Snr Electronics Kupwad, Sangli, Maharashtra

We present best quality Water Level Controller which is appreciated for its high performance. We make our Water Level Controller with the use of latest technology to ensure easy handling. These Water Level Controllers are tested under stringent industry norms to prevent any faults in performance or flaws. Features Microcontroller based technologyProtection from overload & dry run (Auto push button setting)Useful for 1 Ph. MotorpumpsSeparate indications for Overload, tank full and tank emptyCorrosion free Float sensorAuto Manual Facility Useful For Ground tankOverhead tanks1 ph. sub. pumps

Number Of Flower : Water Level Controller

Purity : Protection From Overload & Dry Run, Separate Indications For Overload, Tank Full And Tank Empty, Corrosion Free Float Sensor, Auto Manual Facility

We are instrumental in offering high quality Three Phase Control Panel to our clients. This Three Phase Control Panel is made with the use of cutting edge technology and are extremely easy to operate. Our Three Phase Control Panel is manufactured from best components and other high grade raw materials which assure endurance and durability. Features Microcontroller based technologyProtection from voltage unbalance, single phasing, overload (thermal) & dry run. (Auto push button setting)Motor starts automatically after time delay 1/3/5 minUseful for 3 Ph. 1 to 7.5 H.P. Openwell, Submersible, Monoblock pumpsetsSeparate indications for Timer, OK, SPP, Dry run & O/LOperates on low voltage (from 250 V)Single Phasing Protection up to motor terminalAuto Manual Facility3 pole MCB for mains ON/OFF & Short circuit protection

Number Of Flower : Three Phase Control Panel

Feature : Protection From Voltage Unbalance, Single Phasing, Overload & Dry Run

Suitable For : 3 Ph. 1 To 7.5 H.P. Pumpsets

Country of Origin : Operates On Low Voltage (from 250 V)

3 PH. CONTROL PANEL (UPTO 15 H.P. PUMPS)(SNR/3PH-S/D-ECO) Features:Micro Controller Based TechnologyMotor starts automatically after time delay of 1 / 3/5 min. (enable/disable facility)Operates on low voltage (250V)Useful for 3 Ph. Submersible, monoblock pumps.Useful for Fire Fighting motor pumps starter, water supply scheme for gram panchayatSeparate Indicator for time, OK, 0/L, SPP, Dryrun.Standard make contractor and thermal relay for switching.Auto/Manual facility on front panel.Heavy MS steel fabricated box with high quality powder coating like outdoor type.Digital Amp. & Voltmeter for display current and voltage.Panel material can be changed as per requirement of customer.Water level controller & other facility can be added as per requirement.In Reverse phase condition SPP LED blinks and display shows rsp.Technical Specifications:(As per SNR/IP 2007)and as per Auto switch RDM

Feature : Motor Starts Automatically After Time Delay Of 1/3/5 Min,Separate Indicators For Time,OK,O/L,SPP,Dryrun,Standard Make Contractor And Thermal Relay For Switching,Auto/Manual Facility On Front Panel,Digital Amp. & Voltmeter For Displaying Current And Vo

Country of Origin : 250V

Usage/Application : Control And Protection Of 3 Phase Submersible And Monoblock Pumps,Fire Fighting Motor Pumps,Water Supply Schemes

Material : MS Steel

Shape : Square

Country of Origin : India

Number Of Flower : Control Panel

Our clients can avail from us Submersible Pump Starters for domestic use which are highly demanded in the market. Our Submersible Pump Starters are manufactured from cutting edge technology and are made as per the international standards. These Submersible Pump Starters are power saving and are economic as well. Available For 0.5 to 3 H.P. units Attributes Thermal Overload ProtectionSuitable for Submersible PumpsVoltage and Current IndicationAutostart facility with on delay timer (1/2/3 min.)

Number Of Flower : Submersible Pump Starter

Purity : Thermal Overload Protection, Voltage And Current Indication, Autostart Facility With On Delay Timer

Suitable For : 0.5 To 3 H.P. Units

Material : Metal, Plastic, Etc

Features (Top Section)   Micro Controller Based Technology It indicates the levels of water in the Overhead tank thru S.S. sensor placed in overhead tank i.e. 20%, 40%, 60%, 80% & Full. As the tank gets full, buzzer sounds and you have to manually stop the motor and push reset button to stop buzzer sound.

