Primer Paint Dealers in Faridabad

(30 products available)

All IndiaFaridabadMumbai Pune Delhi Ahmedabad Chennai Kolkata Bangalore Hyderabad Vadodara

Ballabhgarh

Explore More

Premium
Asian Paints Smartcare Apcoflor HFP 130 Epoxy Primer Paint

270 / Kilogram

MOQ100 Kilogram
Brand NameAsian Paints
Packaging TypeClear
Packaging Size10 Kgs (part A: 6.5 Kgs & Part B: 3.5 Kgs)
Country of OriginIndia
AppearanceGlossy
Recommended DFT/ Coat125 - 175 μm
Theoretical Covering Capacity6.7 - 4.8 sq.mtr/ kg @ 3mm DFT
6.7 - 4.8 sq.mtr/ kg @ 3mm DFTMixing Ratio (by weight)Base : Hardener 65 : 35
Drying TimeSurface Dry: 6 hours Hard Dry: 24 hours Full Cure: 7 days
Consumption0.15 - 0.21 kg/sq.mtr.
Induction time10 minutes
Pot life60 minutes
Bond StrengthNot less than 1.5 MPa (Concrete Failure)
Overcoating intervalMin. : 8 hours Max : 24 hours (provided surface is clean and free from contamination)
Shelf LifeAtleast 12 Months
Regulatory InformationFlash Point: Base - Not Less Than 24°c; Hardener - Not Less Than 24°c Voc: 120 Gm/ Ltr A

