Silica Ramming Mass Dealers

We are supported by an advanced packaging system and make use of only high quality packing materials for ensuring complete safety during handling, warehousing and transit. Our team of quality experts strictly checks the entire range against varied parameters to make sure that they adhere to global quality standards.   Premixed Ramming Mass : We have been the leaders in promoting premixed use in big capacity induction furnaces. Our all the grades are available in premixed versions also. Premixed gives the following benefits to the user: Proper mixing of binder leading to optimum mixture. Less wastage, as mixing is done by machines. Only use imported Boric Acid is used to give best results. Consistent and longer lining and patching life. One less item in inventory.   Salient Features High Purity High Refractoriness High Spalling Resistance High Abrasion Resistance High Resistance to Cracking Freedom from iron Low Sintering time   Silica Ramming Mass Mixes Nature - Acidic Melting - 3274°F (1700°C) Acidic ramming mass is used in the lining of induction furnaces. Quality of acidic ramming mass is directly related to the heating performance of the furnaces. Better quality of lining results in the smooth working of furnaces, optimum output and better metallurgical control.   Granulometric composition of commercial silica ramming mass size percentage: 4 mm to 1 mm 33 % 1 mm to 0.20 mm 30 % 0.20 mm to 0.06 mm 17 % 0.06mm & Below 20 %   Our superior quality acidic ramming mass is stringently manufactured under strict supervision of qualified and experienced work force. Proper check is exercised on magnetic process to assure iron free Acidic ramming mass and to assure proper composition of granules according to furnace capacity.   FURNACE SPECIFIC BENFITS: We are the only far-famed manufacturer to give material as per the furnace capacity and make of the user. The granulation of the mix is optimized keeping in view the furnace make and capacity, thus giving maximum and best results.   Ramming mix is strictly characterized by thermal stability, corrosion resistance and wears resistance because it contains less binders, fire clay and moisture compared to plastic refractory. Recommended for lining the iron melting coreless induction furnace. Premixed with binder to customer's specifications.   Maximum recommended use limit- 3274°F (1700°C). Grades of Ramming Mass : We are the one of the manufacturer who provides material as per the furnace capacity and make of the user. The granulations of the mix are optimized keeping in view the furnace make and capacity, thus giving maximum and best results.Keeping in view the different needs, different types of scraps, end products and several other factors, we have got different grades:   Normal: This is the widely used grade of Silica Ramming Mix. Silica content here is in the range of 98.50 % to 99 %. This is the cheapest grade available. But performance is the best in its category.   Normal Premix: This is the pre mixed version. We mix Boric Acid as per customer requirements, although most common in India is 1.1 %. Recommended for lining the iron melting coreless induction furnace.

Acidic Ramming Mass is used in the lining of induction furnaces. Quality of Acidic Ramming mass is directly related to the heating performance of the furnaces. Better quality of lining results in the smooth working of furnaces, optimum output and better metallurgical control. It is manufactured under strict supervision of qualified & experienced work force. Proper check is exercised on magnetic process to assure iron free material and to assure proper composition of granules according to furnace capacity.The granulation of the mix are optimized keeping in view the furnace make and capacity, thus giving maximum and best results. It is characterized by thermal stability, corrosion resistance and wear resistance because it contains less binders, fire clay and moisture compared to plastic refractories Acidic ramming mass Acidic ramming mass is used in the lining of induction furnaces. Quality of acidic ramming mass is directly related to the heating performance of the furnaces. Better quality of lining results in the smooth working of furnaces, optimum output and better metallurgical control Granulometric composition of commercial silica ramming mass size percentage: 4 mm to 1 mm 33 % 1 mm to 0.20 mm 30 % 0.20 mm to 0.06 mm 17 % 0.06mm & Below 20 %

Silica Ramming Mass is recommend for SS Steel, Plain carbon steels (M.S.), Alloy Steels, Low manganese and low chromium steels, all graded cast iron, S.G. iron and malleable iron, alloy cast iron and Copper and its alloys Copper-Nickel up to 15% Ni etc. The Silica Ramming Mass has high refractoriness to hold operating temperature. The Silica Ramming Mass we offer has a high corrosion resistance towards steel & slag. The Silica Ramming Mass also has high electrical resistivity to prevent short circuit. Features Suitable up to 1730oC Consistent quality (purity 98.50%) Grain-sizes mixed according to capacity of the furnace Free of iron oxide (FeO) Minimum expansion & contraction at high temperature (treated) High refractoriness to with hold operating temperature High corrosion resistance towards steel & slag High electrical resistivity to prevent short circuiting

We offer silica ramming mass. Our silica ramming mass are high on purity. These are resistant to abrasion and spalling. They find their vast usage in various industries. We bring superior quality silica ramming mass which is acidic in nature having the melting point 3274 0 f. Our acidic ramming mass is widely used in the lining of induction furnaces.

Induction furnace silica ramming mass   induction furnace silica ramming mass is used in induction furnaces. It is sio2 (silicon dioxide). It is used in powder form for lining or ramming in induction furnace. We use good quality with high purity quartzite stone for the production of induction furnace ramming mass. Quartzite is broken and crushed in machines and then it is powdered.    proportion of the size of granules is known and granulometrics. Granulometric composition should be in such way that there should be minimum vacant or open space among the particles. An ideal granulometric composition of commercial induction furnace ramming mass is given below.    size percentage    4 mm   to        1 mm 33%    1 mm   to    0.20 mm 30%    0.20 mm to 0.06 mm 17%    0.06 mm & below 20%    proportion of the finest material is very important, as it takes part in the sintering reaction in furnace. If the fine particles are more than recommended percentage then it may lead to adverse effect of on performance of ramming layer.    please contact us for technical details of product and your requirement. We will be pleased to serve you for the best performance of your operations.

The silica ramming mass we offer is high on purity. Being resistant to abrasion and spoilage, silica ramming mass is used in the lining of induction furnace. The superior quality of silica ramming mass we offer has an extremely high melting point.

We are a leading manufacturer and exporter of Premix Silica Ramming Mass which contains  Boric Acid mixed with Pre-heated Ramming Mass. We recommend using our Ramming Mass (Premix), which will prove to be a good performer with its long lining life reducing cost of production. Our Silica Ramming Mass is a product of super snow white silica crystalline quartz having silica around 99% and manufactured under strict quality control. It is suitable with high temperature up to 1750oc. Proper check is exercised on magnetic process to assure iron free acidic ramming mass. Mixing of various quartz grains sizes in the exact proportion suitable for small, medium and large sizes of induction furnaces.Chemical Composition : Silica (SiO2) : 99% approx Alumina (Al2O3) : 0.04% Ferric oxide (Fe2O3) : 0.04% Potassium oxide (K2O) : nill