Polyethylene Pipe Dealers

We offer a wide range of grades for diverse applications across sectors such as packaging, agriculture, automotive, housing, healthcare, water and gas transportation, and consumer durables. Products are also exported to more than 60 countries. Driving our growth is the Polymer Research and Technology Centre (PRTC), which addresses the diverse needs of our customers and facilitates value-added performance.

Range:Upto 2000mm (88") Pressure Rating 2.5 to 25 kgf/cm2, Also available with tracer for easy detection.Standards:Is 4984, ISO 4427, DIN 8074/75, IS 14151Applications:• Sewerage• Drainage• Effuuent Conveyance & Disposal• Waste Disposal pipe• Relining Of Exiting Sewerage Lines• Slip Lining• Marine & Submarine Lines• Aquaculture• Salt pan Industries• Chemical Conveyance• Ash Slurry Convying• Pipes For HDD – Horizontal Directional DrillingGrades:• PE-63 • PE-80 •PE-100 (Black Color)• PP-H100 • PP-B80 • PP-R80

Jain Co-Extrusion process was developed in-house by JAINS in their R&D facility during 1993. Jain HDPE Ducts (permanently lubricated) is the result of innovative development in co-extrusion by JAINS. It is the versatile and unique solution for High Speed Air Blowing of Optical Fibre Cable. Jain Cable Ducts are manufactured with state-of-the-art machinery using latest processing technology and fulfill the performance requirement of National and International specifications. Approved by BSNL under TEC specification G/CDS-08/02 November 2004. Approved vendor and supplier to PGCIL, IOCL, GSPL, BSNL, MTNL Tata Tele, Hutch in India and also many customers in other countries as well. Can specially deliver tailor-made as per specifications to suit customers requirement. Supplied in coils of various lengths upto to 110 mm. Supplied with pre-inserted PP rope on request. JAIN SILICOAT® PE DUCT Jain Silicoat® PE Duct is extruded from selected high quality virgin HDPE material and co-extruded with special lubricant that is distributed uniformly along the entire inner surface of the duct providing a low friction smooth surface for easy cable drawing or blowing. The outer HDPE shell makes the pipe more tough and durable and enables the duct to withstand the pressure during HSAB of cable as well as retains the roundness under soil pressure and traffic load. Jain Silicoat® PE Ducts conform to BSNL specification & has type approval certificate. JAIN SELF LUBRICATED PE DUCT Jains now manufacture Jain SLB PE Duct which is the latest innovation from their R&D. JAIN SLB PE ducts are manufactured with high performing virgin HDPE material with the inner surface of the duct self lubricated by homogenous construction to give a smooth finish and low co-efficient of friction. Jain SLB PE Ducts have the same constructional stability and strength as that of Jain Silicoat® PE Duct and can withstand the pressure during HSAB as well as traffic load. JAIN SLB PE ducts conform to BSNL Specification and has Type Approval Certificate.

We are offering hdpe pipes - high density polyethylene pipes. rex hdpe pipes are manufactured from high density polyethene grade material pe-63, pe-80, pe-100 a most versatile material suitable for pipes. Hdpe pipes are of low costs and high performance. The pipes are better substitute for costly metallic and non metallic pipes like di, ci, ms, gi, ac. Hdpe pipes are generally made black in colour by addtion of carbon black to protect from ageing & degradation due to ultraviolet sunrays. pipes are manufactured in sizes from 20mm to 315mm outside diameter in all classes/ pressure ratings as per is:4984:1995 & is:14151:1994 duly isi marked. The pipes are available in coil form or straight lengths depending on sizes and customer requirements. advantages of rex hdpe pipes light weight flexibility toughness chemically inert resistance to abrasion smooth surface environmental stress crack resistance corrosion resistance frost & rodent resistance hygenic safety easy & quick installation low thermal conductivity applications of rex hdpe pipes potable water supply irrigation/agriculture gas transmission industrial effluents telephone cable duction sewerage & drainage sprinkler system slurry transportation chemical industries tubewells

Clients can approach us for placing orders, timely deliveries of the same are guaranteed with us. We have massive warehouse with Individual stock keeping units (SKUs). We are capable of sorting the products in an efficient way and can easily entertain bulk requirements of the customers.   Size : 1/2" 3/4" 1"

Manufactured by TPL Plastech an ISO 9001 company, at its state of the art manufacturing unit are made of virgin material and available in material grades PE-63, PE-80 and PE-100 in range of 20mmOD to 280mm OD. in pressure range PN 2.5 to PN 16.   TPL plastech PE Pipes are capable of handling semi-solid & gaseous effluents and has unmatched resistance to corrosive chemicals. They are lighter, easy to handle & install compared to heavier metallic or concrete pipes. TPL plastech PE Pipes are 100% leak proof therefore they are preferred over Galvanized, Ductile iron, Cement for applications such as portable water services or distribution lines, sewerage & drainage, cable ducting, natural gas distribution, irrigation, waste disposal, industrial application & offshore pipeline installation. TPL Plastech PE Pipes are made with quality assurance system and strict adherence to IS: 4984, IS: 14333, IS: 14151, ISO: 4427, DIN 8074 design and testing code to match the quality of our products and services.