Application : Monitoring Water Levels In Overhead Tanks

Number Of Flower : Water Level Indicator

Country of Origin : India

Model Number : SNR/WLC-FS1Ph

Number Of Flower : Water Level Controller

Material : Plastic

Application : Monitoring And Controlling Water Levels In Tanks Or Reservoirs

Power Source : Single-phase Power Supply

Availability : Lightweight Design

Features:Microcontroller based technology.Useful for ground tank, overhead tank for 1 PH. Monoblock and Openwell Pumps.Protection from overload & dry run. (auto push button setting).Separate indications for Overload, tank full and tank empty.Corrosion free Float sensor / Stainless Sensor.Auto Manual Facility.Useful for de-watering pumps.Digital Display shows VTG & AMPTechnical Specifications: Operating vol: 170 to 270VAC, 50 Hz.Overload setting: 130% of full load.Time delay: 7 sec.

Brand Name : SNR

Dimension : Varies Based On Model, Typically Compact For Easy Mounting.

Purity : Includes Adjustable Settings For Precise Water Level Control.

Power Source : Typically Powered By Electricity.

Application : Automatically Control Water Levels In Tanks Or Reservoirs.

Number Of Flower : Water Level Controller

Installation : Designed For Easy Installation And Setup.

POWER AUTOMATION PEOPLEProgram time compensation facility.Useful for 1 ph. 3 ph. applications upto 1 HP to 50 HP.Robot Timer 2010 can be used as Auto switch & Timer.Enable / Disable facility for each protection & automation.You can get current (A) of each Phase RYB on LCD display and also Phase to Phase voltage RY, YB, BR on display.Always shows realtime clock on LCD display.Motor start delay can be adjusted from 1 min to 10min.Useful for ZP, Grampanchayat watersupply schemes.All Technical specification & protection as per MJIP specifications. Technical specificationsOperating voltage- 220 to 440 VAC, 50Hz.Dry-run Trip timing -7 sec.O.R setting- 70% of full load current.Trip time delay -4 sec.Star to Delta time delay-7 sec. Settable.Voltage Unbalance setting- 35 V (Phase to Phase).Settable ON delay time 30 sec. to 4 min.

Star To Delta Time Delay : 7 Sec

Trip Time Delay : 4 Sec

Number Of Flower : Microcontroller

Power Source : Electric

Country of Origin : India

SNR/ROBOT-2ROBOT TIMER (SNR/ROBOT-2) FeaturesMicrocontroller based technology.High Quality LED Display.Useful for timer for streetlight, garden lighting, housing society, signboards etcSeparate 2 programe in 1 unit for 2 different applications.Use can be 1 ph. as well as 3 ph. supply.Auto/Manual Facility.Indicator for each program ON on LED as well as LCD display.Low cost. High quality, Domestic Timer for any timer purpose. Technical SpecificationsMicrocontroller based technology.operating voltage.For 1 Ph. 220 to 440 VAC 50Hz.For 3 Ph - 410 to 440 VAC For 1 Ph IC PROGRAM CPT) 

Usage : Streetlight,Garden Lighting,Housing Society,Signboards,Domestic Timer For Any Timer Purpose

Country of Origin : India

1 PH. OPENWELL STARTER WITH PROTECTION + WLC + AUTOSTART(SNR/OW/DMC) (SNR/OW/DMC/WLC/AS)FeaturesMicrocontroller based technologySuitable for Openwell Sub. PumpsAvailable for 0.5 to 2 H.P. PumpsDigital Ammeter & Voltage indicationAfter Dryrun Restart Timer (Settable)Dryrun overload % settable2 Tank WLC Facility (In WLC/AS)Auto/Manual FacilityTechnical Specifications Operating Voltage: 160 V to 270 VACOverload Trip Time – 2S to 30SDry Run Trip Time – 7SDry run setting – 80% of full load (settable)Overload setting – 130% of full load

Number Of Flower : Submersible Pump Starter

UNIQUE NO VOLT COIL (220 V TO 360V) (SNR/NVC) FeaturesFor 1 PH. & 3 PH.High quality coil for DOL and Star Delta Starter,Voltage range 160V to 230V ac & 280 V to 440 V ac.

