Pressure Controllers Dealers

Application:   Designed for automatic supply of water to one or more outletsFeatures and Benefits:   Pressure control for constant water pressure and dry running incase of no water in the pipe line. This controls pump operation, automatically and without interruption, with constant pressure and delivery during supply from one or more distribution points. If there is no water at the suction point it blocks the pump, without using level probes or float switches   Pressure control for constant water pressure and dry running incase of no water in the pipe line. This controls pump operation, automatically and without interruption, with constant pressure and delivery during supply from one or more distribution points. If there is no water at the suction point it blocks the pump, without using level probes or float switches

The Series DH Digihelic® Differential Pressure Controller is a 3 in 1 instrument possessing a digital display gage, control relay switches, and a transmitter with current output. Combining these 3 features allows the reduction of several instruments with one product, saving inventory, installation time and money. The Digihelic® controller is the ideal instrument for pressure, velocity and flow applications, achieving a 0.5% full scale accuracy on ranges from 0.25 to 100 in. w.c. The Digihelic® controller allows the selection of pressure, velocity or volumetric flow operation in several commonly used engineering units. Two SPDT control relays with adjustable dead bands are provided along with a scalable 4-20 mA process output. In velocity of flow modes, a square root output is provided on the 4-20 mA signal to coincide with the actual flow curve. The Series DH provides extreme flexibility in power usage by allowing 120220 VAC and also 24 VDC power which is often used in control panels. Programming is easy using the menu key to access 5 simplified menus which provide access to: security level; selection of pressure, velocity or flow operation; selection of engineering units; K-factor for use with flow sensors; rectangular or circular duct for inputting area in flow applications; set point control or set point and alarm operation; alarm operation as a high, low or highlow alarm; automatic or manual alarm reset; alarm delay; view peak and valley process readings; digital damping for smoothing erratic process applications; scaling the 4-20 mA process output to fit your application's range; Modbus® communications; and field calibration. With all this packed into one product it is easy to see why the Digihelic® controller is the only instrument you will need for all your pressure applications.

Pressure Indicator : Accepts 4-20mA from pressure transmitter & displays pressure. Pressure Controller : Accepts 4-20mA from pressure transmitter, displays pressure and gives a relay o/p.   Specifications   4 3-1/2" Digit LED Display 4 I/P 4-20 mA 4 Works on 230V AC Mains 4 Generates 24V DC supply 4 Displays pressure upto 1000 bar 4 Single relay or Double relay o/p (Controller Only)  

The product can substitute the parts in automatic water pump with complex structure controlled by traditional machinery switch (Such as pressure gauge, pressure switch, T - valve, check valve and pressure tank). It is featured with steady performance, low maintenance cost, long service life and convenient installation. When the green “Power on” power supply indicator light flashes, it means the power supply is connected. When the yellow “Pump on” light flashes, it means the water pump has been started. When the water pump continuously runs, the pressure in pipeline system will rise and when the required pressure of the equipment is reached for several seconds, the water pump stops working. In case this process can not make the pressure in pipeline reach the required pressure of the equipment, the red light “Failure” will flash. Under this situation, press “Restart” button and keep it, and wait for the pressure in pipeline reaching the required pressure of the equipment, then the red light will be off. Release the button and close the water tap. The product stays in normal standby state and keeps the pipeline system in water supply state with a constant pressure.

Aerosense differential pressure controller it is recommended that industrialists dealing in the domain of pressure control & temperature drift should make the selection of the all new range of aerosense differential pressure controller. The device is a type of differential pressure indicator that comes with advanced & standard accessory items. It is also enabled with the zero point adjustment facility and high point adjustment (span) that is provided to deliver the excellent results as per the desired levels of quality in hvac, fan & blower industries. Features: better accuracy highest pressure range protection standard conformance

Features Part of Beamex Integrated Calibration Solution or a stand-alone pressure controller Automatic pressure calibrations Portable or bench mounted Output range: from vacuum to 70 bar (1015 psi) Precision: < 0.015 % FS 1 year uncertainty: < 0.025 % FS Supported user interface languages: English, German, French, Spanish, Italian, Chinese, Russian, Japanese, Polish, Portugese, Korean

