Protective Coatings Dealers

Based in Andhra Pradesh, we are offering excellent quality Protective Coatings. We have on board a team of professionals, who have years of experience in this domain. The surface of the structure will be protected by applying suitable paintings/sand blasting and painting depending upon the material composition of the structure. Our Protective Coatings protect the surface from extreme weather conditions. Our experts choose the paints/ protective coatings depending upon the location of the structure. E.g. we use  epoxy based protective coatings in coastal areas.

Protective coatings offered by us are based on polyurethanes (2K & 1K) and plays a significant role in fighting against corrosion and erosion. These are widely used in used in fertilizer units, chemical processing industries, shipping industries and marine environments. Apart from this, these also offer protection to the substrate by insulating them from moisture and oxygen. Our range is appreciated in the global market as it also offers resistance to different chemicals ranging from acids to alkalies.

Synthetic resin-based stone chip protection of vehicle underbody and lower body. The coating can be primed or overpainted in any color within 30-40 minuted after drying. The coating ha high durability and excellent resistance to abrasive wear. it also ha sound deadening and vibration absorbing properties.

Cable fire suppression coatings fire suppression coating especially designed for protecting electric power cables, communication cables, junction boxes - against ignition, propagation of fire, smoke emission. High solids intumescent firestop coating with ultra high density, heat insulation. Expands upto 65 times when exposed to heatfire.

Rain protective acrylic coating building protects us from nature forces like rain, heat, cold, wind etc., the concrete structures on its own is porous and hence not watertight. The unprotected structures suffer from water induced damage including deterioration and corrosion caused by chlorination, oxidation and sulphation. They reduce alkalinity in concrete and turns acidic. The result, reinforcement bar catch rust and eventually expands, to drastically hamper load bearing capacity of the building structures. The continuous presence of water leads to constant dampness & humidity and promotes the growth of molds and fungus on walls and insects presence leading to health problem like asthma, skill allergies, rashes etc.,the consequent spalling of concrete plaster, flaking off expensive paint on interiorexterior of walls adversely impacts life and value of structure. If the buildings are not waterproofed during constructions, it may result in costly and hassle prone repair work in future. Monarch's technologically advanced monoproof waterprooing systems cover every need of building & construction industry to protect from water ingress or loss of water through structures. The complete building structures from basement to roof are protected from rising dampness, moisture, seepages and leakages from basement to roof. The technology ranges to acrylic sbr latex, crystalline, epoxy, water repellant polysiloxanes, polyurethane and bituminous based formulations. The coating fills and seals concrete pores, micro cracks and capillary tracts in joints, walls and floors through which water seep through and forms an integral waterprooing compound without breaking the existing brickbat coba and concrete screed. Features • excellent resistance to hydrostatic pressure. • reduces water and chemicals permeability • protection from water ingress at high water table areas • protection from freeze-thaw cycles, corrosion, aggressive groundwater, sea water, carbonates, chlorides, sulfates and nitrates • can be applied to either new or existing concrete as a coating (from the positive or negative side). Application • retaining walls • foundation walls • parking decks • garden roofs • cooling tower • terrace • basement foundation • undergrond tank • overhead tank • reservoir • ponds & pools • drink & clean water storage tanks • roofs • balconies • wet rooms like bathrooms • kitchens • tunnels • podiums • external interior walls

Ameya perfomatt is the leading supplier and solution provider for paints & coatings. Ameya has partnered with hempel, which is a world-leading protective coatings supplier. These protective coating covers a wide range of application in the industrial world, from oil and gas and power generation to infrastructure and light industry. Our protective coatings are protecting industrial structures and essential infrastructure from the corrosive forces of nature. With a wide product range, we work with you to tailor each solution to meet the specific requirements of the environment and industry you operate in.

Perma Master Patch FL is a high performance epoxy resin based concrete repair system. Our Perma Master Patch FL provides a rough looking extremely strong bedding mortar for repair of industrial floors. Perma Master Patch FL is a two component product based on epoxy base and hardner. Moreover, Perma Master Patch FL needs on site addition of quartz sand as specified to make a mortar. Advantages : Abrasion resistant and hardwearing Slip resistant High Strength Repaired areas can be put to use faster

We specialize in consulting on the selection, implementation and maintenance of protective systems for various areas and structures. Protective coatings are applied to materials and equipment to prevent corrosion, abrasion, chemical damage, and other damage. We work across a wide range of industries including manufacturing, construction, oil and gas, marine, automotive and infrastructure.

