Rubber Springs Dealers

We offer faebi rubber air-spring. Faebi-rubber air-spring for highly, effective insulation of machinery and subassemblies against impact and oscillation. the bell-shaped component is made of high-grade elastomer. The construction allows a highly effective insulation without the disadvantage of excessive horizontal deflection. it is impossible for the element to break down as a result of overloading or a sudden drop in pressure. To reduce vertical dampening, the component is available with additional attenuation. the base plate is equipped with an anti-slip plate so there is no need to anchor the machine to the floor. Note: for outdoor use (e.g. Isolation of a roof top air condition unit) the faebi® can be supplied in stainless steel and epdm elastomer version.

Kronic™ Rubber Spring provides a new and unique way to make use of the many advantages of rubber as an industrial application fields because of their reliability, corrosion resistance, low cost, and basic simplicity.   When a coil spring fails, it will often crack allowing fragments of the coil to damage equipment. This problem is eliminated with the rubber construction of Rubber Spring. Additionally, Rubber Spring exhibit exceptionally high overload characteristics and usually do not fail catastrophically, offering some support even during failure. Rubber Spring have no moving parts.   No maintenance or lubrication is required and reduce structurally transmitted noise caused by vibration. The excellent performance has been proven in the damp and corrosive environments of mines and mills where a standard coil spring will fail. Due to the rubber construction, these springs do not bottom-out like coil springs under overload

Rubber moulding and Rubber-metal bonding has been Prag’s forte since the very beginning. Today, range of rubber products offered is amongst the most extensive in the industry and caters to Oilfield, Industrial, Automotive and Railroad applications. Our energy management rubber products include a range of rubber buffer, draft gear and side bearer springs for use on locomotives, passenger cars and freight wagons. We also manufacture a range of shear pads, compression mounts, spherical bearings, rubber springs, and bushes for use in EMD Locomotive and LHB Fiat Bogie suspension.

Rubber air spring for highly effective isolation of machinery and subassemblies against shock and oscillation. The bell shaped component is made of high grade elastomer. The construction allows a highly effective isolation without the disadvantage of excessive horizontal deflection. It is impossible for the element to break down as a result of overloading or a sudden drop in pressure. To reduce vertical dampening, the component is available with additional attenuation, see FAEBI®-HD below. The base plate is equipped with an anti-slip pad so there is no need to anchor the machine to the floor. Note: For outdoor use (e.g. isolation of a roof top air condition unit) the FAEBI® can be supplied in a stainless steel and EPDM elastomer version. BILZ Level Controller SystemsLevel control is an important part of an optimally functioning air spring system. Level control can be utilized whenever load changes occur on rubber air spring isolated machines, causing an unwanted one-sided spring deflection of the air elements, e.g. tilting of the machine.Isolation against Shock and OscillationDepending upon the static load, the natural frequency of the elements varies between 2,5 – 6 Hz in the vertical direction. The ratio between vertical and horizontal natural frequency is 1– 1,2. Maximum spring deflection during impulse load is approximately 15 mm.  Range of ApplicationExcellently suited for active isolation of high speed power presses, forging hammers as well as other machines and equipment with high dynamic forces. Passive isolation of measuring and testing machines as well as high precision machine tools. Systems can also be supplied with an option of electronic or mechanical level control!   AssemblyThe components are screwed on to the machine by means of predrilled holes. It is not necessary to anchor the machine to the floor. The machine is placed on deflated elements which are then inflated to a maximum of 5–6 bar via a standard valve. To level the machine, air can either be released or added. The maximum height adjustment available is 10 mm.Control of Air PressureUpon request, FAEBI® elements can be equipped with an air pressure monitor. This monitor will indicate if air pressure goes below the desired value. The mechanical-pneumatic control valves are a simple yet effective solution. The level is constantly scanned by a plunger. The plunger position in transmitted to a slide valve. Depending on the slide valve position, pressure is either applied to the air spring or vented from the inside of the air spring. The level can be maintained at an accuracy ± 0.1mm.Principally three control valves are used. The incoming air supply is conditioned with a pressure regulator to limit system pressure to a maximum of 6 bar & with a water trap to remove vapor and an air filter to remove dust andany foreign bodies from the air supply.

Clients can easily avail from us high grade Hollow Rubber Spring that is used in different applications and possess high strength. The Hollow Rubber Spring that we provide is highly flexible and is demanded by the clients based in different regions. Also, we are one of the prime Manufacturers, Exporters, and Suppliers based in India. Features Polymer and natural rubberHigh performanceDurableShock absorber bush Used In Tipper truck

Rubber buffer springs are very heavy duty composite blocks which undergo very heavy compressive & shear loads during operation. The spring rate ,compression ratio, etcof the springs are decided with respect to the type of vehicle (i.e. Locomotive/Passenger/Freight) TYPICAL CONSTRUCTION: The typical construction consists of 4 or more metal elements interleafed with rubber bonded between them.The buffers springs form part of the secondary suspension of the bogies, and are vital safety components essential for a smooth ride quality & efficient operation.   High Capacity Rubber Buffers. Rubber buffer springs. Rubber Springs.

We have abundant dealers, distributors connected with us to ensure our goods are obtainable for purchasers, and deliveries are made on time. The packaging commences strictly under the guidance of veteran experts and professionals, thus ensuring optimum packaging, keeping the products safe from various damaging factors.

Rubber air spring for highly effective isolation of machinery and subassemblies against shock and oscillation. The bell shaped component is made of high grade elastomer. The construction allows a highly effective isolation without the disadvantage of excessive horizontal deflection. It is impossible for the element to break down as a result of overloading or a sudden drop in pressure. To reduce vertical dampening, the component is available with additional attenuation, see FAEBI®-HD below. The base plate is equipped with an anti-slip pad so there is no need to anchor the machine to the floor. Note: For outdoor use (e.g. isolation of a roof top air condition unit) the FAEBI® can be supplied in a stainless steel and EPDM elastomer version. Range of Application: Excellently suited for active isolation of high speed power presses, forging hammers as well as other machines and equipment with high dynamic forces. Passive isolation of measuring and testing machines as well as high precision machine tools. Systems can also be supplied with an option of electronic or mechanical level control!

  A rubber bushing is a type of vibration isolator. It provides an interface between two parts damping the energy transmitted through the bushing.

Hangers prevent many installation errors by permitting degree of freedom of movement of piping thus frequently eliminating the need of Flexible Hose Connections.Wide range of Hangers are available with Helical Coil Springs for Low frequency applications, Rubber-in-Shear for absorption of Sound and Shock with Combination of Coil Spring & Rubber-in Shear for critical areas.

Our products engineered to withstand the heavy stress of the latest industrial vehicles equipped with pneumatic suspensions. They combine an ideal price-quality ratio for longer productivity at reasonable price. Continuous research exercise to stay ahead and deliver the best in competition prone environment. We have a rich product portfolio as well as proven capability to integrate various sub assemblies. We have earnestly embraced international best practices in manufacturing to deliver nothing but the best. We not only manufacture world class products but also manufacture trust and credence, the reason for which our esteemed customers reckon us always.