Variable Auto Transformer / Variac / Dimmerstat Dealers

Magtel has very strong manufacturing facilities with well equipped machines & test instruments such as winding machines (CNC-programmable & manual), Electric Oven, Conveyer Oven, Varnish chamber, Air compressor, Power generator, Automatic transformer tester using fixtures, Power source, Power analyzer, Load bank, DVDF etc. Special Features of Magtel Magtel has a winding manufacturing facility ranging from 6mm toroid size to 120kVA transformer size (which includes ferrites and lamination version)! Magtel designs & accepts custom built design transformers which are Aluminum wirestrip based! Magtel has Toroid winding machine facilities and has successfully exported many chokes that are toroid based!

We are the manufacturer and supplier of Variable Voltage Auto Transformer which is a technologically advanced device supplies 0 to 270 volts voltage in single phase and 0 to 470 in three phases. Our transformers deliver continuous voltage without any fluctuation. This output is accomplished through turning the knob in less than a full circular rotation. unit range single phase unitthree phase unit availability enclosed motor driven open ministat soil cooled technical specifications capacity : 2amps, 4amps, 8amps, 10amps, 15amps, 28amps, 40amps, 50amps, 60amps, 100amps, 150amps and 200amps. salient features compact in sizeanti-corrosive resistant to heat withst and operational temperatureeconomical ideal for getting variable dc voltage for electroplating setsvarying the speed of dc motorsmanufacture of voltage stabilizer up to 600 k varegulate and control the temperature of furnaces and ovens developing high capacity floating rectifiers for telephone exchanges fabricating h.v. Test sets, meter test benches, oil test sets, etc.

We are the leading manufacturer of a wide range of All Plastic Parts of Auto Variable Transformer(Dimmer). We are offering Plate Bush, Wiper Bush, 5 type of Gear, Mo Patti, Mo Dandi, Mo Keim, Microswich Stand, Mechenical Lock, Ms Plate Bush, Cable Soket and more. We are using best quality Naylon-6 which is best result for this specification and fulfill the requirements of the clients. Our rates are most competitive in market with great quality.

The dimming control of Inverter-cum-Dimmer and another system (DC-DC dimmer-stat) is done using potentiometers. The Lighting Control Panel (LCP) has two built-in DC-AC inverting modules and it also provides two dual dual-concentric pots so that it does not look crowded, and it is easy for the aircraft pilot to operate zone-wise control of the lighting systems in the cockpit.

‘M/s ARDISONS ASSOCIATES’, is a leading Variable Autotransformer manufacturer and supplier based in Punjab. We manufacture and supply world class variable auto transformer which has a movable carbon sliding on a silver plated commutator by either manual or by motor, give an output voltage from zero. The variable auto transformer provided by us confirms to IS/5142/69, IS/5142/69 standards. Features :- Rugged constructionHigh efficiencyExcellent regulationLow magnetizing currentNo wave form distortionLoad capacity Smooth and linear out putSilver plated commutatorLow operating torqueCarbon depositionsDouble wound auto

Specifications: input: 240v-270arn range: 4amp-100amp features: long working lifern precisely designedrn work on large current also additional information: item code: 100a.

We are well-known in this industry as a reputed manufacturer and supplier of a quality assured range of Auto Variable Transformer . These are manufactured under the firm observation of our skilled quality inspectors using the best quality components procured from the reliable vendors of the market. The offered transformer is manufactured using top-notch quality components under the surveillance of our experienced professionals by keeping in mind industrial quality standards.

The basic Auto Transformer is meant for operation off a nominal voltage of 240 V A.C & can give output voltage anywhere between 0 – 240 V or up to 270 V, by a simple transformer action. Three such Variable Auto transformer when connected electrically in star & mechanically in tandem, became suitable for operations of 415 V 3 Phase A.C. supply & to give output of 0 – 415 V or up to 470 V.

Engaged as a manufacturer & supplier we are providing our customers with Variable Auto Transformer. Manufactured using single layer winding on a core that is made up of high-grade cold rolled grain oriented steel, these products are developed with perfection. Rugged in construction, these products are provided to our customers in different specifications to suit their demands. Some of the salients features of"COSMO" Autotransformers are. » Continuously Varable output voltage » Silver plated track of carbon brush » High grade carbon brush » Easy replacement of carbon brush » Extremely low magnetising current (about 25 of rated load) » Mechanically rugged design » Almost no maintenance required » Capacities upto 40 amps in air cooled version » conforming to IS:5142-1969

Automation Electric Company is leading manufacturer of Custom made variac. This product is manufactured by utilizing fine quality material and advanced technology to meet industry needs. These custom made variac is designed as per user requirement with Input-Output function. Offered products are used in various applications. It can be tailored as per customer design. We offer this Custom made variac at a very nominal rate to our customers. Key Features Easy installation High quality Rugged construction Less maintenance cost Noise free operation Cost effective

Listed amidst the renowned Suppliers of Variable Autotransformer, we successfully deliver the finest range of products the clients. The wide assortments of products we offer are strictly as per the globally accepted norms.

