Design
:
Screw-down Cast Iron Stop Valve screwed female ends with Forged Brass spindle & Brass jumper valve.
Range
:
15mm to 25 mm.
Marking
:
One side of the body "ALTO" & "Size". Other side of the body "Tested 20kg/cm²".
Utility
:
Quite suitable for Water and Oil applications.
Temp. Range
:
10° C to 100° C.
Testing
:
Hydraulically
Design
:
Screw-down Cast Iron Stop Valve screwed female ends with Forged Brass spindle & Brass jumper valve.
Range
:
15mm to 25 mm.
Marking
:
One side of the body "ALTO" & "Size". Other side of the body "Tested 20kg/cm²".
Utility
:
Quite suitable for Water and Oil applications.
Temp. Range
:
10° C to 100° C.
Testing
:
Hydraulically
Design
:
Cast Iron Vent Hood BSP Screwed female end fitted with Bronze check nut & S.S-304 mesh or as demanded.
Range
:
40mm & 50mm.
Marking
:
One side of the body "ALTO" & "Size" Other side of the body "VENT HOOD".
Utility
:
To exhaust the gas of diesel tanks, water tanks, other oil tanks and molasses tanks etc.
Temp. Range
:
10° C to 200° C.
Testing
:
Hydraulically
Design
:
Cast Iron Vent Hood BSP Screwed female end fitted with Bronze check nut & S.S-304 mesh or as demanded.
Range
:
40mm & 50mm.
Marking
:
One side of the body "ALTO" & "Size" Other side of the body "VENT HOOD".
Utility
:
To exhaust the gas of diesel tanks, water tanks, other oil tanks and molasses tanks etc.
Temp. Range
:
10° C to 200° C.
Testing
:
Hydraulically
Design
:
Aluminium/Cast Iron Fill Cap BSP Screwed female end backed by rubber ring with locking arrangement.
Range
:
80 mm.
Marking
:
Top of the cap "ALTO" & "Size".
Utility
:
To fill and measure the quantum of the diesel or petrol in the tank.
Temp. Range
:
10° C to 200° C
Testing
:
Hydraulically
Design
:
Aluminium/Cast Iron Fill Cap BSP Screwed female end backed by rubber ring with locking arrangement.
Range
:
80 mm.
Marking
:
Top of the cap "ALTO" & "Size".
Utility
:
To fill and measure the quantum of the diesel or petrol in the tank.
Temp. Range
:
10° C to 200° C
Testing
:
Hydraulically
Design
:
Cast Iron Anti-Waste Tap Screwed female end with M.S. Stem, Brass nut & rubber washer.
Range
:
15mm to 20mm.
Marking
:
One side of the body "ALTO","Size" & "Tested". Other side of the body "ALTO".
Utility
:
Quite suitable for Water and Oil applications.
Temp. Range
:
10° C to 100° C.
Testing
:
Hydraulically
Design
:
Cast Iron Anti-Waste Tap Screwed female end with M.S. Stem, Brass nut & rubber washer.
Range
:
15mm to 20mm.
Marking
:
One side of the body "ALTO","Size" & "Tested". Other side of the body "ALTO".
Utility
:
Quite suitable for Water and Oil applications.
Temp. Range
:
10° C to 100° C.
Testing
:
Hydraulically
Design
:
Bronze Terrace Valve BSP Screwed female end with light spring & Aluminium disc.
Range
:
40mm & 50 mm.
Marking
:
Top of the cap "ALTO" & "Size".
Utility
:
To exhaust the gas of petrol tanks.
Temp. Range
:
10° C to 200° C.
Testing
:
Hydraulically
Design
:
Bronze Terrace Valve BSP Screwed female end with light spring & Aluminium disc.
Range
:
40mm & 50 mm.
Marking
:
Top of the cap "ALTO" & "Size".
Utility
:
To exhaust the gas of petrol tanks.
Temp. Range
:
10° C to 200° C.
