Plate Load Test Equipment Dealers in Hyderabad (25 products available)

• Material: Steel
• Operating Temperature: - 60 - 320 deg C
• Automation Grade: Semi-Automatic
• Frequency: 35 Hz
• Usage: Laboratory
• Warranty: 1 Year

Sand Pouring Cylinder (Sand Replacement Method) as per IS : 2720 (Part XXVIII) 100mm dia. consists of cylinder calibrating container, metal tray with 100 mm dia hole in the centre.

This apparatus is useful for determining the harden ability of steels by end quench test. The test consists of heating a standard size specimen to a given temperature for a specific period of time, followed by a water quenching of one end under specified conditions and measuring the hardness at various points from quenched end along the length of test piece. After heating, the test specimen is kept on the specimen support, where it is automatically centered with respect to water jet. The quick action valve starts impinging the water jet on the specimen end instantly. The elaborate arrangement of pump, tank, pipe etc, enables to obtain desired correct water head for the nozzle. The electrical controls and safety devices for pump and motor are provided and the entire apparatus is totally enclosed. Test piece - Total length is 100 ± 0.5 mm & diameter is 25 (+0.5 ; -0.0) mm. Inside diameter of vertical water supply pipe 12.5 ± 0.5 mm. Height of the free water jet (without test piece in position) 65 ± 10 mm. Distance from Tip of nozzle to the bottom of test piece 12.5 ± 0.5 mm. This apparatus conform to IS:3848-1981 & ASTM : A 255.

• Features: Dimensional accuracy. Reliable operations. Longer service life. Compressive strength, Penetration resistance.

• Weight: Standardized
• Size: Standardized
• Specification: It consists of a vertical pillar mounted on a base provided with leveling screws.
• Accessories: Penetration cone for empirical estimation of penetration of lubricating grease, petroleum jelly etc.

• Country of Origin: Made in India
• Material: Stainless Steel
• Usage/Application: Industrial
• Color: Silver
• Weight: 1.2 kg
• Width: 84 mm
• Base Material: Wooden

• Brand Name: Dwaraka Scientifics
• Material: SS
• Voltage: 220 V
• Usage/Application: Laboratory
• Packaging Type: Wooden Box
• Capacity: 2-3 L
• Display Type: Digital
• Frequency: 50 Hz

• Type: : Batch Mixer.
• Model: : SM 30 / C,SM 30 / S, SM 30 / D
• Capacity: : 30 Kg / Batch.
• Connected Main Motor: : 5.5 kw / 7.5 HP.
• Silicate Feed by: : C. I. Geared Pump.
• Pump Motor For No-Bake: : Pump for Resin: 0.25 kw / 0.33   HP Magnet coupled C. I. Geared   Pump. Pump for Hardener: 0.18   kw / 0.25 HP Magnet Coupled SS   316 L Geared Pump.
• Control Panel: : PLC controlled with Two Program   loaded complete for two   selections either silicate or No-   bake what ever you want.

Super Mixer (Spherical Bowl Mixer) is unlike conventional mixer-Muller for No-bake and silicate sand mixing. This Mixer consists mainly of a newly developed mixer Bowl. The mixer has a spherical construction with specially designed high-speed two action blades, which gives three-dimensional movement for thorough mixing of sand with silicate, organic binder or catalyst in any combination in just 15 to 18 sec. Models available for chemically bonded sand/silicate sand and dual capability. Complete mixing in short time and uses lesser amount ofbinders. If in your conventional mixer using 5% silicate, weensure you that at list 1% of silicate you can save in our mixer. Due to three-dimensional mixing at high speed, no unmixedsilicate balls are there. And cause of that you can get goodsurface finishing of casting and save fettling cost indirectly. Cleaning can be easily done since sand does not remaining inthe mixer bowl due to bottom discharge. Compactly designed, molding sand can be accuratelysupplied at any time without waste, due to lower batchcapacity 15 kg to 30 kg. It is not possible in conventional mixer. Weighing and mixing of material are automatically controlledfor rationalization of work. Due to automation only one switchoperation is there, so only one person or molder can operatemixer whenever needed. Result of this process leads to manpower saving. Although it is of small sized model; its capacity is comparableto large sized mixer when operated continuously. Breakdown is minimized and maintenance is easy due toSturdy and compact design. No need of major civil work orspace. Can be use as Core Sand Mixture.

automatic test equipment, PIC24F Development Board, Cable Assembly

The Bulk Density Tester, Scott Volumeter, is described in USP Chapter Method 2 is designed for measuring the bulk density of fine powder and similar products. This Apparatus PEP-S-304 is used to determine apparent density of microcrystalline cellulose. The upper funnel contains a 1018 mesh wire support and uses a cylindrical or square 25.00ml 35.00ml+- 0.05ml stainless steel density cup.

Shear Tester, vibrating equipment, Capacitor tester

bitumen testing equipment, Cement Testing Equipment, Ndt Equipments

automatic test equipment, X-Ray Machines, radiography equipment

Plate Load Test Equipment, Soil Resistivity Test, Seismic Refraction Test

Deep Freezers, portable blood bank refrigerator, Laboratory Refrigerator

soil testing equipments, Material Testing Machine, s microscope

COD Digesters, Laboratory Vacuum Oven, Calorimeters, Humidity Oven

Falling Weight Deflectometer, Frequency Response Analyzer, Gm Counter

Density Meter, Altimeter, Defibrillator, Ultrasonic clamp on Type flow meter

Soil Compaction Meter, weather monitoring station, water activity analyzers

soil testing equipments, Aggregate Testing Machine, Material Testing Machines

Soil Testing Equipment

Sampling Auger