Shrouded Busbar System Dealers (22 products available)

We are offering dsl shrouded bus bar conductor system. ready available

We are renowned as one of the prime Shrouded Busbar System Exporters from India. The unmatched quality and unsurpassable performance has attracted various national as well as international clients to place bulk orders. The use of optimum quality materials in the manufacturing of the Shrouded Bus Bar System also ensures high durability, tensile strength and resistivity to adverse conditions. Additionally, we also offer Shrouded DSL Busbar System that complies with the international quality standards. We offer high quality Shrouded dsl power feeding busbar system for cranes & hoists. The options are GI / Aluminium / CopperRating : 60 A. to 250 Amp. Advantages : Very safe , Economical , Very good looking , Maintenance free.

• Color: RED YELLOW GREEN BLUE
• Voltage: 440 V
• Rated Current: 100 A
• Housing Material: PVC
• Quality: 250 GSM

We are offering shrouded bus bar. Shrouded bus bar(dsl) system are used for the electrification of mobile equipment. Shrouded bus bar is a safe, economical and low maintenance way to solve mobile electrification requirement. Systems can be designed to accommodate 60 to 1200 amperes. Depending on the application there are various options and accessories that can be custom engineered for your conductor bar system. Portions of the system can be pre-assembled at the factory to help ease installation. conductor bar can be found on overhead crane runways, hoists, trolleys, conveyors, port cranes and people movers. ›› cover with ultra violet additive for outdoor sun locations. ›› high temperature cover (280f) for all conductors. ›› stainless steel conductors in for corrosive atmospheres. ›› epoxy coated, stainless steel, and insulated hangers for wet an corrosive atmospheres. ›› factory built expansion sections and anchors for expansion control. ›› factory bent curved conductor sections systems. ›› a variety of covers for matching competitive systems. ›› heated conductor systems for ice prevention on outdoor systems or freezer storage. ›› totally enclosed covers with flap for air-born contaminants, indoor & outdoor versions. ›› bare conductors available for extreme heat applications. ›› special long-wear collector brushes for systems.

Owing to the latest manufacturing facilities, we are able to offer a range ofShrouded Bus Bar Systems. Theofferedrange of systems is safe, economical and further required low maintenance. These systems are manufactured at par with set industry norms and standards. We are offering these systems at industry leading prices. Moreover, these systems arestringentlychecked and verified on variegated parameters so as to offer an unsurpassed range of products to our patrons.

We are authorised marketing assosiate of ms suheel engineering co for saferack system in northern india , we supply & erected safe track shrouded conductor system , we have professionaly trainded erection team for safe track system . We supply safetrack system in uae , shri lanka, kenya napal, bangladesh . These bars are manufactured using the g.i , copper and aluminum with help of bolted or clamp connections these bars can be connected to each other and to other electrical apparatus. To reduce the contact resistance these bars have matching surfaces of silver-plate at the joints between high-current bus section. We offer the range of these products in various sizes and shape we supply safetrack system 60 amp -600 amp for any application

We offers a wide range of Shrouded Bus Bar that are designed using latest technology to suit the varied needs of the clients and used in diverse commercial applications and offers accurate longer and reliable operations. They can be specified as per the requirement by our clients and available in industry at leading prices.