Testing
:
Hydraulically
Design
:
Cast Iron Ball Valves BSP Screwed Female Ends One Piece Design having S S Ball supported by PTFE rings, Flat Lever attached from l5mm to 50mm & S.G. Iron Handle attached from 65mm to 100mm. NOTE : A detachable Pipe Handle is supplied with this Valve (from 65mm to 100mm) to be attached with S.G. Iron Handle while installing/operating.
Range
:
15mm to 100mm.
Operation Marking
: :
Quick opening by quarter turn operation. One side of body "ALTO" & "Size". Other side of body "Tested 34kg/cm²".
Utility
:
Fuel oils, kerosene oils, compressed air, gases, low pressure steam, viscous fluids & hydraulic (Water, Oil etc) installations.
Temp. Range
:
10° C to 200° C.
Testing
:
Hydraulically
Design
:
Cast Iron Ball Valves BSP Screwed Female Ends One Piece Design having S S Ball supported by PTFE rings, Flat Lever attached from l5mm to 50mm & S.G. Iron Handle attached from 65mm to 100mm. NOTE : A detachable Pipe Handle is supplied with this Valve (from 65mm to 100mm) to be attached with S.G. Iron Handle while installing/operating.
Range
:
15mm to 100mm.
Operation Marking
: :
Quick opening by quarter turn operation. One side of body "ALTO" & "Size". Other side of body "Tested 34kg/cm²".
Utility
:
Fuel oils, kerosene oils, compressed air, gases, low pressure steam, viscous fluids & hydraulic (Water, Oil etc) installations.
Temp. Range
:
10° C to 200° C.
Testing
:
Hydraulically
Design
:
Cast Iron Gate Valve BSP Screwed Female Ends with non rising stem Dimensions matched to IS:778-Class-II Available in: a) Bronze seat with Forged Brass stem. b) Bronze seat with S.S stem. c) C.I seat with M.S stem.
Range
:
15mm to 100mm.
Operation Marking
: :
Hand Wheel Operated. One side of body "ALTO" & "Size" Other side of body "Tested 20kg/cm²"
Utility
:
1) Bronze Seat with Brass Stem/Bronze Seat with S.S. Stem. Fuel oils, kerosene oils, compressed air, gases, low pressure steam, viscous fluids & hydraulic (water,oil etc.) installations. 2 ) C.I. Seat With M.S. Stem. Oils and non-corrosive chemicals only. (Highly restricted for use on water lines)
Temp. Range
:
10° C to 200° C.
Testing
:
Hydraulically
Design
:
Cast Iron Gate Valve BSP Screwed Female Ends with non rising stem Dimensions matched to IS:778-Class-II Available in: a) Bronze seat with Forged Brass stem. b) Bronze seat with S.S stem. c) C.I seat with M.S stem.
Range
:
15mm to 100mm.
Operation Marking
: :
Hand Wheel Operated. One side of body "ALTO" & "Size" Other side of body "Tested 20kg/cm²"
Utility
:
1) Bronze Seat with Brass Stem/Bronze Seat with S.S. Stem. Fuel oils, kerosene oils, compressed air, gases, low pressure steam, viscous fluids & hydraulic (water,oil etc.) installations. 2 ) C.I. Seat With M.S. Stem. Oils and non-corrosive chemicals only. (Highly restricted for use on water lines)
Temp. Range
:
10° C to 200° C.
Testing
:
Hydraulically
Design
:
Cast Iron Gate Valve Flanged Ends (Undrilled) with non rising stem Dimensions matched to IS:778-Class-II Available in : Bronze seat with forged Brass stem. (Valves with Drilled Flanges may be supplied on demand)
Range
:
15mm to 100mm.
Operation Marking
: :
Hand Wheel Operated. One side of body "ALTO" & "Size" Other side of the body "Tested 20kg/cm2".
Utility
:
Fuel oils, kerosene oils, compressed air, gases, low pressure steam, viscous fluids & hydraulic (Water, Oil etc) installations.
