Spectrum Analyzers Dealers

  An Optical Spectrum Analyzer (OSA) is a precision instrument designed to measure and display the distribution of power of an optical source over a specified wavelength span. An OSA trace displays power in the vertical scale and the wavelength in the horizontal scale. » Visible Wavelength Optical Spectrum Analyzer AQ6373B» Telecom Optical Spectrum Analyzer AQ6370D» Long Wavelength Optical Spectrum Analyzer » AQ6375 Viewer

Optical signal-to-noise ratio (OSNR) has long been recognized as a key performance indicator in wavelength-division multiplexing (WDM) networks, because it provides a multichannel assessment of signal quality in a very short time. OSNR also predicts bit error rate (BER) within just a few minutes, while typical BER tests must run for hours or days.Intelligent in-band OSNR measurement for 40 Gbits and ROADM deployments * Automatic impairment identification for faster troubleshooting * Compliant with ITU-T G.697 recommendaton

We are offering triarchy- spectrum analyzer, usb mini spectrum analyzer • frequency ranges up to 12.5 ghz • frequency span is 1mhz to 1000mhz • sweep time for tsa is x1 to x32, basic scanning is around 2.3 s, and fast scan is around 0.2 s • amplitude ranges from -110dbm to +30dbm.

FSH spectrum analyzer is rugged, handy and designed for use in the field. Its low weight, its simple, well-conceived operation concept and the large number of measurement functions make it an indispensable tool for anyone who needs an efficient measuring instrument for outdoor work

Starting from 1GHz up to 26.5GHz, Tracking generator and various measurement facilities. LISNs, EMI software, EMI analyzers, RF Probes, Antennas. Spectrum Analyzer HM5510 1 GHz Spectrum Analyzer HM5014-2 1 GHz Spectrum Analyzer with tracking generator HM5530 3 GHz Sprectrum Analyzer EMI/EMC Solution EMCIS EMI Analyzer EA-2100 EMCIS Filer Analyzer FA-2000 EMCIS Filer Analyzer FA-2100 EMCIS EMI Spectrum Analyzer ESA-2000 Hameg Line Impedance Stabilization Network HM 6050-2 EMCIS Line Impedance Stabilization Network LN2-16 EMCIS Line Impedance Stabilization Network LN-20 EMCIS Line Impedance Stabilization Network LN4-50/100 EMCIS Power Line Filter LF1-16A EMCIS Shielded Chamber HZ 530 EMV Near Field Probe set upto 1 GHz EMCIS DC Bias Source

Reliability – The most trusted OSAs in the world thanks to their unmatched measurement accuracy, robustness and proven quality. Performance – Best in class, state of the art and high-precision instruments that keep pace with the ever changing and fast evolving optical technology. Expertise – For more than 30 years our R&D and Product Specialist teams have been listening to the needs of OSA users to continuously provide them with innovative and effective solutions for their measuring challenges.     

The ability to measure smaller signals: on the basis of this technology, the IF filter enables smaller bandwidth settings, which greatly reduce the displayed average noise level. The ability to distinguish between small signals by frequency: using the IF filter with the smallest bandwidth setting, it is possible to make out signals with a frequency difference of only 10 Hz. High precision amplitude readings: this technology almost eliminates the errors generated by filter switching, reference level uncertainty, scale distortion, as well as errors produced in the process of switching between logarithmic and linear display of amplitude when using a traditional analog IF design. Higher reliability: compared with traditional analog designs, the digital IF greatly reduces the complexity of the hardware, the system instability caused by channel aging, and the temperature sensitivity that can contribute to parts failure. High measurement speed: the use of digital IF technology improves the bandwidth precision and selectivity of the filter, minimizing the scanning time and improving the speed of the measurement. Product Features All-Digital IF Technology Frequency Range from 9 kHz to 3.2 GHz Min. -148 dBm Displayed Average Noise Level (Typ.) Min.

MWIR WAVELENGTH with internal gas purge and cut filter The AQ6376 is the latest version of our bench-top optical spectrum analyzer extending the wavelength coverage well beyond the NIR range of our previous models into the MWIR region from 1500 to 3400 nm. Popular applications include the detection of gases such as carbon oxides (COx), nitrogen oxides (NOx), and hydrocarbon gas (CxHy) for environmental studies. Similar to the long wavelength model, it offers the added benefits of gas purging input ports / output ports, a built-in cut filter for high order diffracted light, and a novel double speed mode which increases the sweep speed up to 2 times compared to the standard sweep mode.

The MS2724b Series Spectrum Analyzers are high-performance instruments that incorporate various advanced microwave and digital technologies using micro-processor. These spectrum analyzers are used for measuring a wide range of low to extremely high frequencies. The major applications of this series include multiple testing for the development and production of high-frequency devices and components, analyzing spurious signals and spectrum distribution and the modulation characteristics of radio equipment, and monitoring spectrum and interference wave measurements at microwave radio stations (ground and satellite stations).

Address evolving test needs—from unbounded in R&D to just enough in manufacturing—with diverse hardware platforms. Accomplish deeper troubleshooting or one-button measurements with the broadest set of application-specific software. Get results you can trust based on proven measurement science and a commitment to measurement integrity, whether you are optimizing your test for performance or throughput. Achieve greater longevity of your test assets with upgradeable features and performance.

• Up to 7 GHz• Base performance: general purpose, consumer electronics, R&D, manufacturing• Up to 1 MHz analysis bandwidth• PowerSuite 1-button power measurements

The increasing wide-spread use of wireless applications as well as the requirement for minimizing electromagnetic emissions from high performance digital systems caused a change of approach in design labs and test sites. While signal analysis in the time domain is well established, spectrum analysis is now starting to find its place on the lab bench. The scope of applications of a spectrum analyzer in R & D, test sites, service and EMI testing is wide. Spectrum analyzers can display signals up into the GHz range. LISN ( Line Impedance Stabilization Network) , Near field probes in conjunction with EMC software offers very cost-effective solutions to active (emission) measurement problems which allow to perform precompliance measurements.

We are offering comprehensive range which works of wide band of frequencies. These instruments work as standalone as handheld device as well as interface via USB cable to PC running the simulation software. The complete range is specially manufactured in compact, lightweight designs. During the implementation, designing and installation of the network, it is essential to know the interference. Moreover, it is also important to know the signal strength as well as throughput of the signals. This instrument helps in monitoring such things. Our complete range is based on the latest technology to ensure highly precise and accurate measurement. We are offering our range in domestic as well as in international market. The interested clients should contact us to get our range.

Product Features Compact and lightweight 1.8kg Large and color TFT display Four hours battery operation USB Memory USB communication Accurate frequency measurement by PLL synthesizer Average noise level -127 dBm 100dB display dynamic range Easy operation by AUTO mode Competitive function Abundant options