Filter Regulator Dealers

We are a major Manufacturer, Exporter & Supplier of Air Filter Pressure Regulator. Our range of Air Filter Pressure Regulator includes Air Filter Pressure Regulator (JRC-4) and Air Filter Pressure Regulator (JRC-6). The Air Filter Pressure Regulator is a reliable unit designed for instrumentation. The design is especially well suited to controllers and instruments besides actuators, air cylinders, and a wide range of industrial pneumatic systems and equipment, JRC Air Set is ruggedly designed and constructed and shows excellent performance characteristics. Quality materials are used and each unit is pressure and leak tested, to ensure long and trouble free operation. Specifications Inlet Pressure : Upto 10 kg/cm2 (150 psig)Outlet Pressure : 0 to 120 psig with spring ranges of 0 to 30 psig, 0 to 60 psig and 0 to 120 psigEnd Connections : Inlet/Outlet/Gauge : 1/4" NPT (F)Filter Element : ABS plastic, 25 microns and 5 microns optionFeatures : Higher capacity and power droop, Soft seat construction in both the pressure reducing and relief sections and Aluminium and stainless steel material option. Principle Of Operation The pressure is set to a desired value by compressing the range spring by adjusting knob or screw. This causes the pin to move downwards, opening the supply valve and allowing air flow. Filtration : The air first enters the inlet port and passes through the filter element where solid particles are trapped. Water and oil particles are thrown against the inside wall of the bowl by centrifugal force. The liquid particles collect in the bottom of the bowl, which can be drained off regularly by opening the DRAIN PLUG.Regulation : The clean air passes through the supply valve and the pressure at the outlet builds up against the control diaphragm and closes the valve until the equilibrium is achieved. This equilibrium or set pressure is maintained under changes in operating conditions in the following manner.Downstream pressure drop : A drop in downstream pressure reduces the diaphragm pressure force, upsetting the equilibrium condition. This unbalance causes the supply valve to open until the pressure builds up once more to the equilibrium.Downstream pressure increase : A sudden increase in downstream pressure acts on the diaphragm, causing the relief seat in the diaphragm assembly to lift and open. The excess pressure drops almost instantaneously to the equilibrium value, at which point the relief valve closes.Changes in forward flow : Under forward flow conditions the range spring force is balanced by the diaphragm pressure force, with the supply valve open just enough to maintain the requited equilibrium output pressure. When high flow occurs, a specially designed aspirator helps maintain downstream pressure and compensates for droop. Design Features Self-relievingRugged, Corrosion - resistant ConstructionVarious output Pressure ranges availableFilter size options available to suit different applicationsSeveral mounting options including mounting bracketEconomic designMinimum moving parts Performance Features Superior regulation characteristicsLow droopExcellent stability and repeatabilityEffect of supply pressure variation is negligibleSmooth action and stable control over full rangeIdeal for instrument air pressure regulation Associated Benefits Utilizes over 36 years of engineering, design & application expertiseLong and trouble free serviceAssured product Quality Maintenance The filter element is readily accessible by removing the dripwel bowl and can be cleaned by dipping in kerosene or any similar solvent. The Airset has a drain cock at the bottom edge of the dripwell which permits drainage when the unit is mounted in vertical or panel-mounted horizontal position. J. R. Conval Engineers have been designed to give long and trouble-free service with little or no maintenance. In the event of on-site servicing a spares kit may be provided for easy replacement, reducing downtime.

5 / 2 Way Single Pilot Valve, 2 / 2 Way Direct Acting Solenoid Valv

Type : Air Filter + Regulator + Lubricator Connection : 1⁄4”, 1⁄2” and 1” BSP Body Material : Alluminium Alloy Die Cast Filter Element Material : Plastic Spring Range : 0.07 – 0.7 bar, 0.21 – 2.10 bar, 0.35 – 3.50 bar, 0.7 – 7.0 bar Gauge Range : 0 – 2.5 kg/cm2, 0.4 kg/cm2, 0 -6 Kg/cm2 Regulator Type : Relieving

We are one of the respected names in the market of Agra(India) and are offering amazing deals on our products. Our company has witness meteoric rise as Gas Pressure Filter Regulators supplier, owing to our ability to cater to bulk requirements with ease.

Saga air filter regulators are designed for highly efficient filtering and precise control of compressed air pressure. Built very compact to save space, it ensures significant saving in air consumption and uniform equipment performance.

