Wire Plant Dealers in Indore (3 products available)

We are the eminent Horizontal Wire Enamelling Plant Manufacturer and Supplier in Indore, Madhya Pradesh, India. These Horizontal Wire Enamelling Plants are the Machines through which the enamel is applied on the surface of Copper / Aluminum. In Horizontal Enamelling Plants the ovens are horizontally mounted, the hot air flows with induced draft only (with Air Blower Control). Normally for the thicker wires & strips – longer ovens are required for better soaking time and hence are produced in vertical enamelling plants. If thicker Wires / Strips are processed in Horizontal Ovens then following problems may occur : The Wires / Strips will have SAG Problem due to heavy cross sectional weightBecause of SAG the Wires / Strips will not run in the centre of the OvenThe Enamel Applied will not be uniform on the Surface and will be oval Finer wires can be processed in horizontal ovens since all the above problems are minimized for finer wires. Horizontal Wire Enamelling Plant Are The Combination Of Drawing of Wires / Rolling of Strips through – Wire Drawing Machine/ Strip Rolling MachineFeeding the bare copper / Aluminium Wires – Strips – from Pay OffsSoftening of the Wires / Strips through - PreannelersApplication of Enamel on the surface – Varnish Application SystemBaking the Enamel Film in - OvensRe - Application of Enamel on the surface – Varnish Application SystemRe - Baking the Enamel Film in - OvensAbove item 3 & 4 are repeated and the repetition No is called – No of PassesPulling of the Finished Wires / Strips from the oven on – Take UpWinding of finished Wires / Strips – Winding UnitsLayer wise winding on spools – Traversing UnitsControlling of all the plant through – Control Panel In some of the Imported Enamelling Plants the Wire Drawing Machines are the part of Enamelling Plants and are connected In-Line with Enamelling Plants. Used For Producing Super Enamelled Copper Wires from 0.5 MM to 0.07 MM (25 SWG TO 45 SWG) Specifications SWG RangeOven LengthNo. of LinesPreanneler LengthOvenNo. of Passes25 to 383 .5 Mtrs.8 /12 /183.5 Mtrs.Com/ Indv8 / 1030 to 40 2.5 Mtrs12 /183 Mtrs.Com/ Indv840 to 473 Mtrs.122 Mtrs.Com/ Indv 8

Wire Cable Coating Plants, Twin Die Head, Spray Cooling Tanks

Wire and Cable Coating Plant, automatic cutter, Twin Die Head