AC Controllers Dealers

Solar Pump Controller Unique Features No Grid Power Required One Time Low Investment MPPT + VFD Technology Zero Maintenance Use Existing AC Pump 9 Easy to Install No Battery Bank Required

2 A/C CONTROLLER is provided with independent power supply for each AC. Controller can work with any one or both power supplies. Under normal working condition at Power, depending on the Room Temperature & Set points IDFAN1 & ODFAN1 will be started after Fan Startup Delays. Compressor will be On after Cp1 Startup Delay & after Startup Delays of IDFAN2 , ODFAN2 .Cp2 will be started if required ( depending on room temperature ).If a fault occurs then ALARM indication on the front panel will be ON & the fault is displayed in the fault status also fault is stored in the Fault log history.  

We are offering solar ac pump controller. Special attraction of our solar ac water pumping system: dual mode operation: can be operating on electric power at night and solar power at day time. Inbuilt mppt tracking facility to get maximum power output from the solar array. Higher efficiency higher life cycle sensor less dry running protection higher temperature protection reverse polarity protection tank over flow protection over voltage protection under voltage protection over load protection high durable and reliable component of solar ac water pumping system solar panel: iec 61215 & iec 61730 certified solar panels with 35 year life. Ac motor + pump: high life cycle pump with high efficiency and better discharge. Solar ac pump controller: transformer less high efficient and micro controller based pump inverter. Module mounting structure: galvanized iron mounting structure with dual axis manualauto tracking facilities for long time operation in a day. Accessories: cable, connectors, pipe and other accessories. Note: for best competitive solution for your required solar water pumping system following details should be given. Pump setting depth (in metersfeet). Requirement of daily water (in littersgallon). Site location of solar water pumps installation. Advantages irrigation possible at remote locations environment friendly operations conventional grid electricity is not required highly reliable and durable ac high efficient motor + pump eco-friendly (zero noise pollution -zero co2 emission ) complete independence from grid connection for water supply 25 years power output warranty on the solar panels no fuel required almost no maintenance required provide consistent water solar pv arrayit consists of an array of solar panels connected in series and parallel combination to achieve the desired voltage and current necessary to drive the ac pump. The power rating of the solar array will be suitable to the design of the pump. Conventional ac 3 phase motor & pumpac pumps are conventional pumps that are currently in use across the world for various applications. Currently these pumps run on ac power from the grid (batter overall efficiency of the pumpset will lead to reduce the number of solar panel) solar ac pump controller with inbuilt mppt function (solar ac pump inverter)a transformer less inverter system, 415 vac 3-phase output voltage and vf control to manage pump starting condition (soft start). The equipment is micro controller based and operated with software for digital control of inverter parameters, fault finding diagnostics and digital io signalling. With the inbuilt mppt (maximum power point tracking) function, it regulates the output frequency according to irradiation in real time to achieve the maximum power. Adopting the proposed dynamic vi maximum power point tracking (mppt) control method, fast response and stable operation can be possible, better than the conventional methods, it can overcome the problems including poor tracking performance, unstable or even cause water hammer damaging when the irradiation on the array changes rapidly. Mounting structure galvanized iron dual axis manual tracking structure will ensure the long time hassle free operation. Optionally we will provide auto tracking or fix tilt tracking. Accessories hdpegi isi standard pipe for higher strength and easy installation with higher life expectation. Isi standard copper cable to ensure fire proof operation.

The HT Solar Pump Controller is designed to run any Electric three phase submersible pumpmotor. That includes synchronous motors The HT Solar provides water in remote location by converting high voltage direct current (DC) from a solar panel into alternating current (AC) to run a standard AC Submersible motor.

Solar ac pump controller for the customers that are inclusive of the Solar DC Pumps which have a very robust make and they have been priced at very reasonable rates in the market and offer a long lasting functioning to the customers. These pumps are used for transferring various kinds of fluids and they offer a high performance to the customers and have been reasonably priced.

The Curtis Model 1222 is an AC induction motor controller for ‘steer by wire’ electric power steering systems. In these systems, the steering motor functions as an actuator to change the angle of the vehicle’s steered wheel(s) and so change the direction of travel. The Model 1222 performs as the steering system controller, interpreting the steering command input and wheel position feedback, then driving the steering motor to move the steered wheel to the desired position.AC induction gearmotors. Intended applications are materials handling vehicles such as reach trucks, order pickers, stackers, ‘man up’ warehouse trucks and other similar industrial vehicles.

We are offering packaged ac controller. application these temperature controllers are used for packaged air-conditioners and other air-conditioning applications. installation these should be installed in a place which is free of vibrations, water and corrosive gases or vapours and where the ambient temperature does not surpass the value indicated in the technical specification

Step data input type, programless type, programless controller, step motor driver, step motor controller, fieldbus compatible gateway. Ac servo motor controller

ABB AC Drive ASC55 Ensure speed and control features in a variety of your low power applications such as automatic gate, solar trackers, treadmills and whirlpool baths. ACS55 is easy to set up and commission, the design focus of the ACS55 is on easy integration into machines, with flexible mounting alternatives. The DriveConfig kit option allows set up without a power connection to the drive. It’s also ready to go for commercial and domestic environments. The DriveConfig kit is a PC tool for programming and control of ACS55 drives that need more functionality. The kit enables parameter setting and software updating without the need for a power connection. The drives can even remain in their delivery boxes during configuration which means no need for a safe area.The DriveConfig kit features online drive control and monitoring of up to four signals simultaneously. Together with the ACS55 drives series, the DriveConfig kit helps save time by ensuring fast setup, accurate parameter settings and reliable operation.

This Controller for Roof Mounted AC Package Unit of LHB Coaches and Double Decker Coaches is a Microcontroller based unit developed to control the sub-systems  of the RMPU automatically according to the Heating, Ventilation and Air-Conditioning (HVAC) algorithm to provide accurate control thus resulting in  comfort  to  passengers RDSO Specification: RDSO/PE/SPEC/AC/0139-2009 REV.1Approved by RDSO (Research Designs & Standards organization),  Ministry of Railways,Govt. of India.