Tensile Machine Dealers

• Reference Standards: ASTM, ISO, IS
• Load Capacity: 500 Kg with 10 gram resolution (others optional).
• Load cell: 1 No (Others optional).
• Cross Travel: 1000 mm with 0.01 mm resolution.
• Test Speed: 10 500 mm/Minute (others optional).
• Reports: Graphical + Data through software
• Units: KG; Newton; Pound; cm; mm; inch.
• Data Merging Facility: Available
• Accessories: Pneumatic Grip– 1 Pair
• Supply: 230 VAC/50 Hz
• Paint: Powder coated
• Special Features: Table Top Model.

• Certification: ISO 527, ASTM D 638, ISO 37 and equivalent.
• Country of Origin: USA
• Brand Name: JJ-Test

We are the reputed supplier and importer of utm-0400 electronic tensile machine in india - contact us now to get quick quote for utm-0400 electronic tensile machine in india by jj test.

• Number Of Flower: Tensile Testing Machine
• Application: Determination Of Tensile Resistance In Dry Or Wet State
• Start Mechanism: Automatic After Clamping
• Return Mechanism: Automatic To Starting Position After Sample Break

For determination of tensile resistance in dry or wet state, elongation and tensile energy absorption(TEA). Paper and Tissue. Features ◉ Easy to operate due to touch screen controls. ◉ Automatic sample detection, clamping and start after clamping the sample. ◉ Automatic return to starting position after sample break. ◉ Pneumatic clamps with standardized clamping surfaces. ◉ Possibility of selecting and defining multiple test results (breaking force, tensile index, elongation, tensile energy absorption (TEA ), etc.). ◉ Different configurable units for the force, extension and speed parameters. ◉ CE Marka. ◉ Setting of different breaking and preload levels. ◉ Periodical programmed updating (without additional costs) ◉ Determine the wet tensile

• Feature: Controlled By Digital Temperature
• SPECIFICATIONS: It is use to determine Tensile Strength of shell sand in hot condition.

The Presto Tensile testing Machine is highly recommended for evaluating the tensile strength of products and materials. The equipment is based on the Constant Rate of Traverse (CRT) principle. It is equipped with an upper jaw and a lower jaw. While the upper jaw is stationary, the lower one can be moved at a designated fixed speed with the help of a motor. The test specimen is held between the two jaws. The lower jaw is gradually made to move to evaluate the tensile strength of the sample. The motor is equipped with a gear Box and a lead screw arrangement. The machine also incorporates a special sensor, connected with a load cell. The sensor is capable of judging the load exerted on the stationary jaw and directly indicating the reading in kgs (in digital format). There are special case hardened lead screws which ensure stability and durability. It incorporates a standard branded motor and CE standard electrical wiring. The completely modular construction of the Presto Tensile Testing Machine ensures trouble free maintenance and easy operation.

• Country of Origin: 230 V
• Operating Mode: Manual
• Material: Mild Steel
• Display Type: Digital
• Frequency: 50 Hz
• Brand: BI Sevices
• Usage/Application: Laboratory
• Phase: 1
• Least Count: 0.1 kgf

We are leading Tensile Machine - Computerised, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India.   As per as per ASTM D - 638 / ASTM D – 882   Model: AE-TT-C-1LC-500 Reference Standards: ASTM, ISO, IS   Specifications : → Load Capacity: 500 Kg with 10 gram resolution (others optional). → Load cell: 1 No (Others optional). → Cross Travel: 1000 mm with 0.01 mm resolution. → Test Speed: 10 – 500 mm/Minute (others optional). → Reports: Graphical + Data through software → Units: KG; Newton; Pound; cm; mm; inch. → Data Merging Facility: Available → Reports Contain: Peak load, Break load, Yield Load, Elongation @Peak load, Elongation     @break load, Elongation @yield load, Tensile Strength @peak load, Tensile strength @break     load, % elongation @peak load, % elongation @break load, % elongation @yield load, Young’s     modulus, Load Vs Elongation graph. → Accessories: Pneumatic Grip– 1 Pair → Supply: 230 VAC/50 Hz → Paint: Powder coated   Special Features : Table Top Model.    

• Load Resolution in Kg: 0.03,0.05
• Size (w x d x h) in mm: 300 x 430 x 1100

Hand Operated Tensile Testing System, the two column frame with a hand wheel operated lead screw is a perfect tool for tension, compression and flexural testing of springs, rubber, paper, film etc., with apt attachments. These are appreciated for their durability, accuracy of results and high tensile strength. It is a better Tensile Tester Machine having variety of applications.

Tensile test is a measurement of ability of material to withstand forces that tends to pull it apart and to determine to what extent the materials stretches before breaking   Application : Tensile is the universal test applied to many polymers to check the mechanical properties and it is the most improtant property as majority of end use application involved some degree of mechanical loading & properties like Tensile Modulus, Elongation, Compression etc. are calculated using this machine.   USP : The "Surya has some unique models developed with versatility in mind. Surya UTM's can be used with our without using P.C. Universal Software capable of performing test on any type of materials. Test on high & low loads with different cross head travel speed can be performed The "Surya" tensile offers testing flexibility and ease of use via an intelligent electromechanical system data transfer. ratio of load cell to instrument is 24 bits to give instateneous readout of data during process. The Surya versatile software helps to visualize the process and behavior of materials in form of data and graphs with all the calculated results required. Units of weights "Newton" or "Kilograms" can be selected from software. Round or of any different shape materials can be prespecified on specification window for direct calculation of area.  

