Industrial Plastic Pipes Dealers in Jaipur

Double Wall Corrugrated Sewerage Pipe (mm):.Stiffness Class:SN4 or SN8,SN4 or SN8,SN4 or SN8. Length(Mtr):6 Mtr.,6 Mtr.,6 Mtr.. These pipes are manufactured on imported production lines and according to various national and international standards.

Reckoned for our extensive array of products, we efficiently serve our customers from Rajasthan(India). Get in touch with us for placing small as well as bulk orders, timely deliveries will be straight to your doorstep!

We are offering Double Wall Corrugated Pipes from inner diameter 32mm to 63mm respectively. Double Wall Corrugated Pipes are used in ducting for underground cables. These Double Wall Corrugated Pipes have higher ring stiffness and crush resistance capacity compared to plain polymer pipes. Double Wall Corrugated Pipes have resistances to corrosion, chemically inert, environmentally safe; have good impact strength, good abrasion resistance. Due to smooth inner wall, there is minimum friction loss in Double Wall Corrugated Pipes. Even when the pipe is bent, the roundness of the pipe is retained. These pipes can take a heavy earth loads and it can be easy jointed. Double Wall Corrugated Pipes can be jointed in various ways like snap fit coupler with rubber ring, heat shrink sleeves, butt-welding, split coupler and compression couplers. Fittings available for the pipes are end caps, bend tees reducers, spacers etc. These pipes can withstand rodent attacks and are flame retardant and permanently lubricated silicone inner layer, with extra smooth inner layer to facilitate blowing optical fiber cable.

HDPE Pipes are manufactured from High Density Polyethene Grade Material PE-63, PE-80, PE-100 a most versatile material suitable for pipes. HDPE pipes are of low costs and high performance. The pipes are better substitute for costly Metallic and Non Metallic pipes like DI, CI, MS, GI, AC.

The company is the chief HDPE Pipes Manufacturer and Supplier in India. These HDPE Pipes are made in compliance with IS: 4984-1995 and 1S: 14333-1996 standards. The HDPE Pipes are fabricated using the premium HDPE, under the expert supervision. Available in different sizes, our HDPE Pipes are high in performance and quality. Details Made from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100Sizes : 20mm to 500mm (size can be increased, if necessary) outer diameterPressure rating: from 2.5 to PN 16.0. Applications Water supply systemsFor suction and delivery lines of jet pumps and centrifugal pumpsAs a replacement of G. I. Pipes in borewell application to submersible pumps Industrial applications Transportation of acids and alkaliesAs ducts for air conditioning & ventilationFor transporting slurries of iron ore, fly ash, etcDisposal of corrosive effluents chemicals and treated / untreated wastesFor conveying edible oils, fruit pulps, juices, milk and other food products Environmental Protection For drainage of sewerageFor disposal of sand slurry in dredging operationsHDPE Pipes are also used for water treatment plants & industrial waste treatment plants Advantages Low co-efficient of frictionAbrasion & wear resistantLow specific weight & flexibilityPerfect weld ability, tough and strongGood chemical & weather resistant

Our HDPE Pipes are used for gravity water supply system, underground water pipe line and L.P.G distribution. HDPE Pipes, offered by us, minimizes the loss due to friction as these have smooth inner surface. Therefore, our HDPE Pipes reduce consumption of electricity. Not just this, HDPE Pipes, provided by us, allows easy lowering and un-lowering of submersible pumps. Features : High corrosion resistance Resulting in longer life High impact strength High chemical resistance Absolutely inert to any pH value Virtually maintenance-free Applications : Domestic : Lift irrigation scheme and farm irrigation scheme Chilled water circulation Potable water supply Temporary supply system like construction water lines, drought relief and flood relief Riding main and distribution network for raw/filtered water Industrial : Conveyance of acids, alkalis and all corrosive chemicals Conveyance of edible oils, fruit pulps juices, milk and brine water Effluent collection and disposal system : Treated radioactive waste Corrosive chemicals Effluents and all corrosive chemicals Gas/compressed system : Community biogas schemes Natural gas and coal conveyance and consumer distribution Conveyance and distribution of sewage, gas and cow dunk (Gobar) gas Compressed air supply network at construction sites, mines and factories Agricultural : Submersible pump delivery lines Multi irrigation system Lift/flow irrigation Suction and delivery of pumps Highlights : Suitable to withstand high internal and external loads of internal fluid as well as external soil Suitable for acids, alkalis and can be laid in marshy and corrosive soils Without any coating and cathodic protection Tough due to high flexural and impact strength Resistant to abrasion Light in weight Long lasting Elastic in nature Suitable for transportation of slurry, boiler ash, ores, beach sand etc. Maintenance free Physiologically harmless, as the pipes are odorless and cause no bacterial growth Transportation of portable water and other flowable edibles Available Sizes : Outside Diameter : 20mm to 360mm Pressure Ratings : PN 2.5 to PN 16Pipes in various SDR Series can also be supplied  