We are reckoned as reputed Providers of Protective Coating in Rajasthan, India. The Coating that we offer is known for its perfect finishing and smooth touch. We can provide Product in different beautiful colors and textures. Our Layer provides protection against natural as well as unnatural damages. We can provide Protective Layer in different quantities at the most reasonable prices in the market.   Category Range Name List : Metal Protection - 2050 Polyhyb. 1040 Stangard Epoxy, Chemicoint RL 500, 1170 & 1180 Ceramic Coating Concrete Protection - 1311 Stangard Corrokote MVT, Stangard 4029 Novolac 754+727 Stangard Oil Soaked Concrete Water Proofing System Epoxy Floor Coating Stangard 1311 Insulkote Class A & B for Electrical Protection Firex EC 43  Electrical Power Cable Protection Coating Firex 250 Fire Barrier Coating Food Grade Epoxy Coating Chemical Resistant Coating

We are authorized distributor for Akzo Nobel; worlds largest Protective coating company. Protective coatings for corrosion protection and maintenance for Power, Oil and Gas, Chemicals and Petro chemicals and Mining and Metals sectors.

Rust Protective Coatings are formulated to provide long term protection to metal parts against corrosion. They prevent oxidation and curb the formation of rust in metal objects like pipes and machine parts. Our Rust Protective Coatings are highly durable and resilient. They can tolerate harsh conditions and provide uninterrupted service. We are one of the prominent Manufacturers, Suppliers and Exporters of Rust Protective Coatings from Maharashtra.   Availability : MCON RR : Rust remover is an effective cleaning aid for completely removal of rust from rusted surfaces. clean corroded reinforcement steel surfaces by wire brushing, remove loose particle and apply Rust Remover by brush. Next day remove the loose rust particles by brush. Used to remove rust of old and new steel reinforcement, water tanks, effluent plants, MS Pipes, etc. MCON RC : Single pack water based rust converter,non flammable, non poisonous and emits no harmful fumes. convert rust into inert iron complex, long term protection, reduces moistures vapor transmission, low VOC content, fast dry. Use in structural steel machnery, vehicles, railings furniture etc. Availabe in 1, 5, 10, 50, 100 ltr. containers. MCON CR : Protective, anto corrosive coatings for steel & reinforcement provides active corrosion protection of steel & reinforcement. Easy application by brush or spray. Pre-weighted pack. Excellent bonding with rebars and concrete. MCON ZRP : Two components, epoxy zinc rich primer for use in maintenance and new construction. It provides sacrificial protection for exposed steel including steel reinforcement. It resists corrosion by electrical and chemical means. Used as anti corrosive coatings for exposed steel, all mild steel strusture like bars, reinforcement, pipelies, water tanks, bridges, arches in marine enviroment etc. Coveage - 6-7m2 / Ltr @ 50-60 misrons thickness for single coat.

Our company is a highly acclaimed name that is engaged in offering Metal Protective Coatings to our clients that are applicable in a large number of industries like electronics, food processing, automobiles, engineering, pharmaceuticals and automobiles due to its high versatility and effectiveness. These coatings can be applied easily and have long lasting effects.

Protective Coatings : Rate : Rs.1500 Liter + Rs.300 Primer + Tax Range: Rs.1500- to Rs.4500- Specification : Ten years life of this coating, nano technology base coating. high performing best products. 20% ENERGY SAVING COVERAGE 30 Sq. FtLiter.

We are an eminent name as Manufacturer, Importer and Supplier of Protective Coatings. The Protective Coatings that we offer you are prepared under the guidance of experts and are totally reliable. Suiting the budget of each buyer, our Protective Coatings are extensively demanded by the buyers. We have the ability to make available even the bulk orders within the promised span of time.  Acquire from us a range of pocket-friendly Protective Coatings!