A proprietary pipe protection structure and internal cushioning material help to prevent excessive deformation or damage to pipes in the event of localized twisting caused by ground movement, such as during an earthquake. Fully integrated quake-resistant piping networks can be constructed, extending from buried sections into buildings using polyethylene pipes

RAKSHA HDPE Pipes is a quality product. Low resistance to corrosion, non-toxic and inert to chemicals, low thermal conductivity and high electric resistance. These pipes are manufactured as per BIS specifications IS 4984-1995, IS 14151 & ISO 4427 in raw material grades PE-63 and PE-80 for various applications, like water supply, irrigation, tube wells submersible pumps, sewerage disposal and effluent treatment plants etc."

Polyethylene is a thermoplastic polymer consisting of long chains produced by combining the ingredient monomer ethylene. The ethylene actually converts to ethane as it takes its place in a polymer and straight sections of the polymer are the same structure as the simple chain hydrocarbons, e.g., propane, decane and other straight single-bonded carbon chains. As with any polymer, the structure of the resulting substance defies molecular description due to cross branching of the chains. HDPE (High Density polyethylene) is defined by a density of greater or equal to 0.941 g/cm3. HDPE has a low degree of branching and stronger intermolecular forces and tensile strength.       

We are engaged in offering Polyethylene Pipes, which are appreciated for their unmatched strength. These Polyethylene Pipes find their applications in Irrigation and Agricultural industries. The Polyethylene Pipes, we make available are preferred in comparison to other alternatives available due to their excellent abrasion resistance. Moreover, these Polyethylene Pipes can be availed at the market leading prices from us. Why Polyethylene Pipes? Lower Life Cycle costs Life Span of 50 – 100 Years Resistance to corrosion and abrasion 'C ' value over 150 throughout service life Excellent water hammer characteristics Reduced surge pressure by 50-80 % Leak free joints and lower instance of repair Resistance to incrustation & Scale formation Lower Pumping cost Lower Installation Costs Light weight – easy to handle & Transport No Heavy equipment for installation Longer delivery lengths – less fittings Flexibility – installation over bend with no additional joints

Pipes made from Polyethylene (PE) is a cost effective answer for a number of piping problems in Metropolitan, Municipal, Industrial, Underwater, Mining, Landfill Gas extraction, Cable duct and agricultural applications. It has been tested and proven effective for underground, above ground, surface, under water as well as floating pipe applications. Polyethylene pipes both High Density (HDPE) and Medium Density (MDPE) can carry potable water, wastewater, slurries, chemicals, hazardous wastes, cables and compressed gases as well as oils. Polyethylene pipes have a long and successful service experience to the gas oil, mining and water utility industries. PE pipes have the lowest repair frequency per Kilometer of pipe per year compared with all other pipe materials used for urban water and gas distribution. Jain PE pipes are strong, extremely tough and long lasting. Jain PE pipes will meet all your requirements of long service, trouble-free installation, flexibility, resistance to corrosion and chemicals.

The products are strictly packed and dispatched safely to the clients stated address and that too in the committed time span. We make sure the ranges of product we offer purchasers with are as per global quality management standards.

Polyethylene pipes, High Density Polyethylene is a thermoplastic Polyolefin material generated from the polymerization of ethylene. It is manufactured in petrochemical plants with petroleum as the raw material. Depending of the polymerization process, different types of polyethylene materials are obtained. HDPE, with a density of 0.94 ̴ 0.96 gcm³ is manufactured at low pressure. Several modified copolymers have been developed in recent years. A recently developed grade, often termed as PE 100 with a density of 0.95 ̴ 0.965 gcm³, has significantly higher strength properties than normal HDPE. It is especially designed for the production of larger diameter & thick walled pipe, but can be processed for the whole range of diameters. It also shows excellent resistance to rapid crack propagation and slow crack growth.

Prakash Agro Plast is recognized as one of the chief Manufacturers of PE Perforated Pipes among the rest in the market. The PE Perforated Pipes supplied by us are made from high grade Polyethylene. With diverse application in different industries, these PE Perforated Pipes are highly demanded by the clients. Attributes : Crack resistantSmooth inner surfaceBetter flow capacityHighly durable Applications : Telecom ductsSand coatingCable ductingWire ducting

Our polythene composite pipes are of the best quality and can be availed through us only. Our polythene composite pipes are also highly famous and are highly demanded by all. We process our plastic composite pipes under strict quality conditions so that there is no compromise in the quality. We also supply our pipes at quite reasonable prices for everyone to avail them easily. Our pipes can also be availed in a timely manner without any delays. We are also a leading polythene pipes manufacturer in India.

the medium density poly ethylene pipes or mdpe pipes are a reliable and preferred source for the natural gas distribution and transportation. The company is counted amidst the chief mdpe pipes manufacturers and suppliers in india. Mdpe pipe distributes the natural gas at 4 bar pressure, owing its outstanding operation and technical advantages. details medium density poly ethylene (mdpe) pe-80 and pe 100confirm to iso 4427, bs 7281, din 8074/75, and bis standard is: 14885sizes : ranging from 20mm to 315 mm (outer diameter) in all pressure ratings identified as yellow for gasorange for petrolblue for water known for leakage free jointslow installation costflexible for easy handlinglight weight as compared to metal pipesfusion joints for high integrity and reliabilitycorrosion resistant, tough and highly reliable in aggressive soilsexcellent resistance to crack subsidence, traffic vibrations, point leading and marshy ground