HDPE Pipes are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20mm to 500mm (Size can be increased , if necessary) outer diameter and in pressure rating from 2.5 to PN 16.0. Applications Water Supply Systems * In water supply distribution systems * As a replacement of G. I. Pipes in Borewell application to submersible pumps. * For suction and delivery lines of jet pumps and centrifugal pumps. Industrial applications * Disposal of corrosive effluents chemicals and treated / untreated wastes. * Acids and Alkalies can be transported through these pipes. * For conveying edible oils, fruit pulps, juices, milk and other food products. * As ducts for Air conditioning and ventilation. * For transporting slurries of Iron Ore, Fly Ash etc. Environmental Protection   * HDPE Pipes are also used for industrial waste treatment plants and water           treatment   plants. * For drainage of sewerage * For disposal of sand slurry in dredging operations. Advantages * Low specific weight and flexibility * Perfect weld ability, tough and strong * Abrasion and wear resistant * Good chemical and weathering resistance * Low co-efficient of friction

We are one of widely acknowledged GRP Pipes Manufacturers. We offer products in various grades, shapes, and sizes. Our Glass Reinforced Plastic Pipes are available in several diameters, length, stiffness class, and pressure class. Our products are especially designed with unique features such as technically strong, durable, efficient, weatherproof, non-corrosive, etc. Our Corrosion Resistant Glass-Reinforced Plastic Pipe is high on demand due to their efficiency and consistency. We serve various Industries and Municipal Corporation. Our products are used in Sewerage and Effluent Disposal, Power Plants, Oil & Gas Pipes, Fertilizer Manufacturing Plants, Refineries, Steel Mills, Food Processing Pharmaceuticals, Chemical Process Industry and many more. Click Here For Advantages of GRP Pipes Click Here For Applicable standards of GRP Pipes Click Here For Comparision Click Here For Joining System of GRP Pipes Click Here For Price Calculation Click Here For Specification of GRP Pipe Click Here For Testing Quality Checks

HDPE Pipes are manufactured from High Density Poly Ethylene Polymers i.e. PE-63, PE 80, PE 100. HDPE Pipes are available in sizes 20mm to 315mm outer diameter and in pressure rating ranging from PN 2.5 to PN 16.0.   APPLICATIONS       Water Supply Systems In Water supply distribution systems As a replacement of G.I. Pipes in Borewell Application to submersible pumps For suction and delivery lines of jet pumps and centrifugal pumps Domestic Gas Distributions is perfectly possible   INDUSTRIAL APPLICATIONS       Disposal of corrosive effluents chemicals and treated / untreated wastes Acids and Alkalies can be transported through these pipes For conveying edible oils, fruit pulps, juices, milk and other food products As ducts for Air Conditioning and ventilation For Transporting slurries of Iron Ore, FlyAsh etc Under Water (Submarine pipe lines) pipe lines is feasible   ENVIRONMENTAL PROTECTION       HDPE Pipes are also used for Industrial waste treatment plants and water treatment plants For disposal of sand slurry in dredging operations For drainage of sewerage   ADVANTAGES       Low Specific weight and flexibility Perfect weld ability, tough and strong Abrasion and wear resistant Good Chemical and weathering resistance Low co-efficiant of Friction   RECOMMENDATIONS         DEPTH OF THE BORE PRESSURE CLASS         Up to 55 meters 4.0 kg/cm2         Up to 90 meters 6.0 kg/cm2         Up to 140 meters 10.0 kg/cm2         Up to 170 meters 12.5 kg/cm2

This is durable and lightweight. This is flexible which enables for smooth installation. This is even wall thickness as per ISI norms. This is available in 20 mm to 110 mm Diameter. In single length starting from 20 Mtr. up to 300 Mtr. It used for water transportation, lift, sprinkler, drip irrigation, LPG distribution, Underwater pipeline, for compressed air supply ( Mines & Factories), Air conditioning & Ventilation Ducts. It have smooth inner surface due to which the friction resistance is minimised which increases free flow of water & efficiency of pump. It also reduces electricity consumption.

