Universal Joints Dealers

Universal expansion joints can absorb movements in several planes.     Standard range Standard dimension: DN 50 - 6000 Design pressure: PN 6 Customized solutions: All designs, all sizes and all materials \     Accessories Universal expansion joints are available with: Inner sleeves Cover Tie rods

The universal pipe expansion joint consists of two bellows separated by a pipe section or spool. The primary purpose of this arrangement is to have a unit which will accept large amounts of lateral deflection. The amount of lateral deflection they can accept is a function of the amount of angulation each bellows can absorb and the distance between the bellows. For a given bellows element, the amount of lateral deflection capability can be increased or decreased by simply changing the length of the center spool. Since deflections are usually the result of piping thermal expansion, and universal expansion joints are usually long, the thermal expansion of the entire unit's length is accepted as compression by the two bellows elements. In this way, the overall length of the unit does not change when the piping is heated. Features • Absorbs large amounts of lateral deflection • Unit length does not change with heat • Eliminates pressure thrust load • Tie rods not required Instalation The necessary steps for installing all pipe expansion joints shall be pre-planned. The installers shall be made aware of these steps as well as the installation instructions furnished by the manufacturer. The most critical phases of the pipe expansion joint installation are as follows. • Care shall be exercised to prevent any damage to the thin bellows section, such as dents, scores, arc strikes and weld spatter. • No movement of the pipe expansion joint (compression, extension, offset, rotation and especially torsion) due to piping misalignment, for example, shall be imposed which has not been anticipated and designed into the movement capability of the pipe expansion joint. If such movements are imposed, they can result in system malfunction, damage to the bellows or other components in the system. Specifically, cycle life can be substantially reduced, forces imposed on adjacent equipment may exceed their design limits, internal sleeve clearances may be adversely affected

We make available high grade Universal Joints which are manufactured using stainless steel. Our product is obtainable in risk-free and industrial grade packing material that make sure the goods are protected from damage and are delivered to buyers in unharmed conditions. Our company is well versed with online as well as traditional payment methods. As per requirements of patrons, we can sign an agreement for payment with suitable terms and conditions.

Product Specification A universal joint is a joint or coupling in a rigid rod that allows the rod to 'bend' in any direction, and is commonly used in shafts that transmit rotary motion. It consists of a pair of hinges located close together, oriented at 90° to each other, connected by a cross shaft.

Universal joints are used to transmit torque from one shaft to another which are offset to each other. It is an ideal form of coupling two shafts when offset is unavoidable. Universal joints are made from heat treated alloy steels for increased over load and reliability. Precision machining ensures optimum performance under severe load conditions.

Universal expansion joint bellows manufactured using stainless steel as an expansion joint material. we design bellows which gives flexible joints. The universal pipe expansion joint consists of two flexible bellows separated by a pipe joint section or spool. The primary purpose of this arrangement is to have a unit which will accept large amounts of lateral deflection. The amount of lateral deflection they can accept is a function of a number of angulations each bellows can absorb and the distance between the bellows. For a given bellows element, the amount of lateral deflection capability can be increased or decreased by simply changing the length of the centre spool. Since deflections are usually the result of the piping thermal expansion, and universal expansion joints bellows are usually long, our units are designed so that the thermal expansion of the entire unit length is accepted as compression by the two bellows elements. In this way, the overall length of the unit does not change when the piping is heated. The standard units mentioned in brochure have all been designed to accept the thermal expansion of their length when the high temperature is up to the design temperature shown. APPLICATIONS:   Industrial piping systems

ROTAR Universal Joints have proven their capacity to work very efficiently under Indian conditions. ROTAR brand of Universal Joints are increasingly used by all segments of industries proving their superiority over other brands available. These joints are machined on specially designed mass production machines which offer consistent quality & high production – thus ensuring timely deliveries.

Ideal loading across entire bearing length due to balanced deflection between yokes and cross. Replaceable inner bearing race on size and large significantly reducing cross maintenance expenses. Eliminates unnecessary bolted connections and serrations in yokes, One piece yoke split yoke and bearing housing construction.

The universal pipe expansion joint consists of two bellows separated by a pipe section or spool. The primary purpose of this arrangement is to have a unit which will accept large amounts of lateral deflection. The amount of lateral deflection they can accept is a function of the amount of angulation each bellows can absorb and the distance between the bellows. For a given bellows element, the amount of lateral deflection capability can be increased or decreased by simply changing the length of the center spool. Since deflections are usually the result of piping thermal expansion, and universal expansion joints are usually long, the thermal expansion of the entire unit's length is accepted as compression by the two bellows elements. In this way, the overall length of the unit does not change when the piping is heated.

We are offering Ball Type Universal Joint. We deal in an array of flexible universal joint which is precision engineered at manufacturer’s end to perform under extreme conditions. These are available in various sizes & shapes thus suiting the needs of every industry. They have speed up to 4000 rpm, with 4 needle bearings to transmit the torque, filled with grease, for life.

Hardy Transmission (P) Ltd offer an impeccable range of TRANSCO Universal Joint Couplings, with the aid of our cutting edge technology. our range of universal joint couplings is available with or without finish bore as per customer requirement. TRANSCO universal joints have been fostered from the accumulated technology developed in fully equipped research facilities together with vast experience and actual results. They possess high strength and precision, and have characteristics of high functionality and reliability. These products support all types of applications including steel mills, diesel rolling stock, paper machines and marine vessels. At Hardy Transmission (P) Ltd We can provide universal joints from 1 inch to upwards of 8 inches. We have the capability to custom design and manufacture specialized universal joints and driveshafts, and their connections to your requirements. Universal joints are used to connect shafts together to transmit power from an end to the other. In particular, universal joints enable the transmission of motive power when two rotating shafts are separately located or angled. Universal Joints are joints/couplings in a rigid rod that allows the rod to bend in any direction; these are commonly used in shafts that transmit rotary motion, most commonly automotive drive shafts. Universal joint are used to transmit torque from one shaft to another which are offset to each other. It is an ideal form of coupling two shafts when offset is unavoidable.Universal joint are made from heat treated alloy steels for increased over load and reliability. Precision machining ensures optimum performance under severe load conditions. The manufacturing raw material of this product is highly being extracted from the pure natural vendors. The use of sophisticated technology is the most prominent factor for the fabrication of this product. These are available in 8 inch od up to 4 inch shaft size and can be availed in finished or without finished look with in best valuable market prices.       A flawlessly designed range of Universal Joints can be obtained from us at economical prices. These are specially created from alloy steel with heat treated working parts. Moreover, these can be availed with or without finish bore, as per the desire of the customers. Apart from this, these couplings are highly favored for their high tolerance, durability and corrosion resistance.