FEATURES\\\\n• High performance phenlkamine based epoxy primer.\\\\n• Designed as a high solid primer for concrete surface.\\\\n• Primer for APCOFLOR flooring systems.\\\\n• Provides good adhesion between concrete surface and subsequent APCOFLOR topcoat.\\\\n• Good penetrating and sealing properties.\\\\n• Good bonding with sound old and new concrete surfaces.\\\\n• Excellent bond strength.\\\\n \\\\nThe data given is for guideline only. The physical values are subject to normal manufacturing tolerances, colour and testing variances. The coverage & consumption figures are theoretical and do not allow for any additional material required due to surface porosity, surface profile, variations in level or wastage etc.\\\\nThe actual drying time/ overcoat interval may be shorter or longer, depending on film thickness, ventilation, humidity, temperature etc. The information provided above is at 30°C and 65% relative humidity.\\\\nSUBSTRATE QUALITY\\\\n• Concrete substrates must be sound and of sufficient compressive strength (minimum 20 Mpa) with a minimum tensile strength of 1.5 Mpa.\\\\n• A sound, clean and dry substrate is absolutely essential for successful coating application and ensuring maximum bonding between the substrate and coating system.\\\\n• The substrate must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treat ments, etc. and have a moisture content less than 5% prior to application of the primer. Ensure that the substrate does not suffer from rising moisture and potential osmosis problems.\\\\n \\\\nSURFACE PREPARATION\\\\nNew Concrete Floors:\\\\nShould be at least 28 days old or have a moisture content of less than 5% before proceeding with epoxy primer application. Laitance and deposits on new concrete floors are preferably removed by light grit/ shot blasting, mechanical scarifying or grinding to achieve an open textured surface.\\\\nOld Concrete Floors:\\\\n• Determine the general condition, soundness, presence of contaminants, presence of moisture vapour emission and the best methods to prepare the surface to receive floor coating system. Mechanical surface profiling by grit or shot blasting, grinding or scarifying are the preferred floor preparation methods on old concrete floors.\\\\n• Hydrophobic contaminants can be identified by a simple water drop test. Other contaminants can be identified by pH.\\\\n• Remove localized weak or deteriorated materials from the surface. Remove bond-inhibiting materials such as oils, grease, \\\\n wax,fatty acids, and other contaminants. This can be accomplished by the use of detergent scrub- bing, low pressure water cleaning (less than 5000 psi), steam cleaning, or chemical cleaning. Acids and alkalis can be removed by neutralizing to form a water soluble salt and then high pressure water cleaning and mop- ping it off to dry state.\\\\n• In the areas where the contaminants cannot be removed, complete removal and replacement of the contami- nated surface is typically considered.\\\\n• Surface defects such as voids, bug holes, excess porosity, and physical and chemical damage are usually filled or repaired prior to the installation of the floor coating system. Materials such as slurries, mortars, and polymer concrete are used to level, smooth and patch concrete surfaces.\\\\nMIXING\\\\nStir the base and hardener separately. If settling is observed in the base or hardener, loosen the settled material with the help of hand stirrer followed by power driven stirrer for quick homogenous mixing. Mix hardener gradual-ly into the base under continuous stirring as per the stated mixing ratio. Apply after induction time and before expiration of pot life. Over mixing must be avoided to complete unit in the potortion supplied.\\\\nFLOOR JOINTS\\\\n• All cracks and construction joints present, based on the depth of the crack, should be filled either with Apcoflor 2K Screed after primer application.\\\\n• The expansion joints should not be overcoated with the coating and to be addressed with suitable material.\\\\nAPPLICATION\\\\n• All dust present must be removed by vacuuming prior to primer application. It is suggested that the product be applied by stiff brush/ roller/ putty knife for better penetration. The primer should be well ‘scrubbed’ into the substrate to ensure full coverage, but care should be taken to avoid over application or ‘ponding’.\\\\n• The coverage would vary significantly based on the nature of the concrete surface. On porous surface where the primer is absorbed quickly leaving dry patches, a second coat is recommended.\\\\n• Out gassing may occur due to the porosity of some concrete surfaces. To reduce the effect of out gassing, the primer and coating should be applied when the temperature of the concrete substrate is dropping. This usually occurs in the evening; however, the concrete substrate temperature should be measured with a surface thermometer for verification. Double priming will greatly reduce the effects of out gassing by additionally filling the pores in the concrete and prevent air release from the porous substrate which may cause bubbles in the epoxy topcoat later.\\\\n• Primed surfaces should be recoated within 24 hours. For longer waiting periods, wipe with xylene until surface becomes tacky. If surface remains hard, abrasive sanding is required.\\\\n• A minimum dry film thickness of 50 microns is recommended. Thinner T 141 (0 – 10 % by volume) may be used depending on the site condition.\\\\n• Freshly applied primer should be protected from damp, condensation and water for atleast 24 hours.\\\\n• At low temperatures, the chemical reactions are slowed down; this lengthens the pot life, open time & curing times. High temperatures speed up the chemical reactions thus the time frames mentioned above are short ened accordingly.\\\\nAPPLICATION CONDITION\\\\n• Residual moisture content of the concrete substrate should not exceed 5%.\\\\n• No rising moisture & potential osmosis problems.\\\\n• Substrate temperature should be at least 3°C above dew point but not above 50°C.\\\\n• Recommended ambient temperature for application is between 10°C - 40°C.\\\\n• Relative Air Humidity (RH) to not exceed beyond 80%.\\\\n \\\\nCLEANING\\\\nAll tools and equipment can be cleaned with Thinner T 141 immediately after use.\\\\n \\\\nSAFETY INFORMATION\\\\n• As a general safety measure, inhalation of solvent vapours or coating mist and contact of coating with skin & eyes should be avoided. Forced ventilation should be provided when applying coating in confined spaces or stagnant air. Even when ventilation is provided, respiratory, skin and eye protection is always recommended when spraying the coating.\\\\n• Please refer our Material Safety Data Sheet prior to using the product

...more
www

Excel Flooring & Paint Solutions

Sector 39, Faridabad

GST 1 yr
Premium
Natron PP Primer

Get Price Quote

Number Of FlowerAdhesion Promoter
FeatureSingle-component,Clear (colorless),Non-sanding,Fast-drying (<5 Seconds),Low, Sweet Smell,Improves Surface Finish
Brand NameBoston Industrial Solutions
Packaging TypeBottle
Packaging TypeColorless
Storage TypeDry Place Room Temperature
Material CompatibilityPlastics, Rubber, Soft Touch, Glass, Metals
Sizes Available8oz, 1Qt, 1 Gallon
Application MethodWipe With Primer-soaked Cloth, Air Dry, Then Print

About the Product This primer is a single-component, clear (colorless), non-sanding, fast-drying adhesion promoter that prepares plastic for printing with any type of ink. Works on many substrates Extremely fast drying <5 seconds Low, sweet smell compared to other primers Improves surface finish Sizes: 8oz /1Qt / 1 Gallon The Natron™ PP primer for plastics is the only primer that you will need for all your printing applications. Use this primer on: Polyolefins, polypropylene (PP), polyethylene (PE), Polyacetal (POM), Nylon, EPT rubber, etc. Stainless steel, coated metals, Soft touch, and Glass Learn more about the one component Natron™ EK series ink for plastics. How to Use Natron™ PP primer Wipe the substrate(s) with Natron™ PP primer-soaked-cloth lightly one or two times. Air dry in seconds. Inkjet, pad print or screen print your product.

