Stenter Machine Dealers

Stenter machine is used for visual colour matching of textiles, paints, link, plastics, paper, etc. with the help of different light sources. We guarantee that it offers a standardized viewing environment for visual color evaluation leading to faster and accurate color decisions at your end.

We are offering stenter machines. (edit post) stenter machines: all over the world, people associate krantz’s stenters with outstanding process results in knitting and woven fabric finishing. Today the k-10 and k-20 single layer stenters have an established worldwide reputation as “classics”. the new k-30 has an uncompromising further development of the series, combines proven components with innovative technology solutions. krantz fabric stenter machine stenter machines offer unique advantages: turbo mixing zone with long lead zone and intensive air mixing. large pressure chamber for uniform air distribution thru the nozles. burner with large control range (1:40) combustion air fan insensitive to impurities. directly couple fan drive ( no v-belt), two speeds, optionally with continuously variable speed, standard motor. radial fan with optimized deliery for maximum water evaporation.

1. Stenter Clips of Any Make like Artos, Dhall, Harish, Yamuna, Hi-Tech, S.M., Stenmech Lucy , Bharat Eng., Monfort, Montex, Swastik, Bruckner, Babros, Ambika, Famatex, etc. 2. Chain Link & Bottom Parts (Pin Block, Loop Chain) of Any Make Stenter Machine 4. Gear Box Parts (1248 T, 1751 Teeth - Spiral Bevel, 2143 T Helical Gear (Spline Shaft) Main Drive Sprocket Wheels - Hardened & Grinding). Servicing can also be done.

Due to our enormous understanding and massive knowledge of this business, we are involved in the manufacturing of Stenter Machine. Offered machine or apparatus is used for stretching or stentering fabrics. The purpose of this machine is to bringing the length and width to predetermined dimensions and also for heat setting and it is used for applying finishing chemicals and also shade variation is adjusted. The main function of the stenter is to stretch the fabric widthwise and to recover the uniform width. This machine also has the capacity to controls the Shrinkage property of the fabric in an efficient manner.

Stenter Machine Pneumatic padding mangle : We are leading Stenter Machine Manufacturer India. The main structure is fabricated out of heavy duty M.S. –plate and incorporates with entry device, rubber and ebonite squeezing rolls SS. Tank fitted with SS. Guide rolls and pneumatic pressure system.

High Speed & Stability: Rapid Heat setting/Finishing/Drying Easy operation & maintenance Less spare parts consumption Produced in working widths from 1600 mm to 3300 mmHeat loss negligible by improved InsulationHorizontal and Vertical Lint screen systemSuitable for Steam /Thermo Oil/Gas Heating System     FEATURES   Perfect Width Stability Starching and Resin setting Even temperature throughout the Chamber Perfect removal of Volatiles from the Fabric Minimum maintenance Minimum Heat loss through perfect Insulation Maximum production

We hold expertise in offering a superior quality range of Chain Link. Our products are broadly demanded in varied industries due to their superior design and styles. These products are available in different customized and standard specifications to suit the specific requirements of the clients.Our clients can avail from us an exclusive collection of Metal Chain. These products are offered to the clients in variegated specifications and dimensions. Our transport chains are majorly used in monforts stenter machines. These can also be tailor-made as per the specifications given by the clients.

STENTER MODLE- SUPER 9 We are one of the best leading manufacturer and supplier for hot air stenter. We are manufacturer our hot air stenter with oil heating system. We are offering superior quality of stenter to fabricate it and provided at industry leading price. Advantages of New Nozzle System: Extreme evenness of temperature distribution Maximum drying and heat transfer efficiency Excellent dimensional stability by heat setting More coverage area of hot air on the fabric due to new nozzle system Power saving, due to high efficiency axial flow fan  

Heavy Duty Clip/Pin Stenter Machine with Pneumatic/Mechanical big batchine system, Available in 24"-32"-40"-48"-56"-64" length and working width 60" To 120" with DC. Drive or AC. Drive.       Comprising of 2-Bowl Padding Mangle-Drying Cylinders, Gas/Kero Gas Stenter - DC.Drive.     Latest in a long line of pedigree performance :* Superior Symetrical Air circulation *Innovative nozzle desing *Reduced floor area *Simple in Operation and Maintenance. *Precise fabric and machine controls. .          