The Marsh Bellofram Type 50/Type 50 NACE Precision Filter Air Set Regulators are reliable, precision filter air set pressure regulators, designed for instrumentation and general purpose use in both standard (Type 50) and corrosive environments (Type 50 NACE). The Type 50 NACE complies with NACE material requirement #MR-01-75 for sulfide stress cracking-resistant metallic materials for oil field equipment. The rugged design and construction of the Type 50 includes the incorporation of die cast aluminum housings that are finished with epoxy paint for added protection against scratching, weathering and other challenging environments. Careful design and use of quality materials ensure long, trouble-free operation, even in the most difficult of industrial environments. The user-adjustable Type 50 series offers superior pressure regulation vs. flow characteristics, excellent stability, repeatability and built-in filter with dripwell. A rubberized, soft-seat valve stem provides positive shut-off and “forgives” dirt or other foreign matter. An aspirator maintains downstream pressure and compensates for droop when high flow occurs. A gauge port facilitates convenient gauge installation and can be used as an additional full flow outlet. In addition, Type 50 NACE regulators include an easily serviceable and self-cleaning 316 stainless steel mesh filter that can be side, panel, pipe or through-body mounted.

Filter Regulator and Lubricator unit. Helps in removing the moisture from the air as well as maintained desired air pressure with the help of regulator and carries small droplet of oil so as to lubricate the air motor.Mandatory for air operated pump models.

Pressure regulators are the mechanical devices which are made to monitor and control the level of pressure which runs through a specific system. There are various types of pressure regulators available in the market, while some are more important for measuring water pressure and there are some others that are suitable for gas and air pressure. Pneumatic pressure regulators are mainly used in industrial sectors because they are extremely useful in different situations. When there is need of pressure regulators, most industrial companies all over the world prefer FESTO for getting the genuine products. Because they are the leader in the sphere of manufacturing of automation and pneumatic products, FESTO has been at the top of this industry since many decades. Over last several years, the pressure regulators which are designed and developed by FESTO have undergone a great change, and the latest products are known for delivering greater performance and efficiency on a various range of applications. Because of which most companies all across the globe prefer using FESTO pressure regulators for doing their various pneumatic pressure related operations. FAIZTECH TRADING is a well known pneumatics organization based in Chennai known for supplying various pneumatics and automation products for more than two decades. We have been also operating as a supplier of FESTO products in India and other parts of the world for many years. So, if you require FESTO pneumatic pressure regulators for your industries, you can get in touch with us for getting you the best FESTO products. We have an wide network of suppliers working all across India, so no matter where your industries is located, we ensure you that you can get your product at the earliest possible time. Our FESTO products will help you to save on your money and enhance your productivity, and also make sure that you can earn a better review among your customers. Kindly contact us for any machinery parts. We will deliver you within the estimated time. Product Overview Connection G1/8, G1/4, G3/8, G1/2, also available with NPT thread Size 4, 6 Flow rate 800 ... 4800 l/min Pressure gauge with bar, psi, M Pa Grade of filtration 40µm, 5µm Condensate drain a. manual b. semi automatic Plastic bowl with plastic bowl guard Metal bowl guard Flow direction a. from left to right b. from right to left Proportional lubricator. Pressure 0.3 - 7 bar, 0.5 - 12 bar Privacy Policy : We do not sell, trade or otherwise transfer to outside parties any of your personally identifiable information. We use the information to send updates about our company and projects and may contact you if requested or required. If you dont want to be on our mailing list, You can opt out any time by contacting us on 044-2848 4874 or by clicking on the 'unsubscribe link' mentioned in our email. If you have any questions or concerns about our privacy policy or data processing. Please contact us. We may update this policy time to time. Readmore...

Made As per ISO specification. Regulator fitted with 'Rolling Diaphragm' to give quick response. Semi-Automatic drain removal as STD features. (Automatic Drain Optional) Built in gauge is provided with an option of connecting it to ext gauge. Easy bowl removal refixing by 90� turn of bowl. Lockable safety knob provided with regulator.

the company is counted amidst the leading manufacturers, exporters and suppliers of pneumatic filter regulator. The pneumatic filter regulator offered by us is designed and manufactured to meet several instrumentation requirements. The special unique valve design as well as the large ratio of diaphragm to valve area leads to a reliable and efficient performance. Further, this pneumatic filter regulator resists corrosive and chemical atmosphere because of the metal bowl placed at the combination unit. Durable, high strength and dimensionally accurate pneumatic filter regulator can be availed from us in different specifications.    features : shavos fitter regulator combination unit offers extremely precise control available in 14' & 12" specially designed to meet instrumentation requirements unique valve design and large ratio of diaphragm to valve area affords highly sensitive performance also available as pressure regulator only metal bowl on combination unit resists corrosive and chemical atmosphere

We are offering instrument filter regulator. Airmatic fr 67 series service : gases or compressed air filter-regulator sizes: 6 mm (g 14", 14"npt) flow: up to 40 scfm compact in size, suitable for oem applications high flow capacity with minimum pressure drop. High performance over wide flow range application: pilot controllers, valve positioners, pneumatic instruments