...more
www

Real Pad Printers

Mathura road, Faridabad

GST 15 yrs 4.7 (30)
Water Thinnable Primer

Get Price Quote

We are identified as one of reputed Water Thinnable Primer Manufacturers in the country. Our Water Thinnable Primer provides suitable substrate for wall finishing. It has to be thinned with water to get the applicable consistency. Why Our Water Thinnable Primer?Excellent coveringEasy brushingQuick dryingBetter sealing powerAlkali resistant Used AsPrimer for painting of wall finishes
...more

Mitco Tiles & Paints Pvt. Ltd

Dabua Pali Road, Faridabad

18 yrs
Etch Primers

Get Price Quote

Brand NameR.k. Paints
Packaging Size20 Lt (Two pack)
FeaturesHigh adhesion power,Chemical and oil resistance,Accurate composition
Usage/ApplicationIndustrial
Primer Base TypeOil Based
Application MethodSpray gun
Flash Point24 Deg C
Is It Anti CorrosiveAnti Corrosive

...more
R.k. Paints & Chemicals

Dabua Pali Road, Faridabad

9 yrs
Zinc Primer

Get Price Quote

Corrosion can be controlled by providing a barrier against the passage of ions and/or oxygen and water. The lower the permeability of the coating for these species, the better the barrier properties. It is important to realize that a barrier coating cannot repair corrosion products or other surface impurities already present on the metal surface. For corrshield properties, these coatings use a new polyester system technology. They either reduce or eliminate the pre-treatment necessity. It is zinc rich epoxy based thermosetting powder coating designed to enhance the corrosion resistance of steel items. It has been designed as a base coat for powder top coats. Zinc Primer has a multitude of users over steel objects. If chemical treatment is difficult, a zinc base powder primer provides the solution on shot blasted steel. Applications Gas cylinder & Tanks Agriculture Machinery Street & Garden Furniture Valves
...more

Nivera Paints (india) Pvt. Ltd.

Sector 58, Faridabad

9 yrs
Facescanada Vitamin Rich Primer

597 / piece

MOQ100 piece
Brand NameFacescanada
FormCream
ApplicationMake Up
Skin TypeFor All Skin Type
Packaging TypeJar
Packaging Size100ml
Country of OriginIndia

...more
Gohar Trade

Faridabad

2 yrs
Facescanada Vitamin Rich Primer

Get Price Quote

Zinc Rich Primer Powder, Polyurethane Coating Powder, Liquid Acrylic Coatin

Airsea Exports LLP

Sector-7A, Faridabad

GST 2 yrs 5.0 (1)
RED OXIDE ZINC CHROMATE PAINTS

Get Price Quote

THESE PRIMERS ARE PRIMARILY USED IN INDUSTRIAL WORK.ZINC CHROME PROVIDES THE CORROSION INHIBITING ACTION.THE POWERFUL OXIDISING PROPERTY OF THE CHROMATE ION OXIDISE FERROUS IONS TO FERRIC OXIDES ON THE ANODE SURFACE AND SIMULTANEOUSLY COMBINATION TAKES PLACE TO FORM AN ADHERANT FERRIC/CHROMATE COMPLEXES.THIS SEALS THE ANODIC AREAS AND RETARDS CORROSION.
...more

Indian Organic Corporation

Sector 25, Faridabad

14 yrs
kalyan ext primer paints

Get Price Quote

Brand NameKalyan Ext
CertificationISO9001:2008
Packaging TypePlastic Bucket
TypePrimer Paint
Country of OriginIndia

We are proud to offer Kalyan Ext Primer Paints, a high-quality product manufactured in India. Our primer paints are ISO9001:2008 certified, ensuring top-notch quality and performance. Packaged in convenient plastic buckets, our primer paint is easy to use and store. Ideal for both residential and commercial applications, Kalyan Ext Primer Paints provide a smooth and durable base for your painting projects. Trust Kalyan Ext for reliable and efficient primer paints that meet international standards.

