Vibration Sensors Dealers

The new version uses the TCRT1000 reflective optical sensor for photoplethysmography. The use of TCRT100 simplifies the build process of the sensor part of the project as both the infrared light emitter diode and the detector are arranged side by side in a leaded package, thus blocking the surrounding ambient light, which could otherwise affect the sensor performance. We have also designed a printed circuit board for it, which carries both sensor and signal conditioning unit. And its output is a digital pulse which is synchronous with the heartbeat. The output pulse can be fed to either an ADC channel or a digital input pin of a microcontroller for further processing and retrieving the heart rate in beats per minute (BPM).

Multichannel API 670 Monitoring system to cater the Condition Monitoring needs of Heavy machinery like 210 MW, 500 MW + capacity turbines, Critical gas compressors, etc. A perfect tool for Plant-wide asset management well equiped with latest features of analysis and diagnosis.

VM-8000 is a continuous online monitoring system suitable for condition monitoring and machinery protection applications. The system measures 10-channel Non-Contact /Casing vibration. The system has dedicated 5 digit 7 segment displays for displaying vibration values. Also measured parameters will be communicated to remote terminal via MODBUS RTU on RS485. The system provides industry standard 4~20mA DC signal output for interfacing with Distributed Control System (DCS). The system has 8 programmable relays for alarm and trip. Read relay contacts provide for Alarm and trip. Each channel has tricolor LED indication for indicating OK, DANGER and ALERT status. Features: • Industry Standard 6U/24T Rack Size.• Digital Display Options. • Ten Channel Measurements.• Four Relay Output (Alarm Contact Output).• Built in power supplies necessary for sensors operation.• LEDs per channel for indicating OK/ALERT/DANGER status.• RS485 serial port with MODBUS RTU protocol..• 32 units can be connected in RS485 multi drop network.• All Settings stored in Non-Volatile memory to prevent any data loss.• Industry standard DC Power Supply +24 VDC.• Set Points for Alert Alarm Limits.• Set Points for Danger Alarm Limits.• Set Points for Alarm Time Delay.• Latching for Alert Alarm.• Latching for Danger Alarm.• Digital Communication.• Multi-function Key switch.• Highly reliable. • Easy to retrofit. • Highly economical.

Product ID: 1329 Can detect the surrounding sound then output analog value Can set a sound value then output digital value Adjustable Sensitivity , Stable Performance 5V Working Voltage , support both the output digital value and the output analog value Analog voltage signal output, signal amplitude is VCC / 2 Sensitivity, built-in amplifier circuit, gain can be adjusted Get the intensity of the sound of the voltage signal through the AD transform Port explanation : DO for digital output, AO for analog output Applicable to a variety of platforms including Arduino / AVR / ARM  

We are offering piezo disk vibration sensor. Introduction the dfrobot vibration sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration. Specification power supply:5v interface:analog

A Vibrating Screen or Feeder is usually the heart of a production plant, its failure causes loss of production and repair may be expensive if damage has already occured. The monitoring system for Vibrating Machines detect irregular vibrations which usually remain unnoticed by maintenance personnel. The system reports them early enough to trigger preventive measures and avoid extensive damage and unscheduled downtime Monitoring functions include failure of drive shafts, overspeed, transverse vibrations, overload and resonance vibrations. Use of monitoring systems increase plant availability through avoiding unscheduled breakdowns and reducing maintenance.