With us, clients can stay assured for the premium quality of the offerings as we keep them in healthy conditions. For this, we have developed a large storage unit. We make use of quality packaging material to circumvent loss while shipping. The kind of packaging we do is done under the supervision of veteran professionals. This is done to ensure that the product is completely safe.

Clients can avail from us premium Performance Protective Coatings available under the brand name Multi Crete. Performance Protective Coating (MULTI CREATE) is a two component hydraulic binder based product which is very effective for solving sealing problems on porous substrates. Performance Protective Coating is composed of a "Powder" consisting of hydraulic binder, chemical inert aggregates and waterproofing additives as one part and Resin Emulsion as the second part. The two components are mixed together to obtain a plasticized cement rendering. Once applied, Performance Protective Coatings constitute perfectly leak tight coating resistant to strong water pressure. Performance Protective Coatings work even against the normal negative pressure. The cured coating has the appearance of white, slightly rough rendering. Benefits Reacts in contact with water by crystallization.Bonds strongly to most of the building materials.Can be applied on a damp substrate.Forms micro porous coating which allows breathing of the substrate.Can be applied both indoor-outdoors, horizontal vertical surfaces in uniform thickness. Unaffected by UV light.Does not corrode reinforcing steel.Resists high positive water pressure and normal negative water pressure. Acts by perfectly plugging pores in concrete and masonry. Highly durable even in continuous contact with water. Resistant to water, dilute acid and alkali solutions.Non - dangerous and odorless.Resistant to fungus and microrganism growth. End Uses MULTICRETE is used as a protective performing coating in building - terraces, toilets & bathroom basements. It also acts as protection against corrosion and salt. It is used for sealing under positive water pressures in water reservoirs, water tanks, built up pits of all kinds, agricultural silos, swimming pools, sea water pools etc. Direction For Use Surface Preparation: Surface preparation is very important to get the best results and to avoid failure. The substrate must be clean and free of dirt, grease, sludge, fungus, cement coating blistered and loose plaster etc. Moisture is necessary for the effectiveness of MULTICRETE, therefore the substrate must be dampened with water, However, streaming water must be diverted by creating drains.Do not apply in rain. Before application of MULTI CRETE, seal the crack with any suitable sealant.Sealer / Primer Coat The concrete or cementitious substrates are highly porous. It is necessary to make the substrate less absorptive so that the top coats film thickness remains same. Krishna SEALER is highly elastomeric acrylic emulsion polymer without filled system has extra ordinary penetrating power which seals the porosity. Microcrevices of the substrate. It provides strong adhesion to the substrate and top coating. Due to non-filled system it overcomes the problem of linear stress and strain created in the substrate. Apply one coat of SEALER as a primer coat by brush. Apply the topcoat after one hour but within four hours of drying of SEALER coat. MixingAdd the powder (part 1) in to the liquid (part II) and mix manually until a homogenous semi - liquid without lumps, is obtained. The consistency of the mixture should be enable to give a good and smooth application by brush. ApplicationApply the first coat of MULTICRETE generously in order to plug the pores and shrinkage cavities. Within 24 hours, dampen the surface and then apply the second coat. Apply a third coat in the same way, if necessary. Moisten or wet the surface frequently for three to four days. Cleaning : Tools and equipments to be cleaned with water. Storage & Shelf Life : Store in cool dry place. Shelf life of the unmixed material is one year from the date of manufacture. Packing : 10, 20, 70 kgs duel packs. Precaution Do not apply over hot or dry substrate.Do not apply in rain.

Protective Coatings, energy savings, high temperature leak-resistance, insulation, fire protection and low friction. Ultra-Therm ULTRASLIDE - HT Ultraslide - S Ultracoat FP Ultra -ZCOAT Duraback Ultra Protect - SPL XTRA GRIP

Benefits:          • Forms a dry coating          • Excellent rust protection          • Easily removable thin film          • Superior penetrating property          • Optimum area coverage   Applications:          • Used in Castings, tools, pipes, dies, chucks, Drill rods,             moulds, bearings, shafts, Pistons, cylinders, valves,             keys, auto components,Spindles, measuring             instruments, fasteners,impellers          • Used in Semi finished and finished goods etc.