Feature : For 1 PH. & 3 PH.,High Quality Coil

Application : For DOL And Star Delta Starter

Number Of Flower : Coil

Country of Origin : India

Condition : New

Material : Metal

Country of Origin : 160V To 230V Ac & 280V To 440V Ac

POWER AUTOMATION PEOPLEMOBILE START UNIT (SNR/MSU/PG) Features:Microcontroller based technology.Useful for 1 Ph. & 3 Ph. to 30 H.P.Motor can be operated by mobile on calling or SMS from any destination automatically. (Mobile Network necessary)You will get Audio feedback or SMS feedback of each operation and protection.Mobile Auto can Operate from Specific Numbers (4 Nos.) which will be feed by customer for his convenience to avoid misuse of Mobile Auto.Protection from voltage unbalance, reverse phasing, single phasing, & Dryrun.In phase reversal condition SPP LED Blinks.Separate indicator for OK, SPP, N/L & Mobile ONYou can direct insert Simcard to this unit.For details of voice feedback & other information please refer instruction manual with this unit.Technical Specifications:Operating voltage – 220 to 460 VAC, 50 Hz.Dry run trip timing - 7 Sec.Dry run setting – 70% of full load currentSPP Trip time delay - 4 sec.Star to Delta Time Delay – 7 Sec.Voltage Unbalance setting - 35 volts. 

Country of Origin : India

MOBILE START UNIT (SNR/MSU/PG/4G) Features: Microcontroller based technology. Useful for 1 Ph. & 3 Ph. to 30 H.P. Motor can be operated by mobile on calling or SMS from any destination automatically. (Mobile Network necessary) You will get Audio feedback or SMS feedback of each operation and protection. Mobile Auto can Operate from Specific Numbers (4 Nos.) which will be feed by customer for his convenience to avoid misuse of Mobile Auto. Protection from voltage unbalance, overload, High voltage, low voltage, reverse phasing, single phasing, & Dryrun. Separate indicator for OK, SPP, N/L & Mobile ON In phase reversal condition SPP LED Blinks. You can direct insert Simcard to this unit. For details of voice feedback & other information please refer instruction manual with this unit. Digital display for voltage & current. Over load Trip current & dry run Trip current shows on display with LED Indicator.   Technical Specifications: As per Model - SNR/MSU/PG Technical Specifications: As per Model - SNR/MSU/PG  

Application : industrial,Mobile Start Unit For 1 Ph. & 3 Ph. Up To 30 H.P. Motors, With Mobile Operation Via Calling Or SMS, Protection From Various Electrical Issues, Digital Display For Voltage & Current.

Country of Origin : India

Type : Microcontroller

Power Source : Electric

Specialities : Microcontroller Based Technology.,Motor Can Be Operated By Mobile On Calling Or SMS From Any Destination Automatically.,Audio Feedback Or SMS Feedback Of Each Operation And Protection.,Mobile Auto Can Operate From Specific Numbers (4 Nos.),Protection From

Display : Digital LCD

Frequency : 50 Hz

SNR OW/WLC NAL(SNR/MPU/OW/DG/NAL)AUTO START UNIT(SNR OW/WLC/NAL)Features:Microcontroller base Technology.Suitable for 1 Phase openwell sub motors.0.5 HP to 2 HP single model.Easy to operate and install.Protection overload & Dry Run.Overload & Dry Run percentage settable7 seg. digital displayDisplay shows Voltage/ current and Display Latch for fault condition.In Auto mode water level controller for overhead tank function:As per condition water comes and overhead tank empty it starts the motor automatically with the help of sensors.Technical Specifications:Operating Voltage – 160 V to 270 VACCurrent Range – Max. 30 amps.Overload Trip Time – 2 Sec. to 30 Sec. (IDMT)Dry Run Trip Time – 30 Sec.

