Stainless Steel Single Plate Wafer Check Valve
1,000 Per piece
10 piece (MOQ)
Single Plate Check Valve
300 - 1,100 Per piece
Best Deals from Single Plate Check Valve
single plate check valves
250 - 80,000 Per Piece
1 Piece (MOQ)
Are you looking for single plate check Valves? You are in the right place. Our company Metflow Engineers is the best. The single plate check valve is automatically held in a middle position by the flange connection bolts and hex nuts. It uses a swinging plate to prevent return flow in the piping system. The valve design allows them to be fitted in a tight space. The flow is restricted within the valve body because the flange connection is in place and there is not much room for the plate to open in the pipeline. The valve requires a low opening pressure to allow fluid to flow through. The valve is at the closing position and sealed with O-ring if the initial pressure is higher than the entrance pressure. Get the best check Valves from us today.
Single Plate Check Valve
700 - 15,530 Per Piece
100 Piece (MOQ)
Size Available 40 mm 50 mm 65 mm 80 mm 100 mm 125 mm 150 mm 200 mm 250 mm 300 mm 350mm
Single Plate Check Valve
200 Per Piece
Single Plate Check Valve
200 - 300 Per No
1 No (MOQ)
Single plate check valve (WCB, CF8, CF8M)
100 - 10,000 Per Per unit
Single plate check valve is well known as wafer check valve, single disk check valve or swing check valve. Single plate check valve is designed for return flow prevention in pipeline installation. They are constructed to be mounted directly between flanges according to DIN, JIS or ANSI standards.
Single Plate Check Valve
800 Per Piece
Wafer / Single plate Check Valves
Get Price Quote
Single Plate Check Valve
Get Price Quote
Our company is listed amidst the reputed Manufacturers, Exporters and Suppliers of a wide array of Single Plate Check Valve. Our Single Plate Check Valve is strong in built. Our professionals have used top quality materials in the manufacturing of Single Plate Check Valve. Our Single Plate Check Valve is recognized among our clients for its long lasting performance. Benefits To meet special applications and service conditions, Hi-Tech valves can be offered with much different metallurgy like Titanium, PFA Lined, Nickel, etc.It minimizes the piping support with the compact wafer style bodyMaintenance is minimal with the field replaceable O-ring seat available in all styles and sizes Minimum Order Quantity : 2 Units Material Shell : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless SteelTrim : 13% Cr Steel, 304, 304L, 316, 316L, 321, 347, F51, Monel Range Size Range : 1/2" - 30" Class : Class 150 / 300 Types : End Connection - Wafer Operation : Automatic
Single Plate Check Valve
2,200 Per Piece
10 Piece (MOQ)
Single Plate Check Valve - Soft Seated
Get Price Quote
Single Plate Check Valve
Get Price Quote
The check valve is used when the flow is needed only in one direction. The quality of a check valve is that it gets closed automatically to stop back flow. These valves are used in wide variety of location. One of the important precaution at the time of installation is the check valve should be downstream the flow of water. Regent Wafer Type Check Valves has distinct advantages over conventional Swing Check Valves.
Single Plate Check Valve
Get Price Quote
MATERIAL SPECIFICATIONS Body & Disk Cast iron I.S. 210 FG 200Cast Steel ASTM A-216 Grade WCBCast Stainless Steel CF8 & CF8M Seat & Body ‘O’ rings Nitrile, EPDM, Viton, Silicon, PTFE Other materials available on special request INSTALLATION The short face to face dimensions and the low weight guarantee a simple and space saving installation between the bolts of the connecting flanges.Flange sealing is obtained by O-rings. APPLICATION Water, Air, Oil, Gas, Steam or any other fluid. DESIGN FEATURE The design has distinct advantages over conventional swing check valves. Structurally sound Hydraulically engineered Stronger, lighter and smaller in size It weights 1/8th weight of conventional valve Lower pressure drop, hence lower energy loss. Flexible installation: Can be installed in horizontal or in vertical line, without any special pipe support. Water hammer and slamming almost eliminated. The light weight and short face to face dimensions of valve make it easy to install between standard gasket and line flanges.
Single Plate Check Valve
Get Price Quote
Single plate check valve are used in the industries like chemical, petrochemical, water and power plants. They are preferably used for high pressure and high temperature. They are available in small compact size to large size.
Single Plate Check Valve
Get Price Quote
EXPERT single plate, swing type Wafer Check Valves are used in pipelines to prevent backflow of the fluid. The valves are manufactured according to API 6D standard and tested in accordance with API 598. These valves are fast acting in closing, thereby maximizing protection to prevent or minimize the adverse effect of the back-flow. Opening and closing of the valve takes place at an extremely low pressure difference over the valve disc.