Mangles frames are made from combination of steel section and plates. Main rollers are made from seamless tubes and covered with ebonite rubber covering (hardness of covering ranges from 65o to 100o Shore A). Rollers are loaded pneumatically against each other to create desired loading pressure. Main roller is driven by worm reduction gearbox and motor, speed of the motor is controlled by frequency converters. Liquor troughs and trough rollers are made from stainless steel, they are designed to take minimum liquor quantity. For easy cleaning purpose trough can be easily lowered. Scroll roller Bow roller is provided to remove the creases before the fabric is squeezed.In fig. 1 mangle with 3 rollers (2 dip 2 nip) in inclined position offered as a standard version. In fig. 2 mangles with 2 bowls in horizontal position are shown for wet on wet application. Optionally, mangle with hydraulic (deflection controlled) roller can be also provided.

Hot air stenter machine The global textile industry is metamorphosing, with the advent of an increasing number of international players. This has created a need for modern production processes that conform to global standards. Moving in this direction, InspirOn Engineering Pvt Ltd. offers a sophisticated stenter, which meets the demands of textile finishing globally.

Mangles frames are made from combination of steel section and plates. Main rollers are made from seamless tubes and covered with ebonite rubber covering (hardness of covering ranges from 65o to 100o Shore A). Rollers are loaded pneumatically against each other to create desired loading pressure. Main roller is driven by worm reduction gearbox and motor, speed of the motor is controlled by frequency converters. Liquor troughs and trough rollers are made from stainless steel, they are designed to take minimum liquor quantity. For easy cleaning purpose trough can be easily lowered. Scroll roller Bow roller is provided to remove the creases before the fabric is squeezed.

We have excelled in the art of making top notch stenters for over 50 years.SUPRA 5 DLXiN – is specially designed to get 20% more production at a lower electrical power consumption.This is achieved with the change in airflow and heat transfer systems, and our tenter can be adapted and modelled to suit the requirements such as Finishing, Drying, Curing, Dehydration or the Heat-setting of woven and knitted fabrics.

This is achieved with the change in airflow and heat transfer systems, and our tenter can be adapted and modelled to suit the requirements such as Finishing, Drying, Curing, Dehydration or the Heat-setting of woven and knitted fabrics.

We Manufactures Stenter Machine Spare Corrosion and abrasion resistant, Resistant to heat and temperature, Pressure resistant, High functionality, Easy installation.

