Ultrasonic Flow Meters Dealers in Hyderabad

Monitoring flow of fluids or gases within the line in any process industry is a very tedious and a monotonous task. Triton provides you the solution to ease your job using its Clamp-on Ultrasonic flowmeters which easily gets clamped on the pipe and through minute adjustments you can get readings with ±1% accuracy. Clamp on ultrasonic flowmeters are easy to carry, use and have high repeatability of 0.5%. Just clamp it to the line whose flow is to be measured and get the readings on the meter display. These find wide application in validation, auditing and preventive maintenance. Ultrasonic flowmeters works on the principle of Transit time and have high precision from line size 3/4 “ to 240”. These are applicable to all kinds of fluids whether pure water, gasoline, hydrocarbons, HSD or any rare fluid. Triton provides you with wide range of portable flowmeters with sensors that are easy to carry and install and can work on different line sizes, you just have to change certain values. One can also check the signal quality and signal to noise ratio check are some of the unique features of the flowmeter. Benefits &Features : High accuracy, ±1% of velocity. NIST Standard Non-intrusive, clamp-on installation, easy and fast. No pipe disturbance, no pressure drop, no moving parts Light weight (1.2lbs/538g for the handset). Compact design. Bi-directional, wide range, [-52ft/s ~ 52ft/s (-16m/s ~ 16m/s)] Wide pipe size range, [3/4″ ~ 240″(DN20 ~ DN6,000 mm)] Suitable for all commonly used pipe materials and liquids. Rechargeable battery for 10 hours of operation. Built-in data logger. Totalizer for net, positive and negative flow. Self-explanatory user interface. Very easy to operate. Optional StufManager TM PC software for data download and real-time data display. Signal quality tracking and self-adjusting capabilities automatically match

Ultrasonic Flowmeters operating on the Time-of-Flight or Transit Time principle, use sound waves to accurately measure flow, particularly for non-conducting liquids like hydrocarbons and difficult applications like molten sulphur, bitumen, pitch and tar. They are especially suited to large bore pipelines and their accuracy is unaffected by changes in conductivity, density or viscosity. For process applications there is the Fullbore type model with sizes from 25mm to 3000mm. A clamp-on type in portable and fixed versions is available for pipe diameters upto 5000 mm. A CE product Compliance with E N61324Ultrasonic Transit time Measurement 40 Pico second sampling rate 8 mm to 10000 mm, +/- 20 m/sBuilt in data logger Up to 47000 recordsBuilt in printer interfaceBuilt in pressure (Head) measurement *Suitability with Partially filled pipe lines*Accuracy better than +/- 1 % of reading.Low power consumption less than 2.5 W PC connectivity through RS 485 / RS 232 port A new generation flowmeter. Best option against traditional full bore Magnetic & Woltman Bulk flow meters, flowmeter. 100% tamperproof, ideal for billing, available with retrofitting models for traditional Bulk water meters. Multiple options with GSM / GPRS connectivity, available with pre-paid water card up to sizes 200mm. OPEN CHANNEL FLOW MEASUREMENT : Monitor flow through open channels, partially full sewer pipes and surcharged pipes without a flume or weir. Ideal for Utilities, storm water, combined effluent, raw sewage, irrigation water and streams. The model II uses a submerged ultrasonic sensor to continuously measure both Velocity and Level in the channel. The sensor is a completely sealed ultrasonic unit with no orifices or ports. It mounts inside a pipe or at the bottom of a rectangular, trapezoid or egg-shaped channel. Calibration is simple: enter the pipe diameter or channel width and the meter computes the flow volume and displays the flow rate. Standard features include: sensor – measures flow Velocity and Level sensor cable – 25 ft / 7.6 m submersible, shielded 3-coaxial enclosure - watertight,IP66 (NEMA4X) polycarbonate displays - Flow Rate - large 4-digit LCD Totalizer/Menu/Status - 16-digit alphanumeric calibration - built-in 3-key programmer output – three isolated 4-20mA (1000 ohm), Flow, Level and Velocity 2 control relays - 5 amp, SPDT - programmable for flow proportional pulse output, flow and/or level alarm power input - 100-160VAC 50/60Hz electrical surge protection and RFI filters - AC, sensor, 4-20mA logger optional

Ultrasonic Flow Meter, Flow Meter, Coriolis Mass Flow Mete

Ultrasonic clamp on type flow meter is N9n invasive method to measure flow of any fluid under pipe size of 6mm to 6500mm. Portable or fixed unit can also be uaed for the measurements of density, concentration as well as mas flow.

Ultrasonic Inline Flow Meter, Digital Pressure Transducer