Water Level Controller Dealers

Features High and low voltage protection. Long lasting sensor. Addition of level indication in digital display. Digital display based on microcontroller. Suitable for any motor pump and tank. Rate of problem occurrence is very low in sensor. Overload protection. Easy to install, portable and reliable. Providing LED indication and LCD display. Null maintenance required. Advanced Embedded Technology Corrosion free level sensors

Feautures : Top Tank Level Control Bottom Tank Level Control Low Voltage Cut-Off Dry Run / Over Load Protection Dry Run Restart Timer Facility Delay On Timer Cyclic Timer 2 Line LCD Display User Programmable Current & Voltage Setting Recommended Load Upto 20A Suitable for : Self Priming Mono Block Pumps Single Phase Mono Block Pumps Single Phase Open Well Pumps Single Phase Jet Pumps Single Phase Compressor Single Phase Submersible Pump  

We are offering fully automatic water level controller. Switch on the pump when water level in overhead tank goes below the pre-decided minimum level. Switch off the pump when water level in the overhead tank reaches the pre-decided maximum level. Suitable:- contactor type panel no volt coil contact less than 3amp. Push button auto start time 2-sec. Connection terminal:- 2 - main supply, 2- no volt coil, 4 - start push button, 3-water tank.= 11-wire dimensions in (mm):- w-155, h-210, d-110.

We offer Water Level Controller that is suitable for single and three phase motor. The controllers are used in suction, multi tanks and delivery tanks. These panels are known for their features such as technologically designed structure, fixed with voltmeters and automatic operation. Our panels are offered in standard and customized options as per the requirements of our clients.

We are offering water level controller. Water level controller high quality water level controller is available. With following features switch-less sensing elements. sump sensing (don’t let the motor run if sump is empty). auto and manual toggle switch with led indication. Motor status indicator overflow buzzer in manual mode (optional). functions : switch on the motor when water in overhead tank decreases below the mark. switch off the motor when overhead water tank get filled up to the mark. No need to switch on and off manually. technical specification: single phase 230v supply. sensing wire work upto 250 feet length. up to 5 hp single phase motor can be used warranty terms. Returns are accepted only on grounds of any manufacturing defects. returns shall be accepted within 7 days after receiving product. replacement will be done only after receiving defected product.

Avail from us excellent Water Level Controller, which is available with circuits for auto and manual function. We offer the Water Level Controller in different specifications as per the demands of the clients. The Water Level Controllers made available by us are highly appreciated in the market owing to their high performance and efficiency Functioning : Switch off Motor when water reaches maximum level in the overhead tank or water in the sump goes below foot valveSwitch off Motor in case the water stops flowing to the overhead tankMotor is switched on when the Water in overhead tank falls to low level or the Sump is full, disregarding any level in the overhead tank Attributes : Robust constructionLow power consumptionWater and Energy saving featureExcellent performanceEasy maintenanceCost effectiveness

We offer water level controller. A solution provider to a simple level monitoring to complicated level controlling. Over head tank and sump level control can be achieved by means of float switches of different types depending upon the type of the storage tank, like pvc, ms, ss and rcc. For a small size pvc tank have come up with a level controller to on and off pump motor depending on the water level in the storage tank and the same unit can be even used for sump water control by reversing the switches position.

This is the simplest Basic water level Controller with indicator it is the most economical and energy efficient product from CS Water Technologies. Visual Indications : Two sump levels, Two over head tank indication. Flow, motor on, dry run, power on.Features: The water level controller can switch on or switch off the pump, to maintain the pre defined water level at the storage tanks. Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement. Its has the following unique feature:1) When tank is in reserve mode or empty it automatically starts the motors if water is present in the Sump tank.2) If water is present in the line it indicates the presence on the unit (Flow Indicator).3) It indicates water levels reaching in tank, which is helpful if there are open taps, blockage, leakage or damage in the pipeline connected to the upper head, ground or the desired storage tank.4) It green colored 2 level indications (half tank & full tank) of water in tank as well as 2 level indications (foot valve level & half tank) of sump tank.5) On motor symbol green colored indication for motor ON & red colored indication for dry run of motor.6) Has rocker switch to select Auto/manual operation.7) Has soft touch ‘NEED’ button to switch ON the motor irrespective of any level in the overhead tank. Application: mono block pumps (sump motors)System is suitable only for single phase pump sets of maximum 1 H. P. ratings. This Water level controllers Indicator is highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc. At large our systems not only help you but your neighbors and society, also as it reduces the wastage of water by cutting down any further overflow than what you need.