OPTIMA 2510 from SWASTIK is a very compact modular and highly efficient Stenter, offering high reliability, optimum results and maximum output. It is equipped with advanced technology for optimum energy efficiency and quality of production. Its scientific design and well studied execution ensures aerodynamic air flow, considerably reducing the energy consumption. The streamlined construction enables easy approach to all components and ease of maintenance. The machine can be supplied suitable for various heating media like Steam, Thermic Oil circulation, direct fired Gas etc.     Stenter - Fabric Feeding The In-feed system can be supplied suitable to take up fabrics either from batches or loose folds. The machine can be supplied with a J-Scray or an Accumulator for continuous operation. OPTIMA 2510 Stenters are provided with very efficient un-curlers and Infra-Red Edge Sensors which actuate the in-feed device provided with Rack and Pinion system, ensuring perfect fabric holding in clips or pins even at high speeds exceeding 100 meters per minute.   Stenter - Over Feed A simple and accurate over-feed system using Variable Frequency Drives with AC Geared Motors ensures perfect and precise Over-feed control as required by the fabric, ranging from -10% to +50% by control of motor speed. It is very simple and easy to maintain. Separate drives control the Fabric Tension and Selvedge Tension rollers. A closed loop control system with encoder can be provided for precise control of the drives.   Stenter - Weft Shrinkage Conicity of rails can be easily obtained by acting upon the individual width controlling screws of each compartment, de-clutching the individual unit from the main width adjustment control system and adjusting the individual rail to precise requirements, by acting upon each gear box provided on individual adjusting screw with the help of a hand-wheel. A suitable indication is provided on each gear box for precise control. It can also be automatically regulated as pre-programmed by acting on individual motors, with PLC Control.   Stenter - Chain Rails Properly seasoned Cast Iron chain rail guides are provided to support the moving pin clip chain. They are strong and distortion free even when operating at elevated operating temperatures and at speeds in excess of 150 meters per min. Various combination of entry and exit chain rails are supplied for different applications. Extended entry rail track up to 6.3 meters can be provided which can support the Fabric feeding device, the Steaming device, Selvedge Gumming and pre-drying unit etc. Extended exit rail tracks up to 5.8 meters length can support the conventional Air Cooling zone, Selvedge Trimmer, Chain cleaning device etc.   The clips are made of several individual, pressure die-cast, easily replaceable components. These components are made from special corrosion-resistant aluminum alloy and are distortion-proof even at the high heat setting temperatures, These components are very well studied to the lowest individual details and are designed to ensure long trouble-free performance with all kinds of fabrics. The steel shoe holding the clips are fitted with sintered metal liners and connected with steel links. The roller chain glides smoothly on special cast iron rails. The superb sliding properties of sintered metal considerably reduces lubrication requirements even at the high heat setting temperatures, thus ensuring safe operation and long life. On request, the machine can be equipped with special polymer liners for lubrication free working. Optima 2610 is equipped with a vertical return pin chain.   Stenter - Chain Cleaning Device   SWASTIK OPTIMA 2510 can be equipped with a suitable chain cleaning device with steam, consisting of a set of hard-chrome plated nozzles with flexible steam connections, for easy and fast cleaning of pin-clip chain.   A simple motorised, quick acting two-roller Bow and four roller Skew Weft Corrector is provided for efficient correction of weft distortions. Alternatively, on request, the machine can be equipped with Automatic Weft Corrector with optical sensors and digital control. Additional sensors can be fixed on the machine exit to ensure perfect weft straitening.   Stenter - Width Adjustment   The OPTIMA 2510 is equipped with a standard motorised width adjustment device with common shaft with gear boxes mounted on top of the dryer. The width adjustment device is controlled from the control desk by means of push buttons. Setting of individual screws can be done by means of a handwheel acting through the clutch on individual gear boxes. The OPTIMA 2510 can also be equipped with individual motors and controllers for the individual screws which are controlled from the control desk either individually or all at a time. A suitable indicating arrangement is provided on the Operator Console.   DRYER MODEL RDB – 3000 is a modular dryer which can be assembled as required. The low volume design Dryer RDB - 3000 is equipped with a specially designed duct with the Heat Exchanger / Burner at one end. The Blower is fixed at the other end. The inter-connecting duct does not permit any infiltration of air into the circuit without heating. Jet nozzles are designed to obtain maximum evaporation from the fabric and are specially designed for the specific fabric requirements. The Dryer RDB - 3000 is a compact, sturdy, simple and efficient Dryer equipped with a closed circuit air circulation system, using Radial Blowers directly coupled with AC motors which can be controlled by Invertors. Basically the RDB - 3000 occupies less space and has lower energy consumption. All drive elements are fixed outside the heated area and are accessible from outside. The Dryer RDB – 3000 is equipped with insulating panels filled with high density insulating material for minimum radiation losses. Specially designed jet nozzles at the entry and delivery end ensure minimum heat loss through escaping hot air.   The blowers are mounted directly on the motors mounted outside the machine and are easily accessible. The blower speed is regulated through Variable Frequency Drives. The high volume jet nozzle elements are specially designed for perfectly even air flow to the fabric. The special design provides better fabric support, gentle heat transfer and reduced energy intake. Different nozzle shapes for different applications ensures higher productivity for different quality and types of fabrics, distortion free for delicate and knitted fabrics and are suitable even for pile fabrics. Air distribution to the fabric from the top and bottom nozzles is regulated through dampers fixed in the circuit. The dryer RDB – 3000 can be supplied with different heating media. The machine is equipped with multi-pass finned tube type heat exchangers with a large heat exchange surface for quick heating with Steam or Hot oil circulation or large firing area for Direct fired Gas Burners.  

Stenter is a machine or apparatus for stretching or stentering fabrics. The purpose of the stenter machine is to bringing the length and width to pre determine dimensions and also for heat setting and it is used for applying finishing chemicals and also shade variation is adjusted. The main function of the stenter is to stretch the fabric widthwise and to recover the uniform width.   After stentering we can increase the width of the fabric up to 1.5-2 inch.The speed of the machine is about 7-150 m/min.3 meters fabric can run in each chamber.temperature is adjusted that according to the fabric blend.   Advantages of Stenter in Fabrics GSM of the fabric is controlled by Stenter. Width of the Fabric is controlled by Stenter Fabric is dryed by the Stentering Process. Shrinkage Property of Fabric is Controlled Moisture is controlled by the Stenter. Loop of the Fabric is controlled by Stenter Spirility of Fabric is controlled by Stente