Temp. Range Testing
: :
10° C to 200 ° C Hydraulically
Design
:
Cast Iron Gate Valve Flanged Ends (Undrilled) with non rising stem Dimensions matched to IS:778-Class-II Available in : Bronze seat with forged Brass stem. (Valves with Drilled Flanges may be supplied on demand)
Range
:
15mm to 100mm.
Operation Marking
: :
Hand Wheel Operated. One side of body "ALTO" & "Size" Other side of the body "Tested 20kg/cm2".
Utility
:
Fuel oils, kerosene oils, compressed air, gases, low pressure steam, viscous fluids & hydraulic (Water, Oil etc) installations.
Temp. Range Testing
: :
10° C to 200 ° C Hydraulically
Design
:
Cast Iron Wheel (Globe) Valve No.5 BSP Screwed Female Ends available in: a) Bronze renewable seat and Forged Brass stem. b) S.S renewable seat and stem. Cast Iron Wheel (Globe) Valve No.4 BSP Screwed Female Ends available in: a) PTFE seat and Forged Brass stem. (from 20 mm to 32 mm) b) Forged Brass seat and stem. (15mm, 40mm & 50mm)
Range
:
a) Wheel Valve No. 5 - 8mm to 100mm. b) Wheel Valve No. 4 - 15mm to 50mm.
Operation Marking
: :
Hand wheel operated. One side of body "ALTO No.-4"/"ALTO No.-5". Other side of body "Tested", "Size" & "Arrow".
Utility
:
Hot water, fuel oils, kerosene oils, gases, low pressure hot gases & hydraulic (water oil etc) installations. NOTE : Wheel Valve No-4 20mm & 32mm is specially recommended for use on Voltage Transformers.
Temp. Range
:
10° C to 200° C.
Testing
:
Hydraulically
Design
:
Cast Iron Wheel (Globe) Valve No.5 BSP Screwed Female Ends available in: a) Bronze renewable seat and Forged Brass stem. b) S.S renewable seat and stem. Cast Iron Wheel (Globe) Valve No.4 BSP Screwed Female Ends available in: a) PTFE seat and Forged Brass stem. (from 20 mm to 32 mm) b) Forged Brass seat and stem. (15mm, 40mm & 50mm)
Range
:
a) Wheel Valve No. 5 - 8mm to 100mm. b) Wheel Valve No. 4 - 15mm to 50mm.
Operation Marking
: :
Hand wheel operated. One side of body "ALTO No.-4"/"ALTO No.-5". Other side of body "Tested", "Size" & "Arrow".
Utility
:
Hot water, fuel oils, kerosene oils, gases, low pressure hot gases & hydraulic (water oil etc) installations. NOTE : Wheel Valve No-4 20mm & 32mm is specially recommended for use on Voltage Transformers.
Temp. Range
:
10° C to 200° C.
Testing
:
Hydraulically
Design
:
Cast Iron Wheel (Globe) Valve Flanged Ends (Undrilled) matched to IS:778-1984-Class-II Available in Bronze renewable seat and Forged Brass stem. (Valves with Drilled Flanges may be supplied on demand)
Range
:
15mm to 100mm.
Operation Marking
: :
Hand Wheel Operated. One side of body "ALTO" Other side of body "Tested", "Size" & "Arrow".
Utility
:
Hot water, fuel oils, kerosene oils, gases, low pressure hot gases & hydraulic (water oil etc) installations.
Temp. Range
:
10° C to 200° C
Testing
:
Hydraulically
Design
:
Cast Iron Wheel (Globe) Valve Flanged Ends (Undrilled) matched to IS:778-1984-Class-II Available in Bronze renewable seat and Forged Brass stem. (Valves with Drilled Flanges may be supplied on demand)
Range
:
15mm to 100mm.
Operation Marking
: :
Hand Wheel Operated. One side of body "ALTO" Other side of body "Tested", "Size" & "Arrow".
Utility
:
Hot water, fuel oils, kerosene oils, gases, low pressure hot gases & hydraulic (water oil etc) installations.
Temp. Range
:
10° C to 200° C
Testing
:
Hydraulically
Reviews & Ratings
Write a Review
Post Free Ad