Single Plate Check Valve - Soft Seated
Get Price Quote
Single Plate Check Valve
Get Price Quote
Check valve is a mechanical device, a valve, that normally allows a fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various types of check valves used in a wide variety of applications. Although they are available in a wide range of sizes and costs, many check valves are very small, simple, and or cheap. Check valves work automatically and most are not controlled by a person or any external control; accordingly, most do not have any valve handle or stem. The bodies (external shells) of most check valves are made of metal. An important concept in check valves is the cracking pressure which is the minimum upstream pressure at which the valve will operate. Typically the check valve is designed for and can therefore be specified for a specific cracking
Single Plate Check Valve
Get Price Quote
BODY ASTM A 361 Gr CF8 | CF8M | CF3 | CF3M DISC SS 304 | SS 316 SPRING STAINLESS STEEL SPRING RETAINER AISI 304 | AISI 316 SEAT METAL TO METAL | EPDM | NiTRILE | PTFE INSP & TEST STD API 598 ENDS WAFER TYPE FOR 15 MM TO 200 MM SCREWED END FOR 15 MM TO 100 MM HYD-TEST PRESSURE BODY : 854 Psig (60 KgCm ²) SEAT : 569 Psig (40 KgCm ²) SIZE RANGE 15 MM TO 200 MM
Single Plate Wafer Type Check valve
Get Price Quote
Jameel Trading Company ia one of the authorized dealer ofSingle Plate Wafer Type Check Valve in Chennai. Its popular among clients because of its long lasting life Performance and coustomers trust on our products. Rating PN 10 Manufacturing Std: API 6D Face to Face: API 6D(long pattern)/ ANSI B16.10(long pattern) End connection: Wafer to suit ANSI B16.5 150#/DIN 2542(PN 10)/DIN 2543(PN 16)/BS 10 Table ‘D’/’E’ Inspection and Testing Std: API 60/API 598
Single Plate Check Valve
Get Price Quote
SINGLE PLATE WAFER CHECK VALVES
Get Price Quote
Single Plate Check Valve
Get Price Quote
Single Plate Check Valve SPECIFICATION:- SIZE: 2″ TO 20″, CLASS: 150# 300# 400# 600#, END : WAFER TYPE FLANGED, STANDARD: API 6D API 594, FIRE SAFE: API 6FD, MOC : WCB CF 8 CF 8M CF3 CF 3M CN 7M, OPERATION : NON RETURN VALVE.
single plate check valves
Get Price Quote
STARTEK Single Plate Wafer Check Valves conform to API 6D-ISO 14313/API 594/API Pressure Ratings to ASME B 16.34 class 150(PN 20) through 2500(PN 420) and API Pressure class 2000PSI through 10000 PSI and class 125,PN10 through PN40 Single Plate Wafer Type Design suitable for mounting between flanges. One piece body cofiguaration provides reduced weight and size.this results savings in initial cost.space and pipe support element installation Extremely low crack opening pressure Low pressure drop Efficient flow characteristics Lapped body / disc seats No fugitive emissions Option Short pattern and long pattern Closure assisted by spring loading Soft seat
Flowell Wafer Design Single Plate Check Valve
Get Price Quote
Mounting : Suitable for Both Horizontal and Vertical Installation Design : Single Plate Wafer Type Swing Check Valve Face to Face : API594 Flange Drilling : BS10 Table E ANSI B16.5 Class 125/150 Leakage Class : Zero Leakage, Minimum Pressure : 1 Bar Valve is used for preventing the back-going of medium in pipelines and equipments, and the pressure of medium will bring the result of opening and closing automatically. When the medium is back-going, valve disc will automatically closed to avoid accidents.
Single Plate Check Valve
Get Price Quote
Single Plate Check Valve
Get Price Quote
Wafer Type check valves CI/CS/Steel body constructed flap type, Single /Dual design, Pressure rating PN-10 & PN-16, Sizes are available in 40mm to 600mm.
Single Plate Check Valve
Get Price Quote
By keeping track with the latest market developments and desires of our revered clients, we are occupied in offering Single Plate Check Valve. Offered check valve is tested in terms of quality by our experts in order to dispatch a faultless range. This check valve is manufactured using excellent class material and cutting edge technology at par with set standards of industry.
Single Plate Check Valve
600 Per Piece
1 Piece (MOQ)
Single Plate Check Valve
Get Price Quote
We are manufacturing from 50 mm to 600 mm Wfer Type Single Plate Check Valves in Class PN 10 & PN 40 For all applicationService Media
