU TUBE RECOILED HOSE & CORD  PNEUMATICS TOOL  SANDING PADS  PNEUMATICS TOOL NAILERS 

We offer Pneumatic Filter. Applications: Recommended for increasing in life of Air Operated Equipment. Principle of working: Eliminates moisture, oil emulsions, condensed liquids and harmful foreign matter, thus maintaining a high level of purity. Features: • Pressure die cast aluminum alloy body • Centrifugal airflow separates moisture and oil emulsions. • Increased area of filter element traps solids • Increased quiet zone collects more liquid • Easy to dismantle. Specifications : 14’,38’,12’,&34’ Pipe sizes. BSP,BSPTr and NPT pipe thread standards as per IS -554 of 1964 • Low pressure Drop:2 ½ to 3% at maximum flow. • Polycarbonate bowl –Maximum air pressure: 14 kgcm2 at 1200F. Metal bowl 28kgcm2 at 1750F.

We are offering pneumatic filter. We are trader, exporter and supplier of accessories series c, mc, m and n. Available in - semi-automatic - manual drain; automatic drain depressurisation drain; depressurisation drain, protected port 1/8 (without drain). For more details.

Bag Filters used in Pneumatic Conveying Systems as the final element to prevent any dust carry-over to the environment. The bag cleaning is done by an electronically controlled valve with timer. Bag filter are floor mounted with a suitable integral collection hopper and a discharge valve. Bag filters are available in different sizes and material of construction depending on applications. Scorpio can manufacture top loading, bottom loading and side loading of the filter elements to suit critical site requirements. The dust particles down to 0.3 micron can be filtered by a special filter element. Cloth area: customised. MOC: MS construction / SS304 contact parts Paint: Synthetic enamel paint - 100 DFT. ( Optional: Epoxy paint) Control Voltage: 24V DC / 110V AC / 220V AC "Filter Bags: Polyester needle felt. ( Various filter membrane available for specific application)" Filter Cleaning: Sequential reverse pulse jet cleaning mechanism Bag removal: From top or side. Dust Handled: From fine dust of 0.3 micron onwards. Dust collector outlet dust Emission level - 10 to 15ppm. Collection Hopper: Included Outlet Valve: Optional Hopper Discharge Aids: Optional

We are offering pneumatic air filter standard series | service : air water sizes: 6 mm to 50 mm (g 14" to g2") flow: up to 500 scfm @ 7 kg cm2g filters for heavy duty application with minimum pressure drop two stage air cleaning action cyclonic separation depth style filter element.

A pneumatic filter is a device which removes contaminants from a compressed air stream. This can be done using a number of different techniques, from using a "media" type that traps particulates, but allows air to pass through to a venturi, to a membrane that only allows air to pass through.

Our organization provides a wide range of bag filter, which is air pollution control equipment that meets the requirements of numerous industries. These are designed around the nature of dust. use of engineered fabric filter tubes, envelopes or cartridges in the dust capturing, separation or filtering process. Our range is available in various sizes to suit an available location or process.

Applications:- Paint, Varnish, Resins, Printing Inks, Adhesives and all viscous liquids Vegetable oil refineries for filtration of crude oil Filtration of used cooking oils (Fast Food Joints, Hotels) Polymer Filtration Lubricating Oils Coolant filtration Pharmaceutical Starch Plants Surface treatment chemicals Ethanol plants, bio-diesel

Filter regulator: filter and regulator in one unit Standard regulator with different pressure regulation ranges On-off valve for switching on and for exhausting, soft-start valve for gradual pressure build-up

Applications Paint, Varnish, Resins, Printing Inks, Adhesives and all viscous liquids Vegetable oil refineries for filtration of crude oil Filtration of used cooking oils (Fast Food Joints, Hotels) Polymer Filtration Lubricating Oils/Coolant filtration Pharmaceutical Starch Plants Surface treatment chemicals Ethanol plants, bio-diesel   Models SFC-400 - Capacity upto - 7 M3/Hr SFC-800 - Capacity upto - 14 M3/Hr SFC-1600 - Capacity upto - 25 M3/Hr   Advantages of Self Cleaning Filters Auto-clean online operation & purging time adjustable Highest flow rates with compact design No labour involved No replacement of filter media Very low pressure drop as filter media is always clean No loss of expensive product caused by frequent changing of bags/media When installed before solid bowl centrifuges gives celan oil to centrifuges and hence down time is reduced hence more production

Pneumatic Filters, Pneumatic Couplers, Pneumatic Coupling

Pneumatics Air Filter, Thrust Ball Bearing, Deep Groove Ball Bearin

Pneumatic Filter, Bag Filters, Filter Fabric, Paint Filte