B.V.M. Manufacturers & Exporters Dhogri, Jalandhar, Punjab

Specification & Features:Screwed Female ends to BS: 21 / ISO: 7 / IS: 554Stainless Steel (AISI - 304) or Brass perforated sheet screenis guided in body & cap.Screwed Cap upto 2" & Bolted cover for 2 1/2" & 3" Sizes.Fine Finish & Smooth Contours to minimize pressure drop in the strainer.Large screening area makes the strainer efficient in performance.

Specification & Features:Inbuilt Strainer : Avoids CloggingScrewed Female BSP Taper Ends / Socket Welded EndsHardened Disc To Withstand Continuous Water HammeringAll Stainless Steel Construction : Better Mechanical PropertiesSeat Integral With Body : No Possibility Of Leakage From Joints Operation: The steam trap works on the pressure difference, above and below the disc. Disc is raised from its seat dueto incoming pressure. High velocity of flashing condensate create low pressure beneath the disc, at the sametime pressure is build up in the chamber that force the disc on the seat. Now the condensates in the chamberdecrease the pressure and when it is lower than the inlet pressure, the disc lifts. This cycle repeats again and again.

Specification & Features:Straight Pattern, Open Discharge,Screwed Male Threads at Inlet to BS 21.Angle Pattern, Enclosed Discharge, Screwed Male Threadsat Inlet and Screwed Female Ends at Outlet to BS 21.These Valves start opening at the set pressure & open indirect proportion to the increase, in order of set pressure.These should be installed nearer to the pressure vessel theyprotect. When installed, they should be one size smallerthan the pipeline size.

Specification & Features:Confirming to BS : 5152Flanged ends to DIN 2533 PN-16 RF upto 150mm sizes.For sizes 200mm to 300mm PN-10 RFStraight / Angel pattern, outside screw, yoke type, rising stem.With Back Seat Arrangement, Hand wheel operated.Renewable 13% Cr. Stainless Steel (AISI - 410) Working Parts.Minimum pressure drop inside the body due to streamlined body design

FORGED STEEL GATE VALVE CL - 800 Specification & Features:Conforming To API 602 BS EN - 15761 Screwed female ends to NPT / Socket Welded Ends To ANSI B 16.11Bolted bonnet, outside screw, yoke type, rising steamHandwheel Operated, Sturdy in design & superb in quality.

Specification & Features:Conforming To API 602 / BS EN - 15761 Screwed female ends to NPT (or)Socket Welded Ends To ANSI B 16.11Bolted cover, Sturdy in design & superb in quality. Pressure / Temperature ratings:

Specification & Features:Conforming To API 602 BS EN - 15761 Screwed female ends to NPT / Socket Welded Ends To ANSI B 16.11Bolted bonnet, outside screw, yoke type, rising steamHandwheel Operated, Sturdy in design & superb in quality. Pressure / Temperature ratings:

3 Pcs Design (Reduced Bore) Specification & Features:Design Ref. BS EN ISO 17292 (BS 5351)Three Pcs Design, Reduced Bore, Blow Out Proof Stem,Floating Ball, PTFE Seats / Seals.Quarter Turn Lever Operated.Screwed Female Ends to BS 21 / ISO 7 / NPTSocket Weld Ends to ANSI B16.11Butt Weld Ends to ANSI B16.25Ideally suited for bi-directional, on/off dutiesfor general services within the Pressure / Temperatureratings of PTFE Seals.Three-piece construction makes for easyinspection and maintenance without breakingor remaking the Pipeline.

dual plate check valve features: light weight thus easier handling and self supporting. more compact & structurally sound design. low pressure drop and reduced energy loss irrespective of pressure ratings. streamlined flow way. efficient and positive sealing under most flow & pressure conditions. Valve closes before flow reversal at zero velocity. inherent non-slamming. No external device/attachments required. water hammer almost non-existent. long life and trouble free operation interchangeable disc design bonded resilient seat. body hard epoxy painted for better corrosion resistance. disc- wcb (powder coated), aisi 420, bronze, sgi. independent plate suspension flexible installation optimizes space utilization.

  Specification & Features:Conforming to BS : 1414 / ANSI B16.34 / API 600Flanged ends to ANSI B16.5 CL-150 RFOutside screw, yoke type, rising stem, bolted bonnet.Renewable S.S 13% Cr. (AISI - 410) Working Parts.Handwheel operated.

Specification & Features:Flanged Ends To BS - 10 Table 'J'.It maintains fluid tightness and is easy in operation because of parallel slidingaction of discs. Operation: Spring keeps the disc in parallel position and disc removes any dust or deposits from the bodyrings. Hence low torque is required to operate the valve. Rack and Pinion arrangement enables to open / close in half turn.

Specification & Features: Confirming to BS : 5153Flanged ends to DIN 2533 PN-16 RF upto 150mm sizes.For size 200mm PN-10 RFStraight / Angle pattern, bolted cover, Full flow Area.Renewable 13% Cr. Stainless Steel (AISI - 410) Working Parts.Minimum pressure drop inside the body due to streamlined body design.

Specification & Features:Design Ref.: BS 5155, API-609, IS: 13095Mounting Flange according to ISO: 5211Available in Clutch Type Handles.Also Suitable for Actuator & Gear Mountings100% Leak Tight DesignCompact Design to Facilitate InstallationNo Part in Contact with Fluid Except Disc and Liner.

BRONZE GLOBE VALVE (UNION BONNET) Specification & Features:Manufacture is to BS 5154/ B PN 32Screwed Female Ends to BS: 21 / ISO: 7 / IS: 554Flanged Ends to BS: 10 Table 'F' Inside Screwed, Rising Spindle with Back Seat ArrangementS.S. Working Parts, Hand Wheel Operated.

Specification & Features:Flanged Ends To BS - 10 Table 'H'.It maintains fluid tightness and is easy in operation because of parallel sliding action of discs.  Operation: Spring keeps the disc in parallel position and disc removes any dust or deposits from the body rings. Hence low torque is required to operate the valve. Rack and Pinion arrangement enables to open / close in half turn.

Specification & Features:Conforming To API 602 BS EN - 15761 Screwed female ends to NPT / Socket Welded Ends To ANSI B 16.11Bolted bonnet, outside screw, yoke type, rising steamSturdy in design & superb in quality.Handwheel operated.