Melt Flow Index Tester Dealers in Faridabad

Presto’s Melt Flow Index tester is designed exclusively for the perfect measurement of melt flow rate of molten plastics or granules. The Plastic melt flow index tester is calculated by performing a manual/ automatic test procedure on a testing instrument in order to check the melt volume rate of the flow of plastic granules (which is measured in grams in a precise time of ten minutes). The procedure passed through a die having a particular measurement in diameter and length. It is carried out under a specific pressure and temperature with the ideal position of a piston in a cylindrical container inside a heated metallic barrel. Presto is a leading manufacturer and supplier of melt flow index tester, melt flow resistance (MFR) Tester, Polymer testing machine, plastic granules testing instruments etc. all over the world for the purpose of flow rate testing. The testing equipment meets ISO and ASTM standards with the main focus on meeting the principal circumstances of load and temperature. The Presto’s Melt Flow Index Tester has a PID temperature controlled based on Micro Processor. Its temperature range varies from ambient to 400°C. It also has a very good resolution of 0.1°C with the accuracy of ± 0.1°C. The testing instrument has a pre-settable digital timer extensible up to 59 minutes, 59 seconds and with the signal output. The instrument ensures easy operation and accuracy.     Presto, as Melt Flow Index Tester manufacturers, provides superior quality testing instruments with best specifications which are totally different from other products currently available in the market. We manufacture our product with a different outlook and with a unique design. Following are the details: “Piston head” of Melt Flow Testeris available in a dimension of 9.47 mm diameter. It has a heater tube cavity with a diameter of 9.55mm The Dimensions of Die affixed on a tester is 2.095mm Weight or pressure of piston on granules can be 1.2 kg, 2.16kg, 3.8 kg, 5kg and 10 kg. IS 10810-1984: Methods for test for cables part 23: melt flow Index ASTM D1238-13: Standard Test method for flow rates of Thermoplastic by extrusion plastometer Moreover, the MFIis available with the Lab Weighing Balance of 200gms with the Least Count of 0.01grams.

• Material: Mild Steel
• Power: 220V, 50 Hz
• Features: Automatic sample cutting,Microprocessor based PID controller
• Temperature Range: Ambient to 400 degree C
• Brand: PRESTO
• Accuracy: plus minus1 degree C
• Timer: Digital Preset upto 999 seconds
• Dimensions Of Piston Head: 9.474mm plus minus 0.007mm

• weights: 1.2 Kg, 2.16 Kg, 3.8 Kg

In plastic manufacturing industries, many properties of plastics and Polypropylene are needed to be examined that explains whether the material is appropriate for an application or not. These properties show the visible effect on the strength and durability of these products. The major factor of the help to measure the melt flow rate of the granules is Melt Flow Index Tester. The Melt Flow rate is the best way to measure the flow rate of the polymers when it is kept in its molten state. The MFR directly indicates the molecular structure, viscosity and weight of the granules. The molecular weight of the plastic is inversely proportional to the MFR. The best way to calculate the melt flow rate of polypropylene and polymers is Melt Flow Index Tester. It is the best and main testing device that helps to measure the accurate Melt Flow Index of Polypropylene.

• Feature: Automatic Sample Cutting,Microprocessor-based PID Controller,Compact And Stable Structure
• Temperature Range: Ambient to 350 ºC
• Display: Digital 7 Segment
• Material of Heating Barrel(Cylinder): Die Steel
• Sample Cutting Motor: 2 Torque 7Kg/cm, 60RPM
• Dimensions: 300x644x642 mm