• Application: Testing Strength Of Material
• Availability: 200-300kg, 300-400kg, 400-500kg
• Packaging Type: Black, Blue, Green, Grey
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic
• Driven Type: Electric
• Total Carbohydrate: 1year, 2years, 5years

• Opening in upper clamp: 30.5 mm diameter
• Opening in lower clamp: 38.1 mm diameter
• Rate of fluid displacement: 95 cc/minute
• Test Fluid: Glycerin
• Pressure range: Range Up to 7-21-28-35 Kg/Cm2 x0.2 Kg/Cm2

Bursting strength of any material such as fabric, leather, paper etc. Is its strength under action of a multidirectional force and is defined as the hydrostatic pressure required producing rupture of the material when pressure is applied on one of its surfaces at a controlled increasing rate through a rubber diaphragm.  

• Application: Testing Strength Of Material
• Availability: 400-500kg
• Automatic Grade: Automatic
• Driven Type: Electric
• Total Carbohydrate: 2years
• Quality: Optimum Quality
• Display Type: Digital

• Number Of Flower: Tensile Testing Machine
• Certification: CE Certified, ISO 9001:2008
• Availability: 400-500kg
• Country of Origin: 380V
• Condition: New
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Mechanical
• Total Carbohydrate: 1year
• Country of Origin: CHINA
• Size: 1750x3310x1220
• Brand Name: ASLI
• Application: Plywood, Wires, Cables, Conductors, Ferrous And Non-ferrous Material
• Capacity: 500

We are offering Tensile Testing Machine. The designing of our digital tensile testing machine is done according to the astm d-638 along with confirming to other quality standards. Our range of digital / computerized tensile testing machine is offered as semi-digital, fully digital and as per the citations of our clients. These are used to perform tests such as flexural and compression test by adjusting the grip accordingly. along with research activities, following are some of the materials which can be tested on by our digital tensile testing machine: • composites and rigid plastics • low force materials • paper • films • rubber • textiles

• Total Carbohydrate: 1 Year
• Range: 200 kg with 0.1 kg least count digital display.
• Elongations: Up to 900 mm X 0.1 mm least count digital display.
• Speed: 50 mm/min to 500mm/min
• Motor: 1 HP, 1425 rpm, 220V AC, Single Phase Induction Motor.
• Power Required: 220V AC, 1500 W, And Single Phase.

Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as zip, rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.   The “ASIAN”Tensile Testing Machine provides a relatively inexpensive way for determining the tensile strength and elongation of variety of raw materials. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of motor, gear box and screw arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. There is a socket in the indicator which is connected to the PC. The load directly indicated in kilograms or Newton.   We provide the Window based software which give the different measurement parameter and the graph between load vs elongation. The report can be printed by using proper printer.   The elongation of the test specimen is measured on a digital indicator fixed on the frame of the test, which indicates the distance between the grips.   The variable speed model speed is vary by a knob fixed on the panel and the speed also digitally indicated on the control panel of the instrument or by simply types the speed on the monitor of the computer.   Various built in safety arrangements such as over travel protection, are provided.   The tester is finished in painting, powder coating and bright chrome/zinc plating to give the apparatus a corrosion resistant finish. It is supplied compiled which electrical. Which include micro-, switches. Push buttons and contactors for safe and convenient operation.   A variety of grips suitable for holding different materials are offered as optional accessories.

• Application: Laboratory
• Material: Mild Steel
• Country of Origin: 220V-440V
• Display Type: Computerized & Digital
• Brand: SRI
• Operating Mode: Automatic

• Size: 20 METERS
• Brand Name: K J ENTERPRISE
• Certification: I.S
• Application: HORIZONTAL TENSILE TEST FOR LIFTING BELTS, WIRE ROPES, METAL, PLASTICS, NYLONE
• Capacity: 100 TONES
• Power: 3 PHASE 440 VOLTS AC
• VERDE AND SIEMENS GRAY: 4500000

general description: computerized horizontal tensile testing machine with load capacity 60ton and length 20meter lings, cables etc testing facility is required as per indian and international standard with complete erection commissioning by the supply shall be on since 1999 computerised horizontal tensile testing machine 10 to 100 ton ( model kje htm ) page-6 of 8 turnkey basis. The specification features required as described below: .
description specification

maximum load testing capacity : 10 to 100ton measuring range-20kg to 10000kgs
distance between heads : 3 to 40 feet range of testing length – customized
adjustable steps : the cross head to be adjusted to the step of 250mm or more but less than 500mm
control panel : touch panel and computerised
bed clearance : 350 to 600mm – customized
ram stroke : 500 mm to 1200 mm – customized load accuracy +
0.5% to 1% of load
displacement accuracy : 0.1 to 0.5 mm
software : ms windows based
for test programming, evolution and logging using a windows user interface combined with pc
cooling system : water cooled -depends upon capacity required
calibration : nabl accredited lab
‘u’ clamps/grips/pins : as required to hold the various types of slings ,belts,products as per customers requirnment.

