Key fetures
RISC Microcontroller based field proven design
Three digit PF display
Individual Stage LED indications
Maximum upto 15 stages
Low PF Alarm
Indication range from 0.5 lag to 0.5 lead
User settable High and Low set points also in three digit
User settable bank on time, bank off time, bank discharge time
Settable Cyclic or FIFO switching sequence
Settable No Load Compensation (NLC)For Transformer
Auto or Man Mode Selectable from switch
For all settings the controller is protected by a password to avoid unauthorized access
Test mode for testing the wiring logic when there is no load current
Input voltage from phases R & Y
Input Current from phase B CT
All Electrical Connections on rear side
Potential free relay contact outputs to operate the banks
Applications1 Ph. 3 Ph. Applications Upto 1 HP To 50 HP
TimerRobot Timer 2010
SwitchAuto Switch & Timer
Voltage220 To 440 VAC, 50Hz
Dry-run Trip Timing7 Sec
O.R Setting70% Of Full Load Current
Voltage Unbalance Setting35 V (Phase To Phase)
ON Delay Time30 Sec. To 4 Min
POWER AUTOMATION PEOPLEProgram time compensation facility.Useful for 1 ph. 3 ph. applications upto 1 HP to 50 HP.Robot Timer 2010 can be used as Auto switch & Timer.Enable / Disable facility for each protection & automation.You can get current (A) of each Phase RYB on LCD display and also Phase to Phase voltage RY, YB, BR on display.Always shows realtime clock on LCD display.Motor start delay can be adjusted from 1 min to 10min.Useful for ZP, Grampanchayat watersupply schemes.All Technical specification & protection as per MJIP specifications. Technical specificationsOperating voltage- 220 to 440 VAC, 50Hz.Dry-run Trip timing -7 sec.O.R setting- 70% of full load current.Trip time delay -4 sec.Star to Delta time delay-7 sec. Settable.Voltage Unbalance setting- 35 V (Phase to Phase).Settable ON delay time 30 sec. to 4 min.
Back
Post Free Ad
www