USB Programmers Dealers

The SF600 is a high speed "in System Programming" programmer to update the SPI Flash soldered on board (In Circuit Programming) or in the socket adaptor (Off line programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering friendly interface and powerful features to users.

Through the JTAG mouth MCU software and hardware of the simulation, also by the mouth of single-chip processor JTAG download a program or modify a molten silk. The support of the single chip microcomputer simulation models: ATMega16, ATmega16L, ATMega162, ATmega162V, ATmega165, ATmega165V, ATMega169, ATmega169V, ATMega32, ATMega323, ATmega323L, ATmega32L, ATMega64, ATmega64L, ATMega128, ATmega128L, AT90CAN128ATMega16, ATmega16L, ATMega162, ATmega162V, ATmega165, ATmega165V, ATMega169, ATmega169V, ATMega32, ATMega323, ATmega323L, ATmega32L, ATMega64, ATmega64L, ATMega128, ATmega128L, AT90CAN128. Support JTAG simulation method, JTAG program mode, the standard JTAG interface (with ATMEL original). Our production of original version simplified products, with two 74 HC125 as a buffer drive, effectively protect the chip program not be developed, the save unnecessary trouble; Cluster cost-effective products. FEATURES Compatible with AVR JTAG USB emulator device. AVR Studio firmware upgradeable, the Update-JTAG manual will allow the device update to most current firmware and support the device list on latest AVR studio development software USB data transfer speed up the update rate and debug performance. Compatible with AVRISP programmer. Same device support and updateable by AVR Studio 3 LEDs for debugger Status.

USB 8051 PROGRAMMER is self Powered programmer. No Need of external Power supply. Power LED Indicator and Status LED Indicator. User Friendly GUI and Software. Kit Includes USB Cable , CD and programmer.

Support for AVRDude from version 5.2 onwards Allows you to to read or write the microcontroller EEPROM, firmware, fuse bits and lock bits Support for Linux, Mac OS X and Windows (will work on vista) 5 KB/sec maximum write speed Software controlled SCK option to support targets with low clock speed (< 1.5MHz) 10 pin ISP interface These programmers are a perfect companion to the Protostack 28 pin AVR Development Board or the Protostack ATMEGA8 Development Kit.

We are engrossed in the manufacturing and supplying the best quality USB Flash Programmer, which is fabricated under the supervision of professionals. Known for its vivid software simulation and long lasting life, the whole range of USB Flash Programmer is highly regarded among the clients. It requires no external power since it is powered from the USB port itself. Our USB Flash Programmer is high on performance and speed.   Key Features : 6 pin ISCP connector for Target Board Connection. Dimensions : 2x4x2 in cms. Mini USB Connector for PC interface

AVR USB Programmer is a low cost STK500V2 compatible In-System Programmer (ISP). It is supported in all operating systems including Windows 2000, XP, Vista, Windows 7, windows 8 & windows 10.

We offer USBasp, a versatile USB based ISP Programmer For Atmel AVRs USBasp AVR In System Programmer (ISP) hardware from Laktronics is based on the combined USBasp firmware design by Thomas Fischl and OBJECTIVE DEVELOPMENT GmbH, and is supplied by us as per the terms and conditions of the GNU GPL Version 2. USBasp is a USB In System Programmer for Atmel AVR controllers. The original design is built around an Atmega8 or an Atmega88 and a couple of passive components. Our model of USBasp is built around an Atmega8. The programmer uses a firmware-only USB driver, no special USB controller is needed, resulting in lowest hardware cost. There are different choices available for drivers and application software. Being an open source design, the customer is free to choose any device driver or application package to suite his requirements or system environment. Even the firmware supplied with USBasp can be replaced by another new firmware, if required, to get the latest features available. Our product has added advantage of electronic protection of the Computer USB supply as well as the ISP signal lines of the programmer. For more details of USBasp hardware supplied by us and the terms and conditions of GNU GPL Version 2, please refer to our site :

The AVRISP is a professional low cost In-System Programmer covering all AVR 8-bit RISC Micro Controllers. The programmer connects to a PC through a standard USB and draws the necessary power from the PC USB port eliminating the need for an additional power supply. It can also power your target board up to 100ma from USB. AVR Studio is used as front-end software, giving you a highly integrated development solution. The AVR ISP is fully supported by AVR Studio,WINAVR,AVRISP. Programmer also supports AT89S51 and AT89S52 ICs along with all other AVR ICs Features AVR Studio Interface ISP Programming of all AVR Devices Programs both Flash and EEPROM Supports Fuses and Lock Bit Programming Supports RC Oscillator Calibration Upgradeable to Support Future Devices by upgrading AVR studio software Operates at Target Voltages from 2.7V to 5.5V Adjustable Speed. Supports all Target Boards Running at Speeds Higher than 8kHz USB Interface to PC for Programming and Control Takes Power from USB. No need for Additional Power Supply Can power target boards upto 100ma

USB in-circuit programmer for Atmel AVR 89Sxx controllers   The Keil ULINK2 Debug Adapter connects your PC's USB port to your target system (via JTAG, SWD, or OCDS) and allows you to program and debug embedded programs on target hardware. Software used on PC will be Keil-MDK. The hardware is firmware upgradable 100% through Keil IDE itself.        

805152 Devices by Atmel, SST and Winbond. MegaAVR and TinyAVR devices by Atmel and Serial EEPROM by ST Microelectronics and Microchip.