Temperature Meter Dealers in Hyderabad (11 products available)

Owing to our immense expertise in this domain, we have carved a niche as a Supplier of pH-mV Temperature Meter in the market. Our pool of veteran professionals makes certain that the quality of all products is superior and exceptional.   Features : Multi functions : pH, mV, Temp Automatic/manual temp. compensation Built in analog output terminal mV function for ion-selective, ORP and other precise mV measurement Specifications : Sampling Time : Approx. 0.4 second Operating Temp. : 0 to 50(32 to 122) Large size : 18 mm LCD display Operating Humidity : Less than 80% RH Calibration Knob : External PH 4 (Slope adj.) & pH 7 (Cal. adj.) Power Supply : 006P DC 9V battery Power Consumption : Approx. 2.7 mA Dimension : 160 x 80 x 35 mm, (6.3 x 3.2 x 1.4 inch) Weight : 250 g/0.55 LB (including battery) pH electrode (Optional) : Any connector pH Electrode with BNC connector Standard Accessories : Instruction Manual 1 PC Optional Accessories : pH electrode, ATC Temp. probe

• Application: Agriculture, Meteorology
• Weight: 230
• Country of Origin: India
• Display: No
• Brand: AETHER Techno Solutions
• Material: Plastic
• Type: PT100
• Color: Black/White
• Warranty: 1 year

Even in energy sector when calculating peak load it is crucial to estimate the effect of climate conditions. Many peak load forecasting approaches are based on temperature, relative humidity and wind velocity etc. Humidity also influences plant diseases, especially fungi and molds that grow and spread rapidly when humidity is high.IRH 01 is a capacitive humidity sensor with a polymer dielectric which absorbs or release water proportional to relative humidity which changes the capacitance of the capacitor which can be measured with a electronic circuit.The IRH01 is very compact as ADC, signal amplifier, calibration data memory is all on a single chip. The filter cap protects the sensor for water dust and other contaminations. Sensor is protected by a solar radiation shield which protects the sensor from radiated and reflected heat also.IRH01 is directly compatible with IDL-M and IDL-A. Sensor is compatible with davis Vantage pro series weather stations also.Product HighlightsTemperature, HumidityCompact DesignPowder Coated Anodized Aluminum ConstructionDigital and Analog OutputsEasy installation     Temperature Sensor General Specification  Sensor: SHT11 by Sensiron  Temperature Measurement Range: -40°C to +60°C  Temperature Measurement Resolution: 0.01  Temperature Measurement Accuracy: ±0.5°C  Temperature Accuracy:  Operating Temperature: -40 °C to +123°C  Storage Temperature: -40°C to +80°C  Probe Length: 7.1 cm (2.8 in.)  Probe Body Diameter: 1.2 cm (0.47 in.)  Filter: 0.2 Μ Teflon membrane  Filter Diameter: 1.2 cm (0.47 in.)  Housing Material: Rediation Sheild of UV Resistant ABS plastic,Powder Coated Mouunting Structure  Power Consumption: 0.5 mA  Supply Voltage: 2.4V to 5.5V VDC  Settling Time after power is switched on: 30 Sec with Teflon Filter and 1 Sec wth Nylon Filter Relative Humidity Sensor  Sensor: SHT11 by Sensiron  Relative Humidity Measurement Range: 0 to 98% non-condensing  RH Output Signal Range: 0 to 1.0 VDC  Accuracy at 25°C:±3% RH (0 to 90% Relative Humidity)±5% RH (90 to 98% Relative Humidity)  

Air temperature and infrared surface temperature, 2 channel; measuring range(infrared): -30 . 300°c,,d:s ratio : 6:1, resolution: 0.1°c,accuracy: +-2.0 °c (-30..+100 °c) +- 2% of m.v. (remianing range),measuring range(air temp) : -10 ... 50°c,resolution: 0.1°c,accuracy: +- 0.5 °c, including calibration protocol,protective cap, wrist strap, belt holder,batteries

