Bags Dealers in Kavi Nagar, Ghaziabad

Pre and Post Vacuum Sterilizer * 5 Preset Sterilization Cycles * LED Display * High density bacteria filter * Filtered water can also be used * Printer: ThermalStylus * Interface:RS232

Three Stage Operation / P 140,200,300,450 T/G Series     The P- TG series comprises of four models with firing rates from 355 to 5340 kW They have been designed for use with Light oil and all models offer three stage firing with three oil nozzles and Hydraulically controlled, rapid response air dampers which in addition to regulating the combustion air at each firing rate, close fully on burner shut down. Finger tip control enables the plant operator to select the firing rate to match his needs and the P- TG burners have been found particularly suitable for installations where the load factors vary, but are predictable.

Sai Automation make control panels are compartmentalized and custom built to meet the requirement of the industries, power plants and other engineering industries. Panels are designed for extension on either side. All the doors front & backside are designed with gasket to make panels dust & vermin proof. Constructions Generally panels are cubicle construction made of CRCA sheet. Other type of constructions are also made as per customer requirement. Cable alley in all cubicle panels has amples width and spacing so that cables can be terminated easily. Cable entry can be provided from top or bottom.     Undrilled removable cable glande plated, non magnetic gland plates are provided for cables on specific customer demand. Compartments Panels are generally in compartmentalized construction. Each compartment is provided with hinged doors. Sheet metal/Bakelite are provided between compartments, busbar chamber and cable alley. Busbar & alley Electrolytic aluminum flats/bars of E-91E and copper bar of 99.9% purity are used for bus bar. Bus bar are designed for fault level upto 50KA r.m.s. for one second. All bus bar are provided with heat shrinkable PVC Sleaves with colour coded. Bus bar supports are non hygroscopic SMC/DMC moulded and  specially designed for long distance strong enough to with stand electromechanical force during fault conditions.

Pressure vessels , crutures , mixer, feed tanks , soap filters, soap reactors, heat exchangers , condensors,tubellors,strainers ,duplex and simplex plodders, spray dryers(Chambers), cyclones, seprators, dossing tanks ,dust collectors & other equipments.MOC : STAINLESS STEEL, MILD STEEL, ALUMINIUM, COPPER et

An Auto transformer starter uses an auto transformer to reduce the voltage applied to a motor during start. The auto transformer may have a number of output taps and be set-up to provide a single stage starter, or a multistage starter. Typically, the auto transformer would have taps at 50%, 65% and 80% voltage, enabling the motor to be started at one or more of these settings. The slip ring induction motor has two distinctly separate parts, one is the stator and other is the rotor. The stator circuit is rated as same in the squirrel cage motor, but the rotor is rated in frame voltage or short circuit current. These motors are usually started with full line voltage applied across its terminals. As these motors have external resistance connected to its rotor circuit, the value of starting current is adjusted or kept minimum, by increasing the resistance of the rotor circuit. This external resistance can be assumed to be a form of rheostat, connected in star, thus kept at maximum when the motor starts and gradually cut-out as the motor gathers speed. Increasing the rotor resistance, not only reduces the rotor current, but the stator current too. This implies that the starting current of the motor is reduced when an external resistance is added in the rotor circuit. Thus because of this, the starting torque is increased due to the improvement in power factor.

The array of Female Connectors offered by us is manufactured using superior raw material and latest technology. Our products are used to to connect a threaded male connection with a Tube. We procure standard raw material to manufacture the range of connectors. Therefore, our products are widely applauded for having features like easy installation, long functional life and minimum maintenance. Specifications: Material: SS316/SS304/brass Size: 4 mm to 25 mm OD, 1/16” to 1” OD End connection: NPT/BSP/BSPT/UNF Type: Single ferrule/double ferrule

We are offering 9 watt single tube cfl lamp. we bring forth single tube cfl lamps that are manufactured using latest technology. These one single tube cfl lamps offer highly durable lighting for a longer duration without burn outs. The single tube cfl lamp serves the purpose of high luminance and prove highly economical in the long run. These single tube cfl lamps are worth using and do not burn out frequently. range watt single tube cfl lampwatt single tube cfl lamp our single tube cfl lamps demanded for excellent luminancelow power consumptionlong usable lifeless heat emission

We offer a wide range of PP FDY Yarn specially made from polypropylene raw material. Our PP FDY Yarn is particularly designed with high tenacity features. The PP FDY Yarn is fabricated with filter leaving no scope for any quality complaints.

Compact and portable. Contact Resistance Meter is meant for measurement of resistance of bus bar joints, male-female contacts of isolators, SF-6 Breaker contacts, GTS breaker contacts etc. of the sub-stations. The measurement of contact resistance is done by applying a DC current of 0-100 Amps. and measuring the voltage drop across the contacts. An ammeter and a millivoltmeter (Micro-ohmmeter) are provided measuring the current and resistance. A lamp indicates the AC supply position. A variac is provided for adjusting the output current from 0 to 100 amps. Fuse for protection against overload is incorporated. CRM Range: 0.1 micro-ohm to 19999 micro-ohm in two ranges.Input: 240 V ±10%, 50 Hz. ±5%.Output: 0-100 Amps., DC, continuously variable.

We are a leading Manufacturer & Exporter of Cymex such as Sink Mixer Wall Mounted, Sink Cock, Swan Neck Taps, Angle Cock, Angle Cock Two Way, Long Body Bib Cock and many more items from India.