Wifi Module Dealers

The company is one of the renowned Importers and Suppliers of WiFi Modules in Mumbai (India). The GSX WiFi Modules are a completely TCP/IP solutions with numerous attractive features. The company offers the ultra low power WiFi Modules to the clients which are known for their power efficiency. The WiFi Modules are indeed a new class of the internet-enabled products with remarkable efficiency. Features Of WiFi Modules : Stand alone and embedded wireless 802.11 b/g networking moduleRN-131G: 802.11 b/g Ultra low power, surface mount moduleUltra low power 4uA sleep, 35mA RX and 200mA max TXOver the air firmware upgrade (FTP)Host data rate up to 4Mbps for SDIO and SPI and 921K over UARTUses only 100mW when awake and 10uW when asleep10 general purpose digital I/OSupports ad-hoc and infrastructure networkingAccepts 3.3VDC regulated or 2-3VDC batteryCan run for years on two standard AAA batteriesUART hardware interfacesSecure WiFi authentication WEP-128, WPA-PSK (TKIP), WPA2-PSKCombination of ultra low power and the ability to wake up, connect to a wireless network, send data, and return to sleep mode in less than 100 millisecondsBuilt-in networking applications & On-board TCP/IP stack contains TCP, UDP, DHCP, DNS, ARP, ICMP and FTP protocols8 analog sensor interfacesCertified product (FCC/CE/EN)Real-time clock for time-stamping, auto-sleep, and auto-wakeup modesConfiguration over UART or wireless interfaces using simple ASCII commands

We are one of the leading suppliers and traders of UART To Wi Fi Module. Our range of product-line is a complete ultra low power embedded TCPIP solution. These are manufactured using high-grade raw materials and are procured from trusted vendors and are provided after in-depth research regarding the market trends and clients demands. Following are the main functions of the product-line offered by our organization: Support for UART data serial, four baud rate options: 19200 38400 57600 115200bps. Wireless data rates support the 802.11b Standard, the maximum rate is 11Mbps. Integrate the functions of 802.11 MAC protocol Softwares. Support for the STA appliances in the Infrastructure Network. Support for the OpenWEP mode authentication. Support for the wep64wep128ccmpwpi data encryption transmission in the shared key mode Support for the automatic networking mode and manual networking mode. In the automatic networking modethe module can automatically scan the target network, and automatically connect when disconnection. In the manual networking modeoperation of connect and disconnect is touched off by orderthis supports a flexible control space. Support the network data transmission in RAWUDPTCP format. Support seven groups of the basic parameters set,and can connect to seven target networks the most. Support to Con fig. the parameters through user serial. Support to upgrade the fire-ware on line by the Internet.

Uart to Ethernet to wifi module This module is a low cost embedded UART-ETH- WIFI Module (Serial port -Ethernet- wireless network) developed by Rajguru electronics.This product is an embedded module based on the Universal serial interface network standard, built in TCP/IP protocol Stack. enabling the user serial port, Ethernet, Wireless Network (WiFi), interface between the conversions.Through the module, the traditional serial devices do not need change any configuration; data can be transmitted through the internet network. Provide a quick solution for the user's devices to transfer data via ethernet.

This WiFi module is based on ESP8266 Integrated Chip from Espressif, offering a complete WiFi networking solution. It can be used either to host the applications or to offload all WiFi networking functions from another application processor. Rich interface (GPIO, SPI, SDIO, I2C) options gives this board potential to be a standalone MCU with WiFi capability for wide range of applications.

High-speed Baud Rate : serial baud rate up to 3Mbps; have high speed in large amount of data transmission applications like WIFI printer,WIFI serial camera and WIFI high-speed data acquisition. Onekey WIFI Connection : support two fast networking ways--"SimpleLink" and "UsrLink";perfectly solve problems of complex networking operation in smart home applications. RegistryPackage Function : send registry data package immediately after TCP connection,which is convenient for server identifying and processing;registry data package supports custom ID and MAC. Baud Rate Sync : support using USR Visual Serial Software（USR-VCOM）.

  3 year warranty * Remotely operates via WiFi software from smart phone. Keypad for manual control 20x4 LCD display for status and user interaction Operates any number of Programmable LED lights #TC-MPXX Various RGB color mixing patterns or shades  Programmable dancing color lights effect Avialable in metal body with Black & Grey color shades Seperate power supply module required as per number of lights 

When getting to know and use this device, the best approach is to use a USB to 3.3V TTL converter and a 3.3v power supply. Avoid working with any devices that require or output 5V levels. Get everything working and talking first. Once you have done this then consider how to connect any 5V devices and interfaces if you must. You will need to implement level shifting to connect to 5V devices. There are plenty of resources on the internet (for example (1), (2)) that will help you do this, and also low cost modules such as by direction level shifters that are available for a few bucks, Also be aware of the difference between unbuffered interfaces (such as I2C) and buffered ones (such as SPI) as the level shifting approach is different for these. Also note that if you use an external power supply, then be sure to connect its ground to your USB TTL's ground, otherwise it may have trouble.