• Material: Metal
• Usage/Application: Industrial
• Type Of Testing Machines: Tensile Testing Machine
• Display Type: Analog
• Grade: Automatic

• Number Of Flower: Motorized
• Country of Origin: 440V
• Automatic Grade: Automatic
• Power: 3-5kw
• Application: Testing
• Dispaly: Digital

We are offering Three Types of Models Model: ME-TNE-SD: Double Ball Screw with Servo Motor Servo Drive Model: ME-TNE-DD: Acme Threaded Double Screw with AC Motor Drive Model ME-TNE: Single Screw with Induction Motor   Machine Features Fully Computer Controlled Mechanism Advanced Software is compatible with Latest Windows Version. Variable Speed Drive Options available with DC / AC Servo Drive Advanced Digital Control Panel automatically identify Load Cell Capacity Various Clamping / Gripping options available as per specific Text requirement. Overload / Overtravel Safety guard installed Advanced Digital Control System with Digital Display of Load, Deflation & Extension Machine Operations like Test Speed, Direction are controlled from the Advanced Digital Control Panel.   Manual Operation (Panel Control Mode) Sealed membrane keyboard with numeric keypad • Pre Determined Test Data • Load/Force Tare & Reset Deflection / Extension Buttons • Load / Force vs Deflection Graph is available on Dot-matrix Printer • Auto Scaling for Graph Plotting • Selection of Stop / Return of crosshead and direction • Results include Ultimate Load, Maximum Deflection, Ultimate Tensile Strength & Percentage Elongation   Computerized Operation (Software Control Mode) Advanced Digital Control Panel is connected to the computer through RS – 232 port & Latest Windows-based Advanced Software. The control is transferred to computers and with the help of Windows-based Software, complete testing can be performed.   Software Features Supports Windows XP / 7 / 10 User-friendly Windows Software for complete test control Real-Time Graph with an online display of Load / Force, Deflection & Extension Wide range of input test data Unit interchangeability for input data and output results as per Standard Extensive Graphics, Curve Fitting, Zooming Results include Ultimate Load, Ultimate Tensile Strength, Maximum Deflection.  %Elongation, Area Under the Curve, % Reduction in Area, Yield Load, Yield Strength, Proof Load, Proof Stress Multi Graphs are available Load vs Deflection, Stress vs Strain, Load vs Elongation.   Extensometer MECHATRONIC ENGINEERS’ digital extensometer Model ME-EE-2 is a Strain Gauge type digital extensometer to measure material’ extension while conduction Tensile Test with a resolution of one micron (0.001 mm).  It is designed to be clamped directly on the test specimen.  This is used to measure strain up to elastic limits to determine important parameters like 0.1% to 1% proof stress and young’s modulus.  ME-EE-2 has two fixed gauge lengths of 25 mm & 50 mm.  Change of gauge length is by means of replacing button knife-edge extender.  ME-EE-2 is manufactured from high strength lightweight aluminum with a durable anodized finish.  The knife – edges are made from oil hardened tool steel to withstand heavy, usage.  It Supports a maximum Diameter / Thickness of 40 mm & a maximum extension of 2 mm suitable for Round, Flat, Pipe & Tor Steel / TMT Steel applications.   MECHATRONIC ENGINEERS’ digital Long Travel Extensometer Model ME-LT- 600 is a balanced clip-on type extensometer used to measure strain accurately.  In association with the Advanced Digital Control Panel, the true extension of the sample with a 0.01 mm resolution is directly displayed.  The distance between two small clamps attached to the sample can be pre-set to any desired gauge length.  Cords attached to each clamp transmit the movement to two sensors mounted at the top of the extensometer column.  These produce pulses which drive the digital strain display thus detecting strain accurately.  This is suitable for rubber & semi-rigid plastics.  The maximum extension is 600 mm & gauge length continuously variable.   Optional Accessories Digital Extensometer Model ME-EE-2 Digital Long Travel Extensometer Model ME-LT- 600 Vice Type Grips Bending Fixture Special Grips as per requirement Shear Test Attachment Additional Load Cells (50N, 100N, 250N, 500N, 1kN, 2.5kN, 5kN, 10kN, 25kN, 5

Our team members are well aware about the payment procedures and they ensure that the clients are completely satisfied with the transactions made. We accept payment through all offline and online mediums. Buy from us the extensive array of Tensile Testing Machine; we are counted amidst the leading Suppliers in the sphere.   Typical applications are: Tensile strength and elongation at break of medical tubing, bandages, dressings and tapes Joint strength of IV connector fittings Suture-to-needle crimp pull out test Tensile strength of suture material and knotting Joint strength and material elongation of respiratory masks Elongation and tensile strength of examination gloves Mechanical strength of orthopaedic implant components