Power Line Systems Pvt. Ltd. offers two types of Variac, Open Variac and Covered Variac. These are used in Industries. Available in RangeCapacity: 2AMP to 600AMP.

Variacs or variable auto transformer is a Continuously variable voltage transformer, having a single layer winding on a toroidal core of high grade Steel. In an autotransformer portions of the same winding act as both the primary and secondary winding. the winding has at least three taps where electrical connections are made. One end of the winding is usually connected in common to both the voltage source and the electrical load. The other end of the source and load are connected to taps along the winding. Different taps on the winding correspond to different voltages, measured from the common end.

Three Phase Variac Excellent Regulation, No Wave Form Distortion, Low Operating Torque, Smooth & Linear Output, Low Magetizing Current. Negligible Maintenance.

The basic Spectron Continuously Variable Voltage Auto Transformer is meant for operation of a nominal voltage of 240V AC and can give output voltage anywhere between 0 tp 240V, or upto V by a simple transformer action. Three such Spectron Continuously Variable Voltage Auto Transformer when connected electrically in star, and mechanically in tandem, become suitable for operation off 415V 3 Phase AC supply and to give output from 0 to 415 V or up to 470V.

Leading manufacturer exporter of variable auto transformer. Variable transformer is known by different names in different countries such as continuously variable voltage auto transformer, variac auto transformer, variable transformer, variac transformer, voltage regulator, dimmer etc. Product ranges 1ampere 2ampere 3ampere 4ampere 5ampere 6ampere 8ampere 10ampere 12ampere 15ampere 20ampere 25ampere 28ampere 30ampere 40ampere 60ampere 75ampere 100ampere. Products are available in single or 1 phase , three or 3 phase. Open flush panel mounting type or floor mounting. Close project enclosed types. Motorised variacs are also available.

We manufacture wide range of variable auto transformers suitable for indoor & outdoor applications with wide current range from 4a to 1000a both in air & oil cooled. Sakthi has supplied thousands of these transformers to various industries in india. Quality of sakthi transformers are well patronized with repeat orders from our customers. The plant is well equipped with most modern machinery & test equipments to conduct tests as per is: 5142 with an installed capacity of 5000 units per annum. Manufacturing range: from 2 amp to 200 amp (single coil) in air& oil cooled. Apart from this, we also manufacture dual wound variac from 500 va to 5 kva having 170v – 270v for the input range and 220v230 v output range. technical specifications particulars single phase three phase type of transformer air cooled oil cooled for indoor application transformation ratio 1:1 primary voltage as per requirement as per requirement secondary voltage as per requirement as per requirement connection in 3-phase na star star (or) delta delta ratings 0.5 kva onwards 3 kva – 500 kva

Radiotone Single Layer Roller Contact Vertical Variable Autotransformer (colloquially known as Variac) construction looks like a conventional 3 phase transformer as can be seen from the picture. Speciality of this Variable Autotransformer lies in winding Cu strip of appropriate cross section edgewise. This reduces the length of the column to 1/4 as compared to winding widthwise, thus making it compact. This column is then polished & roller carbons are made to make contact with winding for current collection. Due to circular column construction, a Double Carbon assembly can be provided giving two outputs 180 degrees out of phase (or as it is known + and - type).   Available Models :- 60A 3 Ph, 440V 60A Single Phase 100A 3 ph, 440V 100A Single Phase, 2 Phase

VARIAC is a continuous Variable AutoTransformer, having a single layer winding on a Toroidal Core( Donut-Shaped )  CRGO Stamping (  high-grade Cold Rolled Grain Oriented  steel). On one side of the copper winding, a special durable contact surface is made.  A contact holder arm  with specially selected high grade carbon brushes  slides smoothly on this surface over the winding and taps of a portion of voltage across the winding. Any desired voltage within the Maximum range can be obtained by adjusting the position of the Brush.   High grade CRGO stamping is used for making Variac Coils. Purity of copper is 99.99% used for winding the Variac coils. Very smooth & step less voltage control. Easy Installation & Connections. Temperature remains low. Virtually maintenance free High grade carbon brushes are used Wide range of current rating 4 Amp. To 1250 Amp. High Efficiency Power factor distortion & wave form is negligible. Simple rugged designing. Overloading capacity for a short time. Long functional Life assured. Spare carbon brushes provided for select ratings. Impeccable quality.   Servo Voltage Stabilizers Rectifiers Testing Instruments. Labs & Hotels Battery Chargers