It is made of either of three grades of High Density Poly Ethylene polymers. i.e PE-63, PE-80 & PE-100       PRODUCT RANGE :   These HDPE pipes are available in sizes 20 mm to 315mm in pressure rating of PN-2.5, PN-4.0, PN-6.0, PN-8.0, PN-10.0, PN- 12.5 & PN-16.0 in all three grades PE-63, PE-80 and PE-1 00     APPLICATIONS :   Effluent and Waste Water Disposal : Effluents of varied chemical compositions can be effectively disposed of using Gangotri HDPE pipes & coils, with the aid of the latest know-how on piping engineering, pipelines for waste collection and disposal in chemical industry. Longevity of Gangotri pipes under such application would rate the best amongst the conventional pipe even under critical service conditions     Domestic Gas Distributions :   Earlier, engineers always carried a psychological fear in using HDPE pipes rather plastic pipes for conveyance of inflammable gases. However experiments and extensive trials proved these fears totally wrong and heavy established excellence of performance of HDPE pipes for conveyance of all type of combustible gases. Experiments have also proved that the permeable losses are insignificant in regard to safety and environmental impact     Submarine Pipelines : One of the most important applications where all salient features of Gangotri pipes prominently figure out is for under water pipelines. Gangotri pipes have been successfully laid for under water river crossing, creek crossing, marine out- falls and for brine intake lines in the open sea. Hazardous chemical effluents and radio active wastes are being harmlessly disposed into deep sea through Gangotri pipes with substantial cost savings. Schemes which would have been dropped due to economical un-viability have been made feasible with Gangotri pipes.     PROPERTIES :   • Economical than traditional pipe material. • Resistance to chemicals- Exceptional resistance to all external and internal corrosion. • Resistant to electrolytic corrosion. • Will not rust or not. • Welded joints speedup installation-Trench widths reduced which leads to saving in the cost of excavation and back filling. • Light weight - One sixth of the weight of steel. Low specific gravity giving an outstanding light weight product for easy transportation, handling, fitting etc. • Very good thermal insulation due to low thermal conductivity. • Smooth bore provided less head loss. Flow resistance is approximately 30% less than that of conventional pipes, permitting the use of a smaller bore pipe for a given rate of flow. • Perfect stability of material obviates the risk of ageing. • Total neutrality to products conveyed. • Flame resistance classifying the material as self extinguishing according to test standard employed. • Low maintenance cost. • Easy to install. • Longer life than G.l, M.S, cement and other pipes.  

REX HDPE Pipes are manufactured from High Density Polyethene Grade Material PE-63, PE-80, PE-100 a most versatile material suitable for pipes. HDPE pipes are of low costs and high performance. The pipes are better substitute for costly Metallic and Non Metallic pipes like DI, CI, MS, GI, AC. HDPE Pipes are generally made black in colour by addtion of Carbon Black to protect from ageing & degradation due to ultraviolet sunrays. Pipes are manufactured in sizes from 20mm to 315mm Outside Diameter in all Classes/ Pressure Ratings as per IS:4984:1995 & IS:14151:1994 duly ISI marked. The pipes are available in Coil Form or Straight Lengths depending on sizes and customer requirements. ADVANTAGES OF REX HDPE PIPES Light Weight Flexibility Toughness Chemically Inert Resistance to Abrasion Smooth Surface Environmental Stress Crack Resistance Corrosion Resistance Frost & Rodent Resistance Hygenic Safety Easy & Quick Installation Low Thermal Conductivity

Our CPVC Pipes are available in different sizes, having length of 6-12m and thickness of 1-4mm. These CPVC Pipes are reckoned for their high tensile strength and are manufactured in compliance with the set industrial standards. Features: For construction industry Finely finished Reasonably priced

JAI KISAN HDPE Pipes and Coils are precisely manufactured under the supervision of qualified professionals, using quality tested raw materials that is sourced from authentic vendors.   It is made of either of three grades of HDPE i.e. PE-63, PE-80 and PE-100.   These HDPE pipes are available in sizes 32mm to 200mm in pressure rating of PN 2.5, PN 4, PN 6, PN 8, PN 10, PN 12.5and PN 16 in all three grades PE-63, PE-80 and PE-100.   Our pipes are Highly durable / Long lasting, Non toxic, strong, ductile, Hydraulically smooth and self restrained (Monolithic), Resistent to Superior corrosion, chemical, weather and abrasion, Safe for drinking water with no toxic or chemical contamination. Moreover they are light weight with only 0.95grams/cm2 , which means their weight is 1/5th of steel pipes of the same size. They are highly flexible i.e. they can be bent as much as 25-40 times of the pipe diameters, thus reducing unnecessary pipe joints. They have Easy weld ability than other metal based pipe and Super smooth internal surface, reducing the chance of pipe cloggage. A rust proof and high resistence to damaged chemicals, make the product last upto 50 years.   Applications :   ► As ducts for air conditioning & ventilation. ► Are also used for industrial waste treatment plants & water Treatment plants. ► For drainage of sewerage. ► Alternate to GI Pipes in bore well to suspend submersible pumps. ► For supply of portable water.