UV Cure Adhesive Dealers (10 products available)

We have made a landmark in offering the best quality UV Cure Adhesives to the national and international clients. Used to cure exposure of high intensity UV rays, these UV Cure Adhesives form strong structural bonds. The company lays great stress on maintaining the quality of the UV Cure Adhesives, thereby we carry out strict quality checks regularly. Moreover, these UV Cure Adhesives can be availed from us at the reasonable prices. Benefits : Reduced tooling and capital costs Higher production rates Lower set-up costs Ideal For : Glass to glass/ metals Wood Mirrors Different plastics in different combinations

Form : Adhesive Kit

Brand Name : Mothers International

Product Type : Orthobond Light Cure Orthodontic Adhesive Kit

Technique : N/A

Feature : Bonding for metal and ceramic bracket.

Brand Name : Ormco

Package Contain : 1 Syringe + 1 bond

Usage : Dentist Use

Instrument classification : Class I

Supply Ability : 10 Piece/Pieces per Week

Enlight Bonding SystemHighly filled light-cure adhesive. Bis-GMA resin for superb handling characteristics, easy cleaning. Highly active initiater system supports reduced cure times.Tooth preparation Place the lip/cheek retractor and saliva ejector in the mouth. prphy the teeth thoroughly with pumice and water. Rinse with water while using a high speed evacuation system. Dry the teeth with air syringe. Apply the etchant solution to the bonding surfaces with applicator sponges. Gently dab the etching solution : do no rub. A continuous dabbing of fresh solution for 30 secdonds is most effective. Rinse thoroughly with a forcefull air-water spray and suction using high speed evacuator. Maintain a dry field. Do no allowthe patient to rinse or permit contact of the etched enamel with saliva or mucosal tissue. Dry the etched enamel with clean, dry air, The etched enamel must now have a uniform, dull frostly appearance. Bonding Procedure Dispense a small amount of sealant on the mixing pad. apply ortho solo sealant to teeth using the brushes provided. A thin, uniform coating should extent from the gingival crest and vover all of the etched enamel. Replance the cap immediately after dispensing sealant. Extrude a small amount of  enlight adhesive paste into the base of the bracket pad. After application, clean the tip and replace cap. Place the bracket onto the tooth surface immediately after applijng adhesive.\ Adjust the bracket to its final position and press firmly. Remove the excess adhesive from the periphery of the brackets base. With Demetron's optilux 501,  Expose the adhesive for 10 second for metal brackets, and 5 second for ceramic brackets. shining the light directly through the bracket bonds ceramic brackets. Divide the curing time and shine the light on the mesial and distal edges of the brackets to bond metal brackets. Active archwires may be placed immediately after curring the last bracket. Shelf life and storage Do not expose materials to intense light or elevated temperatures. Enlight should be used at ambient temperature. Caution : Etching Solution :Contains 37% phosphoric acid solution. Avoid contact with skin, eyes, and soft tissue. In case of contact with skin or eyes, flush immediately with water, get medical attention for eyes. Do not take internally. Sealant and paste : Avoid prolonged or repeated contact with oral tissues and skin. wash skin with soap and water after contact. uncured materials may cause contact dermatitis. if skin irritation occurs, discontinues use. Use in a well ventilated area. Keep containers closed when not in use.

Color: : White

Packaging: : 290ml

Super Fast SMX Hybrid Polymers     Fix ALL Turbo is a high quality, neutral, elastic, one-component adhesive-sealant with very fast strength build-up based on SMX-polymer. Fix ALL Turbo is a KOMO-certified construction adhesive based on BRL3107.       Applications:   • Bonding in building and metal industry. • Elastic bonding of objects, panels, profiles and other pieces on the most common substrates. • Sealing and bonding in the building and construction industry. Characteristics:   • Quickly manipulable and very fast build-up of strength with thin adhesive layer and on porous    substrates. • Very high final strength. • Good extrudability. • Good adhesion to most common substrates, even on slightly wet substrates. • Permanent elastic after curing. • Can be painted with water based systems. • Good colour stability, weather and UV resistance.  

UV cure adhesive in seconds allowing for immediate parts assembly and inspection, reducing work-in-progress and increasing manufacturing productivity.

Safety division (OHESD) is at the forefront of technological evolution in the safety and personal protection industry world wide. Product Spectrum 1) Maintenance free respirators 2) Disposal earplugs 3) Ear wears

Surface of Application : Metal

Grade Standard : Industrial Grade

Brand Name : Loxeal

Curing Time : 6-55/Seconds

Perma Super CladexAMBIENT CURE EPOXY ADHESIVE KIT FOR VERTICAL CLADDING OF MARBLE, GRANITE & DECORATIVE STONESDESCRIPTIONPerma Super Cladex is a two component, fast setting, high strength epoxy adhesive system. Perma Super Cladex is used for fixing stones, granites, marble, tile and any such claddings material on to the vertical surfaces. Perma Super Cladex helps in holding the bonded surfaces through various climatic temperatures and various water and chemical exposures.PRIMARY USESPerma Super Cladex is ideal for bonding granite, marble, tiles, stones and any such decorative cladding material to the concrete or stone wall surface. This product achieves a strong bond between the surfaces within minutes, reducing the support time need before bonding. Used as a bonding agent between two segments of bridge girders, when properly applied on both surfaces.ADVANTAGES High strength. Durable. Resistance to water and chemical attack. Solvent less Epoxy System Supplied in Pre-Weighed units Hardens quickly DIRECTIONS FOR USEPreparation: All surfaces must be thoroughly cleaned and prepared. All loose particles, laitence, dust, curing compounds, oil, grease, fat, bitumen and paint must be removed if good bond strength is to be achieved.Gloss surfaces must be abraded. If oil or grease are present, scrub surface with hot detergent water and rinse thoroughly. Where the concrete surface is badly disintegrating, the degraded areas should be removed by chipping, grit blasting, or scabbling until a sound base is obtained.Remove loose par ticles and prepare as above.All laitence that has not been worn away should be removed by mechanical scarification, sandblasting, or by acid etching. Visible signs of mould growth, lichen or algae, should be removed and treated with a fungicidal wash. New concrete should have cured until the shrinkage and moisture movement is low. Surfaces heavily impregnated with mould oil should be degreased and sandblasted or mechanically scarified to remove the contaminated surface. All curing compound should have disintegrated or be removed and application carried out only over clean, dust free surface.                                  MIXINGCarefully transfer the entire contents of the Reactor Component to Base Component and mix thoroughly, using a stout, palette knife or a slow running drill with a paint mixing paddle until uniformity is achieved. This normally takes 2-3 minutes.GUIDE TO APPLICATIONApply the well mixed Perma Super Cladex on the back of the granite, marble, or the tile to be cladded in sufficient spots to ensure good bonding. Press the cladding material against the surface to be cladded and support it for a few minutes till the Perma Super Cladex holds the surface together.PACKINGPerma Super Cladex is available in 200 gms, 500 gms and 1Kg pack & 2 kg pack of equal quantities of Base & ReactorSHELF LIFEPerma Super Cladex has a shelf life of 12 Months from the date of manufacturing.DISCLAIMER PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks. The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose. PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results. The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.

Type : Heat Resistant

Surface of Application : Glass

Grade Standard : Industrial Grade

Brand Name : Hi Bond

Material : Acrylic

Volume : 10 to 30 ml

Uv cure adhesive, packaging adhesives, film adhesives