Cranes Dealers

We design and manufacture Gantry cranes as per our customer requirement for various industrial applications like shipping, construction, power, material handling, water gate handling, etc. Depending on the capacity & application, we design these cranes as single girder or double girder and also as per the requirements of our customers. Construction sites Ports and harbors Workshops where existing columns cannot bear the wheel loads of a bridge crane Workshops with low roof tie height that might restrict the height of lift of a regular bridge crane Locations where bay lengths are excessive Locations where bay lengths do not remain constant Sites / projects where the crane itself needs to be relocated from one place to another Locations where loads are to be shifted from points outside the crane span as in the case of an overhang on either side of the rails

Single Girder Cranes are generally used in production units and warehouses where space maybe a constraint. These overhead or under slung cranes can be fitted across different floor areas according to the need of productivity. Shivpra’s single girder cranes offer the following advantages: Cost effective solutions for optimum utilization of space. Light weight and compact construction. High stability and very low dead weight. Low load on the crane runway and the building structure. Maximum hook approach.

We are offering tower hoist model : make : ace type : 4 channel channel size : 100 x 50mm angle size : 40 x 5mm bucket capacity : 750 kg. Supplied along with winch, isi wire rope (10mm) maximum height 60 ft maximum height 100 ft maximum height 200 ft

It is a special purpose EOT Crane generally used in flameproof zones/areas. The machinery used for these cranes are flameproof machinery like flameproof Motors, Brakes, Panels suitable to Gas group IIA & IIB, Fire retardant cables, etc. The Indian standard for the FLP EOT crane is IS3177 & IS2148.

Mini Crane is used in the construction and engineering industries for lifting various objects from one place to another. Mini Crane that we offer is easy-to-operate and can be rotated in any direction at 360 degrees. Our Mini Crane is electrically operated and known for its sturdy construction, high-speed performance and longer service life.

The EOT Crane is a material handling equipment. We manufacture EOT Cranes of capacity of 1 Ton to 50 Tons. Also we manufacture crab assembly /electric hoists/end carriers/jib cranes/gantry crane etc. separately. Over the years, the success of the company is based on customer satisfaction and hence our skilled team of experts ensures best raw material is used in the production of EOT Crane. Manufactured With : MS/EN8 ETC Model : Overhead EOT CranesHOT CranesGantry CranesElectrical wire rope HoistsJib CranesSingle & Double girder EOT cranes Industries Where It Is Used : Power projectsChemical plantsSteel Plants and more Features : Maintenance freeGood qualitySafeEasy to handleEconomicalRobust

• classification according to en12999 h1/b2. • load holding safety valves on all cylinders. • full warranty of 12 months and a warranty of 36 months on all load-bearing parts. • ktl protection to ensure painting will sustain longer. • use of high tensile steel to reduce dead weight. • slewing angle 400 degrees. • hour counter with indication of service intervals. • lever control on then both sides of cranes.

    Heavy-duty transmission specifically designed for crane application. Specifications Heavy Duty Winch Motor for hoisting Articulated chassis for short turning radius Specifically built long chassis for more reliability. 2 part telescopic boom hydraulically extendable for more outreach and high lift. Specifications Boom Telescoping Heavy duty, two part box type hydraulically operated. Derricking Through double acting jacks Hoist Mechanism Four falls, hydraulic winch Rope diameter 12 mm Track Front 2190 mm (center of twin wheels) Rear 1850mm (center of wheels) Tyres Front 10.00 X 20 – 16 PR (Four Nos.) Rear 16.90 X 28 – 12 PR (Two Nos.) Transmission Clutch Single plate, heavy duty dry friction type clutch plate specially designed for crane application. Rear 16.90 X 28 – 12 PR (Two Nos.) Speed Travel speed 25 Km/h – restricted as per safety norms (without load) Type Heavy-duty transmission developed specially for crane application. Sliding mesh, spur teeth gearbox. 4 forwards and reverse speeds, with high & low selector lever. Brakes Front wheel Hydraulic brakes. Rear wheel Hydraulic breakes. Speed Travel speed 25 Km/h – restricted as per safety norms (without load) Parking Mechanically actuated at rear wheels. Operation Timings (No load at rated engine rpm) Boom Raising 24 secs Boom Lowering 20 secs Telescoping Extension in 14 secs Telescoping Extension out 20 secs Steering (lock to lock) 10 secs Hoist line speed 12 m/min Telescoping Extension out 20 secs Capacities Hydraulic tank 130 ltrs Fuel tank 90 ltrs Engine Kirloskar Engine, water cooled diesel engine Rated power for crane 76 bhp @ 2200 rpm or equivalent engine. Hydraulic system Pump Vane type hydraulic pump Control Valve 4 spool control valve with built-in pressure relief valve Hydraulic Filter Suction line has a 100-mesh inline strainer, while return line has 25-micron full flow filter Electrical system 12V single battery, negative earth Standard Accessories All Weather Cabin FrontBumper Stop, Tail, Turn & Reverse Lamp Toolkit Reflectors  

We are one of the leading manufacturers,exporters and suppliers of tower crane, construction machinery. Tower cranes are a common fixture at any major construction site. The construction crew uses the tower crane to lift steel, concrete, large tools like acetylene torches and generators, and a wide variety of other building materials.

Finally, find a crane that meets your most exacting requirements whether it be hoisting capacity, chassis variety, operating system or crane operators’ cabin adaptation for different climatic conditions, etc.

Tower Cranes of Buildmate are easy to maintain and keep in excellent condition. We assure that our product would deliver peak performance and therefore, useful to save recurring cost. We became one of the largest Crane manufacturing companies in the country with clients from all the major cities.

We are offering Mini Crane. Model no. JKmini 150 JKmini 300 JKmini 500 JKmini 1000 Capacity 150 Kg 300 Kg 500 Kg 1 Ton Height 30 - 60 Mtrs 30 - 120 Mtrs 30 - 120 Mtrs 30 - 150 Mtrs Boom Length 6.5 Ft 6.5 Ft 6.5 Ft 7Ft Rotation 3600 3600 3600 3600 Prime 2 HP 3 HP 5 HP 7.5 HP Mover Crompton MotorCrompton Motor Crompton Motor Crompton Motor Wire Rope 8 mm 10 mm 10 mm 12 mm Bucket L 645 x W 645 L 750 x W 750 L 920 x W 920 L 1035 x W 1035 Size x H 272 mm xH 342 mm x H 423 mm x H 560 mm Bucket Volume 60 Litres 120 Litres 225 Litres 415 Litres Overall L 3450 x W 685 L 3785 x W 685 L 4673 x W 762 L 5614 x W 813 Dimensions x H 1828 mm x H 1980 mm x H 1980 mm x H 1980 mm Weight 350 kg 480 kg 700 kg 950 kg.

Hydraulic Truck Cranes, Terrain Cranes, Crawler Cran

Pedestal Cranes, Single Girder Underslung Crane, Digital Crane Scal