Purity : Microcontroller Base Technology, 0.5 HP To 2 HP Single Model, Easy To Operate And Install, Protection Overload & Dry Run, Overload & Dry Run Percentage Settable, 7 Seg. Digital Display, Display Shows Voltage/ Current And Display Latch For Fault Condition,

Application : Suitable For 1 Phase Openwell Sub Motors

Number Of Flower : Water Level Controller

Country of Origin : India

Display Type : Digital

Condition : New

Packaging Type : Multicolor

Driven Type : Electric

Material : PVC

SNR/MK/BCH/DG/AS-3 & 5 H.P.Features:Micro Controller Based Technology.Suitable for newly launched 3 HP to 5 HP 1Ph. Sub. PumpsLED display for each protection & facility.Voltage & current shows continuously on LED display one by one.Standard make capacitor for as per HPUsed 40 A contactor or power relay 63 A for switching operation.ISI fireproof cable wiring for panel.Heavy MS with powder coated cabinet.Autostart with on delay timer & also WLC facility available on request.O/L. & D/R protection for pumps.O/L. & D/R % settable as per requirement.Technical setting & any additional change can be done as per requirement.   

Number Of Flower : Submersible Pump Starter

Country of Origin : India

Application : Industrial, Suitable For 3 HP To 5 HP 1Ph. Submersible Pumps

2 PH. MK/BCH TYPE STARTER WITH AUTOSTART UPTO 7.5 HP(SNR/MK/BCH/AS-2 PH)Features Micro Controller Based TechnologySuitable for 2Ph. upto 7.5 HP Sub. PumpsVoltage & current shows & fault shows on LED DisplayAuto Start cap. cut facilityOverload trip time IDMTDryrun trip time 10 Sec.High Voltage & Low Voltage Optional25 A- 4 Pole contactor used to isolate both phase

1 PH. SUBMERSIBLE MCB STARTER (SNR/MCB/DG) FeaturesSuitable for Submersible PumpsAvailable for 0.5 to 2 H.P. PumpsMCB Overload ProtectionDigital Voltage & Current Display

Number Of Flower : Submersible Pump Starter

Country of Origin : India

Application : Industrial, Suitable For Submersible Pumps,0.5 To 2 H.P. Pumps

Rated Power : Electric

3 PH. CONTROL PANEL (UP TO 5 H.P.) (SNR/IP/DMS (RLY) Features:Micro Controller Based TechnologyMotor Autostart Facility with settable on delay time.Protection from voltage unbalance, single phasing, overload, Dryrun & also current sensing SPP, (Push button for Setting)LED Display for voltage & ammeter & also indicator40 A power relay for ON/OFF switching.Compact size.0/L percentage can be settable from 110% to 170%.N/L % can be set from 90% to 50%After Dry run trip restart relay facility available (with variable time set).SPP/0/L protection enable/disable facility, as per DMAUseful for 3 Ph. 1 to 5 H.P. Openwell, Submersible, Monoblock pumps.Auto/Manual Facility.Water level controller facility also available.In reverse phase condition SPP LED Blinks and display shows rsp.Technical Specification:As per Model - IP2007

Feature : Micro Controller Based Technology,Motor Autostart Facility With Settable On Delay Time,Protection From Voltage Unbalance,Single Phasing,Overload,Dryrun & Current Sensing,LED Display For Voltage & Ammeter,40 A Power Relay For ON/OFF Switching,Compact Si

Usage/Application : 3 Phase Motor Control Panel For 1 To 5 H.P. Pumps

Country of Origin : India

Phase : Three Phase

Country of Origin : 220V

Material : Stainless Steel

Number Of Flower : Control Panel

3 PH. CONTROL PANEL (UPTO 50 H.P. PUMPS)(SNR/IP/2011 (20H.P.), SNR/IP/2011 (50H.P.)) Features:Micro Controller Based TechnologyMotor starts automatically after time delay of 1 / 3/5 min. (enable/disable facility)Operates on low voltage (250V)Useful for 3 Ph. Submersible, monoblock pumps.Useful for Fire Fighting motor pumps starter, water supply scheme for gram panchayatSeparate Indicator for time, OK, 0/L, SPP, Dryrun.Standard make contractor and thermal relay for switching.Auto/Manual facility on front panel.Heavy MS steel fabricated box with high quality powder coating like outdoor type. (IP-54)3 pole MCB for main ON/OFF and short circuit protection.Digital Amp. & Voltmeter for display current and voltage.Panel material can be changed as per requirement of customer.Water level controller & other facility can be added as per requirement.In Reverse phase condition SPP LED blinks.Technical Specifications:(As per SNR/IP 2007)