Item Code:CR120-FLP Available with remote RH+Temperature Sensor in FLP Enclosure 21 CFR Part 11 compliant Display RH, Differential Pressure & Temperature High Accuracy Input Compatible with most RH Sensors, PT100 & 0-10V & 4-20mA Transmitters Hi & Lo Alarm Annunciation for each channel Software calibration with record 24 V DC operation SCADA interface through RS 485 MODBUS Communication Programmable Units: %RH, Dew Point, C, F Pa and mmWC OPTIONS: Built in Synchronised Clock, Max/Min Record with Time Stamp

  Fluke 971 Temperature Humidity Meter maintains optimal comfort levels and good indoor air quality. It quickly and conveniently take accurate humidity and temperature readings. The Fluke 971 is invaluable for facility maintenance and utility technicians, HVAC-service contractors, and specialists who assess indoor air quality (IAQ). The Fluke Model 971 (hereafter referred to as “the Meter” is a battery powered meter that measures relative humidity and temperature. Through a few easy to use controls, the Meter displays three different temperature points of the air surrounding the meter’s sensor: ambient, wet bulb, and dew point.  

Manufacturer：LIANGONG Equipment Type：CDW-40 Temperature Impact Test Meter Ⅱ Model: CDW-40 Ⅲ Usages and characteristics:   CDW-40-type low-temperature impact testing meter is the compressor refrigeration of the latest research and development in accordance with cooling requirement of GB229-2007 "metal Charpy notched impact test method". This equipment used refrigeration compressor technology, the use of the principle of heat balance and mixing method of circulation to achieve uniformity of the sample auto-cooling and temperature, to fully meet the temperature indicators of national standard GB229-2007 of the provisions. The equipment is simple, convenient and efficient for working, which is the ideal equipment of specimen cooling and insulation for low-temperature impact testing. At the same time, it can also be used for other low-temperature detection and testing.       Ⅳ Main technical parameters  1 Temperature range: room temperature ~ -40 ℃ (≤ 25 ℃) 2. Temperature accuracy: ± 0.5 ℃ 3. Cooling speed: room temperature ~ 0 ℃ about 1.2 ℃ / min                                              0 ℃ ~ -20 ℃ about 1.0 ℃ / min                                            -20 ℃ ~ -40 ℃ about 0.5 ℃ / min 4. Maximum dimension of the external form: 910 × 510 × 920mm (length × width× height) 5. The effective dimensions of the studio: 275× 160 × 120mm (length × width × height) 6. Quantity of sample can be loaded: > 60 (the impact of sample size: 10 × 10 × 55mm) 7. Digital timer: 1minute ~ 9999 minutes, 1 minute resolution 8. Cooling medium: ethanol or other ice-free liquid 9. Stirring motor: 23W 10. Working power: 220V ~ 240V, 50Hz, 1.8kW 11. Operating environment temperature : 5℃~25 ℃        ⅤEquipment configuration     1. One host 2. One compressor 3. One transducer 4. Three sample baskets    

• Size: 96*96 Mm
• Display: 4-digit,7-segment display
• Color: Black
• Features: Perfect finish, Easy to use, Low maintenance
• Item Code: HPMTM
• Temperature Accuracy: 0 to 100 Degree C

We are offering non contact temperature meter measuring range : -30 to +600 °c,accuracy : ±1°c or 1% of mv (0 to +600 °c),resolution : 0.1 °c,d:s ratio : 50:1,emissivity : adjustable (20 data emissivity table), 4-point laser sighting, adjustable limit values, alarm function, connection of external probes (k type -50 to +600 °c) , measurement data adminstration (200 data storage), pc software, incl. Batteries and calibration protocol

Portable digital temperature indicator, analog thermometer, Temperature Logger

Lab Equipments, center free plant growth chambers

digital temperature meter, Temperature Indicator