  The melt flow rate of the polymers is one of the essential properties of the materials that will help the manufacturers in determining the rate at which it flows. This property of the material is important as it provides the necessary data on the mass flow rate of the polymer. Thus, to test the melt flow properties of the materials, we at Presto have recently designed a high-quality Melt Flow Index Junior model. MODEL      MFI - Junior This highly versatile melt flow index tester model is a very accurate and reliable instrument for checking the melt flow properties of materials. The tester is easy to use and can be operated with great precision. It comes with a weighing balance and performs automatic cutting of samples.  The Melt Flow Index Tester Junior has been designed with highly advanced features that make it easy for manufacturers to conduct melt flow index tests on the materials.   With its wide range of capabilities, the melt flow index tester is an essential lab testing equipment for the polymer and plastic product testing industry. The melt flow Index of thermoplastic material is expressed in terms of grams per 10 min of extrudate of molten resins that flow through the heated cylindrical barrel.   This high-quality lab testing instrument has been designed as per industrial standards that include ASTM D 1238-1992, IS 2267-1972, IS 2530-1963, and IS 10810-1984. This will ensure accuracy in test results. With the use of this high-quality lab testing instrument, manufacturers of the polymer industry can identify potential processing problems and ensure that products meet performance requirements.

• temperature: 400°C

Presto Melt Flow Index tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a jet of a particular length and diameter. The test is carried out under prescribed condition of temperature, load and piston position in a cylindrical cavity inside a heated metallic tube barrel. The Presto Melt Flow Index tester accurately provides all standard terms of temperature and pressure strictly as per standards ASTM D 1238-1992, ISO 1133, IS 2267-1972, IS 2530-1963, IS 10810-1984.

The melt flow index tester (Deluxe Model) is a significant attribute of any plastic material that can help in determining various chemical and physical properties of the materials. The melt flow index tester is a highly precise and accurate instrument that offers exact and accurate determination of melt flow index of a plastic resin. The melt flow index of a plastic resin is termed as the weight of the resin flowing through a capillary tube every ten minutes under an unambiguous load or shear stress. The test procedure includes passing the molten plastic granules from a capillary tube of specific dimensions. A specified load is applied to the test sample with the help of a piston. Apart from that the following are also available for the customers - Melt Flow Index NXG Model.   The melt flow index tester is used for determination of the melt flow rate of various materials such as plastic granules. It is a widely used product in plastics and polymer industry. The instrument is designed and manufactured as per standards set by ISO and ASTM and is mainly focused on meeting the principal conditions necessary for the test procedure. The instrument has a PID temperature controller, and its working is based on a microprocessor. The temperature can vary from ambient to 4000C. The resolution of the instrument is also 0.10C and has an accuracy of ±0.10C. The apparatus comes with a digital timer that is pre-settable and can be extended to 59 minutes and 59 seconds. There are standards accessories available with the devices that are a piston, orifice, spanner, funnel, spoon, mirror, plumb line, material charger, barrel cleaners and so forth. The machine is manufactured on a base plate of heavy metal for long life, safety and stability. The tester is in strict adherence to standards of ASTM D 1238-1992. The instrument has a fine finish in grey and blue color. The product comes with a complete user guide and a conformance certificate that can easily be traced to any labs approved by NABL.    Features:   The instrument is capable of maintaining the accurate temperature needed for the test procedure that ranges from ambient to 400 0C. The temperature controller used in the machine is PID which is a completely microprocessor based. The machine has a high rate of accuracy and repeatability and incorporates a pre-settable timer. The instrument has a feature to cut the test samples automatically which makes the results reliable and test procedure easy. Additionally, the standard accessories and resources are available with the product.   

Presto Stantest offers two models of Melt Flow Index Tester in different countries like Nigeria, Bahrain, Bangladesh, Indonesia, Zambia, Thailand, Sri Lanka and UAE i.e. deluxe model and NXG model. It is the best way for Melt Flow Index Calculation. The instrument appropriately measures the melt flow rate or melt volume rate of the plastic granules that are placed in the cylindrical vessel under specific temperature. To manufacture the best quality of testing machines, Presto follow the guidelines of all relevant standards that are provided by national and international authorities to fulfill the international testing requirements as well. The quality of the plastics and polymers can be determined easily by following the process of Melt Flow Index Calculation.

Melt Flow Index Tester, Polyol Chemicals, Iso Methyl Alcohol, Refrigeration

Melt Flow Index Apparatus, Semi Automatic Chemistry Analyzer