Application : 3 Ph. Submersible,Monoblock Pumps,Fire Fighting Motor Pumps Starter,Water Supply Scheme For Frampanchayat

Packaging Type : Powder Coating (Outdoor Type)

Body Material : MS Steel

Number Of Flower : Pump Control Panels

Country of Origin : India

3 PH. CONTROL PANEL (SNR/IP 2007) Features:Microcontroller based technologyMotor starts automatically after time delay 1/3/5 minProtection from voltage & current unbalance, single phasing, overload & dry run. (auto push button setting)RYB indication for each phaseOperates on low voltage (from 250 V)Useful for 3 Ph. 1 to 6 H.P. Openwell, Submersible, Monoblock pumpsets.Separate indicators for Timer, OK, SPP, Dry run & 0/L.Auto / Manual Facility.3 pole MCB for mains ON/OFF & Short circuit protectionTechnical Specification:Operating voltage: 220 to 460 VAC, 50 Hz.Dry Run trip timing - 7 sec.Overload Electromagnetic Relay.Dry Run setting -70% of full load current.SPP Trip time delay - 4 sec.Voltage Unbalance Set - 35 volts.Voltage Sensing SPP.

Feature : Microcontroller Based Technology,Motor Starts Automatically After Time Delay 1/3/5 Min,Protection From Voltage & Current Unbalance,Single Phasing,Overload & Dry Run,RYB Indication For Each Phase,Operates On Low Voltage (from 250 V),Separate Indicators F

Usage/Application : For 3 Phase 1 To 6 H.P. Openwell,Submersible,Monoblock Pumpsets

Country of Origin : India

Power Type : AC

Shape : Square

Phase : Two Phase

Country of Origin : 250V

Material : Stainless Steel

Number Of Flower : Control Panel

1 PH. SUBMERSIBLE STARTER (SNR/EP2007, SNR/EP2007 A) FeaturesMicrocontroller-based technology.Suitable for Submersible Pumps.Available for 0.5 to 2 H.P. PumpsNo Volt Release.(Auto OFF on failure of supply)Protection from O/L & Dryrun.Separate indicators & Voltmeter / AmmeterAutomatic push button O/L and N/L settingMotor Starts Automatic after supply is ON in Auto start model. Technical SpecificationsStart Capacitor: 100/120, 120/150MFD.Run Capacitor: 25/36/50 MFD.Dry run setting: 80% of full load (settable)Overload setting: 130% of full load 

Number Of Flower : Submersible Pump Starter

Country of Origin : India

Phase : Single

Application : Industrial, Suitable For Submersible Pumps

1 PH. SUB CONTROL PANEL (DMC) FULL AUTOMATIC Features:Micro Controller Based TechnologySuitable for 1 Ph. Submersible Pumps.Available for 0.5 H.P. to 2 H.P. Sub PumpsLED display for each protection & facilityAuto set as per motor current (as per HP)Voltage & current shows continuously on LED display one by oneO/L & D/R % SettableAfter D/R Restart Settable (1 min. to 180 min.)Water level Controller facility available for upper tank in auto start model.(SNR/EP/2007/DMC/A) – On & Off time settable (Cyclic)SNR/EP/2007/DMC – Off time settable (1 min. to 255 min.)Auto Start after power came back (auto delay timer) 

Number Of Flower : Submersible Pump Starter

Country of Origin : India

Phase : Single

Frequency : 50 Hz

Application : Industrial, Control Panel For Single-phase Submersible Pumps

UNIQUE DOL STARTER (SNR/DOL) Features Useful for 3 PH. motor upto 7.5 H.P. Direct online, Air break push button type With thermal overload protection relay No Volt coil voltage from 275 V to 440 V operating Heavy powder coated encloser

Material : Metal

Country of Origin : 415V

DIGITAL A/V METER BOX FOR 3 PHASE (SNR/DGAV3) FeaturesUseful for 3 Ph. Motor upto 20 HPSeperate Digits meter for Amp. and Volt (upto 60 A and 600V)Seperate RYB IndicatorIt displays RN, YN, BN, RY, YB & BR. six types of voltages & 1 Amp.Nano size, long life with 12 M. warranty 

Total Carbohydrate : 12 Months

Number Of Flower : Digital A/V Meter Box

Country of Origin : India

Phase : 3 Phase