...more
Kalyan enterprises

Faridabad

1 yr
Stoving Thinner

Get Price Quote

MOQ200 Litre
Country of OriginIndia
StateLiquid
StateLiquid
Brand NameVimal Paints
Packaging Size20L
FeatureAccurate and pure composition.
Purity95-98 %
Production Capacity1000 ltr per/day

...more
M/s Vimal Paints

Dheeraj Nagar, Faridabad

GST 12 yrs 5.0 (1)
Epoxy Zinc Rich Primer

Get Price Quote

FeaturesGood impact resistance, Easy to integrate and apply with the intermediate solidified layer, Anticorrosive and high wear resistant
Sai Chem

NIT, Faridabad

9 yrs
Red Oxide Primer

Get Price Quote

Shelf Life1Years
Packaging TypePlastic Packet
FormPowder
Drying ProcessSun Dry
Packaging Size100gm, 200gm

...more
Sixteen Directions Homecare Pvt. Ltd.

Sidhola, Faridabad

GST 6 yrs
Stoving Thinner

88 / Litre

StateLiquid
PurityGreater Than 98%
Boiling Point56 Degree Celsius
Shelf Life12 Months
PH7-9

...more
Innotec India

Faridabad

6 yrs
Polyurethane Primers

Get Price Quote

Polyurethane Primers, Epoxy Paints, Polyurethane Paint

Diamond Paints Pvt Ltd

Badkhal, Faridabad

14 yrs
Polyurethane Primers

Get Price Quote

Polyurethane Primers, Acrylic Distemper, Decorative Paints, Epoxy Paint

The Indian Paints & Chemical Company

Jeevan Nagar, Faridabad

12 yrs
Epoxy Primer

Get Price Quote

Epoxy Primer, Polyurethane Primer, Primer, Stoving Enamel

Nav Bharat Paints

Sector 59, Faridabad

15 yrs
Primer Paint

Get Price Quote

Primer Paint, Paints, Thinner

Markk Lamb International Ltd

Ballabhgarh, Faridabad

15 yrs
Stoving Thinner

Get Price Quote

Stoving Thinner, Automotive Coatings, Epoxy Polyester Powder Coating

bestech biotech pvt ltd

Sector 7, Faridabad

10 yrs
Primer

Get Price Quote

Primer, Acrylic Paint, Thinner, Industrial Paints, Waterproof Coating

S. Vee. Chemicals

Sarurpur, Faridabad

18 yrs
Primer

Get Price Quote

Primer, Fire Retardant Pain

Navair International Limited

Ballabhgarh, Faridabad

14 yrs
Primer Paint

Get Price Quote

Primer Paint, Automotive Paint, Powder Coating Paints, Wood Seale

MAHARANI INNOVATIVE PAINTS PVT. LTD.

Sector 24, Faridabad

9 yrs
Primers

Get Price Quote

Primers, Electrostatics, Thinners, Quick Drying Paints, Puttie

PLAZA PAINTS PVT. LTD

Sector 27, Faridabad

12 yrs
Water Bases Primer

Get Price Quote

Water Bases Primer, Bitumen Primer, Instant Road Repair, Emulsio

M.k. Bitumen Products

Sector 25, Faridabad

14 yrs
Unibake Anti Corrosive Primer

Get Price Quote

Unibake Anti Corrosive Primer, Non-Stick Coating, Automotive Top Coa

Maharani Paints India Private Limited

Sector 2, Faridabad

9 yrs
Etch Primer

Get Price Quote

Etch Primer, Quick Drying Thinne

Innovators Paint Industries

Jeevan Nagar, Faridabad

9 yrs
Primer Paint

Get Price Quote

Primer Paint, Paint, Red Oxid

M/s Sunrise Paint & Chemicals

Ballabhgarh, Faridabad

14 yrs
Red Oxide Zinc Chromate Primer

Get Price Quote

We offer red oxide zinc chromate primer. Established in use under variety of conditions for many years, this is an alkyd based red oxide zinchromate with excellent corrosive properties, combined with good stability and easy application. It is used as a anticorrosive primer over steel surfaces.
...more

The Chemicals of India

Sector 27, Faridabad

22 yrs
Epoxy Primer

Get Price Quote

Epoxy Primer, Waterproofing Service, Epoxy Flooring, Coating Service

West Coast Coatings

Faridabad

1 yr
Wall Primer

Get Price Quote

Wall Primer, Wall Putty, Plaster Of Pari

Care Paints

Green Field, Faridabad

14 yrs
Epoxy Primer

Get Price Quote

Epoxy Primer, Automotive Paints Coatings, PU Paints, Paint

Hi Tech Water Proofing & Constructions

Sector 15, Faridabad

15 yrs