DSL SYSTEM ALSO KNOWN AS DOWN SHOP LEAD SYSTEM Conductor Power Bar (DSL SYSTEM)Components & Specifications Power supply to the runway electrification shall be by means of bridge conductors and collector system as shown above. The typical components and specifications are as follows: Conductor Bar – Track are super finished and cross section is maintained to achieve required Ampere.The material for track is GI,Al/SS & Copper. Conductors shall be accurately aligned to ensure positive electrical contact between the collector and the conductor. Separate conductors shall be provided for each phase. More than one conductor in a single enclosure will not be permitted. Maximum voltage drop from the building power takeoff point for the track electrification system tothe hoist motor shall not exceed 4 percent, and the equivalent conductance shall not be less Size of bridge conductors shall be proportioned to limit the total voltage drop in the conductors to a maximum of 3 percent of the supply voltage when the current on the individual motors is full load. Power feed – This is an attachment for incoming power and is a fully insulated simple clamp type is easily installed anywhere on the system for incoming power to the conductor rails. The power supply to the runway conductors shall be controlled by a switch or circuit breaker located on a fixed structure, accessible from the floor, and arranged to be locked in the open position. A fused, manual disconnect switch with a lockable handle mounted through the panel door shall be provided and wired into the incoming power circuit. All power for crane shall be supplied through one main visible blade fuse switch located on the crane bridge in an easily accessible position. 3) Collectors - Current collector assembly consists of a spring loaded sliding contact type shoe of hard copper alloy or sintered copper graphite. Shoe shall be mounted in an insulating case of phenolic or urea compound of suitable temperature and insulation quality. Exposed parts of current collectors shall be grounded and of corrosion-resistant material. Current collector assembly shall be designed to operate through gaps, splices, and switches and shall be self-centering. System shall include expansion sections for every 150 meter for systems using galvanized steel conductors and every 175 meter for systems using copper conductors. 4) Hangers- Supports the conductor bar, may also be used as an anchor to direct movement due to expansion and contraction 5) End Cover- Used to close the end of the conductors to cover exposed conductor and avoid accidental contact. 6) Insulating cover –Insulation cover shall be rigid PVC, self extinguishing, with a heat distortion point of 160ºF at 260psi. 7) Connector pins - Used to join the conductor bar sections together . System shall be complete with unit length conductors, insulating conductor covers, insulators, splices and splice covers, end caps, support brackets and fasteners, current collectors, expansion, isolation and power-interrupting sections, disconnect switch, and conduit and wiring to power takeoff point. We manufacture Dsl system ranging from 60A to 1250 A Advantages Of Our Dsl System 1.Dip of the track is maintain properly for movement of Current collector 2.Center Powerfeed is provided to decrease voltage Drop 3.The play between Track & Sleeve is Minimum 4.Current collector is provided spring steel with max dia to avoid breakage We give Test certificate & Warranty Certificate for Dsl system & There erection for Period of 1 Year

We offer Shrouded Busbar System (DSL) that is used for the electrification of mobile equipment. Our Shrouded Busbar System is a safe and economical way to solve mobile electrification requirement. The Shrouded Busbar System can be designed to accommodate 60 to 1200 amperes current. Depending on the application there are various options and accessories that can be customized in Shrouded Busbar System. Portions of the Shrouded Busbar System can be pre-assembled at the factory for easy installation.Product Details : Conductor bar can be found on overhead crane runways, hoists, trolleys, conveyors, port cranes and people movers Cover with ultra violet additive for outdoor sun locations High temperature cover (280F) for all conductors Stainless steel conductors in for corrosive atmospheres Epoxy coated, stainless steel, and insulated hangers for wet and corrosive atmospheres Factory built expansion sections and anchors for expansion control Factory bent curved conductor sections systems A variety of covers for matching competitive systems Heated conductor systems for ice prevention on outdoor systems or freezer storage Totally enclosed covers with flap for air-born contaminants, indoor & outdoor versions Bare conductors available for extreme heat applications Special long-wear collector brushes for systems

We are offering shrouded bus bar. Conductor bar are used for power transformation conductor rail provide a safe & economical supply of electric power for track guided mobile machinery. Single pole individually insulated conductors. Ideally used for eot cranes etc.

MAGCO CRANES Insulated conductors are manufactured as per international practices and are designed for Indian conditions. They are finding wide acceptance due to multiple advantages they offer. MAGCO CRANES are very compact, easy to install, colour coded and flexible in installation. They are designed as per international standards of 14 mm, center distance, 4M standard lengths. They are suitable for straightcurbed sections, switchingsectionalizing assemblies etc. The conductors can be cut, bent, assembled at site for all type of installations. One or more feed points at any position possible. Joints are designed for expansion and contraction. All these advantages come at unbelievable economical prices.

• Feature: Properly insulated , Shockproof and Optimum finish

shrouded bus bar We are highly acclaimed in this industry for providing an optimum quality range of Copper Shrouded DSL Busbar System.

Made of PVC dielctric housing of tour poles. The conductors are freely installed in the housing. The power suplí is by end feed or by line feed. Possilbity to assemble in indoors or in outdoors with temperaturas between – 30 deg C to +60 deg C.

• Material: Mild Steel
• Brand Name: K.R.ENTERPRISES
• Country of Origin: Made in India
• Usage/Application: Used for the electrification of mobile equipment
• No. of Conductors: 4
• Finishing: PVC Coated

We are offering insulated bus bars ara available from 60 amperes to 1250 amperes rating. these are modular in construction and compact in size. spring loaded current collectors are supplied that ensure positive contract with current transmitting surface. Conductors are available in gi, aluminium, copper and stanless steel matrial. bus bars with expansion joint, hospital bay and suitable for curved track are also available.

Shrouded Bus Bar, Car Bumper, bus chassis, School Bus, Ambulance body

shrouded busbar system, Automation Products, weight operated limit switches

Shrouded Bus Bar, capsule lifts, Passenger Lift, service lifts