  PRC has designed & developed a complete solution for heavy presses (Pneumatic) manufacturers & users for their pressure controlling problems. It is very challenging to maintain predetermined pressure in the presses to produce a good quality product. Many times product is rejected due to increase or decrease in pressure which costs to manufacturer very high.   Independent electronic module for die cushion & counter balance Due to manually controlled pressure by regulator of cushion & counter balance the following drawbacks has removed by using above automatic pressure controlling system. Cushion Production Was Less (Due To High Pressure Setting Time) Production Rejection Was High (Due To Not Exact Setting Of Pressure As Components Were Required. Hard In Machining. (High Cushion Impact On Slide, Due To High Cushion Pressure) Not Proper Shape Of Component. (Due To Less Cushion Pressure) Counter balance Motor Taking High Current When Balance Pressure of Counter Is High. Motor Taking High Current When Balance Pressure of Counter Is Low. Slide Coming Down May Cause Of Accident, Due To Not Proper Counter Balance Pressure As Per Slide And Die Weight. Automatic pressure controller Easy To Set Pressure for both Cushion And Counter Balance. Set Both Pressure as Per Component’s Requirement Once And Forget It. High Production and No Rejection. Less Power Consumption. Improve Product Quality And Do Safe Production. Features: Designed to suit the Indian environmental conditions Inexpensive in comparison to other solutions Precision & accurate pressure setting Wide application range Reliable & dependable User friendly with standard warranty Customized solutions available Standard Specifications:   Application- Suitable for presses (Die Cushion & Counter Balance) Display- Two 20 x 4 lines LCD with back light. Analog Input- Two Analog inputs for Strain Gauge type Pressure Transducer. Digital Inputs- 8 Digital Inputs. Outputs- 8 Relay outputs for Machine operation. Function mode- Auto & Manual. Calibration- Simple calibration procedure for Pressure Transducer. Keypad- 4 keys to enter parameters & operation control. Indication- LED For (Pressure – Fill, Pressure – Ok & Pressure – Exit). Buzzer- For low & High Pressure status. Settable parameters- Air low & High Limits. Controller- Two independent controllers for Cushion & Counter Balance.

We have available following Ships spareparts for Sale: Product-Pressure Controller Product-Nakakita Seisakusho Type-NS-PS-732 Sr no-32K410 Date-23-3-82 If any requirement then please contact us on +91 97279 70078. 

ACE INSTRUMENTS make Digital Differential Pressure Controller are digital readout differential pressure monitors designed for measuring the room pressure inside Pharma clean rooms, hospital operation theater & isolation rooms. Digital Differential Pressure Controller are part replacement for the analog differential pressure controller & are easy to read with crystal clear 4 digit LED Display. It comes with built in sensor & also a buzzer alarm with acknowledgement facility for process violation alert in case of room pressure exceeding set limits. Salient features: Include Unit Conversion at the press of a key between mm.W.C. & Pascals, integrated buzzer alarm for set point violation alert, analog 4-20 mA Output,30 mm. Depth for easy fitment into Modular Wall or brick wall (with an overall wall grouting box) & RS 485 Modbus communication for BMS/SCADA/PLC integration.

Product Details: Valve mounted, Compact and simple pressure control system Output air pressure upto 3 Kg/Cm2 hence valve positioner not required Can be used directly for pressure reduction or as overflow system. No additional instruments required Totally mechanical, very easy to maintain in-house No electronics, hence not affected by ambient temperature All materials includes sensing bellow are cast AL and SS hence corrosion resistant Can be used with any control valves with any Pneumatic Actuator Very little air consumption

The Series A4 digital differential pressure controller is a patent pending microprocessor based pressure controller for positive, negative, and differential pressure as well as velocity and flow. The Series A4 differential pressure controller includes (2) 8A SPDT relays, and an optional digitally scalable 4-20 mA output. The programmable control allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user-friendly menu on the OLED display or with an Opti Link™ programming key. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate user preferences. Compared to other mechanical products, the Series A4 digital differential pressure controller has a significantly reduced depth, an improved look, and better performance. Techinical Specification Maximum Pressure: Ranges -00 to -05 = 2 PSI (13.8 kPa) Ranges -06 to -14 = 10 PSI (68.9 kPa)Media Compatibility: Air and compatible non-combustible, non-corrosive gassesAccuracy: 1.0%, 0.5% or 0.25%Temperature Ranges: Compensated and Operating: -10° to 140°F (-23° to 60°C)Thermal Effect: +/- 0.02% FS/°FOutput Signal: 4-20 mA (option)Loop Resistance: 750 Ω Max (for internally sourced power); 1800 Ω Max (for externally sourced power of 36 VDCPower Supply: Universal 24-240 VAC or VDCHousing Material: Glass Filled NylonEnclosure Rating: Designed to meet NEMA 4X (IP 65) face; with optional cover the entire product is weatherproofRelays:  (2) SPDT 8 Amps @ 250 VAC, 5A @30 VDCElectrical Connections: screw terminalsResponse Time: Display: 4 Digit, red LED, ½” (12.7 mm) digits; OLED programming displayProcess Connections: Push on connection for 3/16” (5 mm) tubingAgency Approvals: ETL, CE

The Electronic Pressure Controllers, which we deliver, have maximum working presure of 10Bar. Owing to our speedy distribution network, we are capable to render quickly and hassle free deliveries. For ensuring safety of the products during handling, warehousing and transportation, we make use of quality packing material. Moreover, the task of packaging is undertaken by the experts.

GDS Instruments Pressure Volume Controllers are general-purpose water pressure source and volume change gauges for the precise regulation and measurement of fluid pressure and volume change. Pressure applications from 0 up to 100MPa of wateroilair, with accurate measurement of volume change, all of which are capable of being logged and controlled by PC. The Enterprise Level PressureVolume Controller (ELDPC) is aimed at commercial testing (max 1MPa). The Standard PressureVolume Controller (STDDPC) is aimed at medium pressure commercial testing (