Track Rollers Dealers

We use the highest quality of raw material to provide a longer life-cycle.   We carefully manufacture the track roller considering them to endure heavy wear and tear during operations.   Low maintenance cost and extended life.

Track rollers are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc. The outer ring running surface is crowned as standard. With the exception of single row cam rollers, track rollers are also available with a cylindrical (flat) outer ring running surface. SKF supplies track rollers greased, sealed and ready-to-mount. They are available in many different types and designs and for a wide variety of operating conditions and applications. The assortment includes: Single row cam rollers Double row cam rollers Support roller with flange rings Cam followers with concentric seat

It consists of two rectangular steel tubing frames. One is stationary, the other is movable. it is supported in a nyalguide sliding block and arcuate bar system, and has ab idler roller at either end. The web can be fed over the Tracking Roller Assemblies in A ‘U’ shaped path, reversing its direction of travel, or through the Tracking Roller Assemblies in a ‘Z’ configuration, maintaining the same direction of travel. It is insensitive to attitude and can even be mounted upside down. Solidly supported on all four corners by nylaguide bearings, it is not subject to deflections caused by cantilever stresses. Radial bearings are sealed, and linear bearings are self – cleaning and self – lubrication. The unit therefore requires no maintenance.

We have automated warehousing system to keep pace with the latest trends and to meet the clients' requirements. Our professionals make certain that the products are kept safely. We are counted among distinguished suppliers of PC 200 Track Roller catering to buyers across diverse markets. Features High grade metal QC tested & long lasting Dimensionally stable

Yoke type track rollersYoke type track rollers are single or double row units fitted on studs. They comprise thick-walled outer rings with a profiled outside surface and needle roller and cage assemblies or full complement sets of cylindrical or needle rollers. Yoke type track rollers can support high radial loads and axial loads arising from misalignments and skewed running and are suitable for cam drives, slideways, conveying equipment etc. The bearings are available with or without an inner ring as well as in open and sealed versions.   Stud type track rollersStud type track rollers comprise thick-walled outer rings with a profiled outside surface, solid roller studs with a locating thread, thrust washers and needel roller and cage assemblies or single or double row full complement sets of cylindrical or needle rollers. They can support high radial loads and axial loads arising from misalignments and skewed running and are suitable for cam drives, slideways, conveying equipment etc. The bearings are available in several designs and with or without an eccentric.

Maloo Spares Syndicate offers track rollers. The company is authorised dealers for Berco Products in India. Berco Italy is one of the best manufacturers of undercarriage spares in the world. Rest assured using Berco undercarriage will reduce the machine down time and overall operating costs to minimum with maximum product life. It can also supply track rollers in imported/branded make for various machines like bulldozers, excavators, etc. Maloo Spares Syndicate was founded in 1984 as a small time trading firm has evolved itself into a major supplier, trader, distributor and importer of spares for filters, under carriage parts, engine and fuel pump spares, O rings and seal kits, ground engaging tools, bushings and pins, etc. It also has a branch office at Sanpada, Navi Mumbai which exclusively deals in spares for excavators, thereby catering the need of Navi Mumbai customers.

We are the leading dealers, Importers and Stockists of Track Roller, Idler Assy, Track Link, Track Shoe Plate, Track Pin and Bush, Sprocket, Track Shoe Bolt Nuts and Track Guard parts for Tata Hitachi, L&T Komatsu, BEML Dozer, Caterpillar, Poclain, etc.   

We are importing and representing KTSU Japan for these product in India, Apart from prescribed quality standards, KTSU Japan Rollers are FRICTION WELDED, a salient feature available only to state of art technology plant, and that too a very few in world.

Track rollers are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc. The outer ring running surface is crowned as standard. With the exception of single row cam rollers, track rollers are also available with a cylindrical (flat) outer ring running surface. SKF supplies track rollers greased, sealed and ready-to-mount. They are available in many different types and designs and for a wide variety of operating conditions and applications. The assortment includes:

Our track rollers form an integral part of the track system for a wide range of brands available in the market. We ensure the highest quality of manufacturing to provide a longer lifecycle to the rollers considering the extreme working conditions they undergo   The track rollers are mounted at the bottom of the track frame. Each earth moving equipment is built heavy and hence the rollers are bound to carry the majority of the weight of the machine during operations. They are also expected to endure heavy wear and tear during multiple operations, including the roller friction and shock loads. This also creates heat in the interiors of the rollers as well as surface to add to the wear.   ​Features​​ ​ The raw material selected for the machining of the rollers of high quality and then machined to precision. We also consider a higher factor in machining to achieve the exact dimensions to suit the application.  ​ The material selected is 40mnB which is high-quality steel. This component undergoes quenching, induction hardening and tempering to reach surface hardness of about 50-55HRC and a hardening depth of 4.5mm ​ All irregularities from the surface are machined out to have an even surface of operation.  ​ The roller shafts are smoothly polished to reduce surface friction. This improves the life of the rollers by about 20-30%. The surface roughness is kept lower than the industry standard average of about Ra 0.8-1.6 to provide an extended lifecycle.  ​ The roller seals are provided with 3% of Mo (Molybdenum). The standard lifecycle of these seals is also higher by about 20-30% more than the standard ones available in the market. 

We are named as one of the topmost Vehicle Track Rollers Manufacturer from India. We present superior quality Heavy Duty Track Rollers that are used in large number of automobile industries. Track Rollers are appreciated for their unmatched performance and high performance. These track rollers are used in all kinds of European, American & Japanese Vehicles and can be availed in customized specifications.