Water Level Controller Dealers

    This is the simplest Basic water level Controller with indicator it is the most economical and energy efficient product from RGR Technologies. ​ Visual Indications : Two sump levels, Two over head tank indication. Flow, motor on, dry run, power on. Features: The water level controller can switch on or switch off the pump, to maintain the pre defined water level at the storage tanks. ​ Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement. ​ Its has the following unique feature:1) Whentank is in reserve mode or empty it automatically starts the motors if water is present in the Sump tank.2) If water is present in the line it indicates the presenceon the unit (Flow Indicator).3) It indicates water levels reaching intank, which is helpful if there are open taps, blockage, leakage or damage in the pipeline connected to the upper head, ground or the desired storage tank.4)It green colored 2 level indications (half tank & full tank) of water in tank as well as 2 level indications (foot valve level & half tank) of sump tank.5) On motor symbol greencolored indication for motor ON & redcolored indication for dry run of motor.6) Has rocker switch to select Auto/manual operation.7) Has soft touch ‘NEED’ button to switch ON the motor irrespective of any level in the overhead tank. ​ Application: mono block pumps (sump motors)System is suitable only for single phase pump sets of maximum 1 H. P. ratings. ​ This Water level controllers Indicator is highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc. ​ At large our systems not only help you but your neighbors and society, also as it reduces the wastage of water by cutting down any further overflow than what you need.

We have developed a separate unit for keeping a large stock. This unit is managed and maintained by our adroit professionals and fulfills the ever-growing needs of the clients. Our organization is a one-stop stop and the best destination for acquiring superiority guaranteed Water Level Controllers.   Details : Water Level Indicator Water Level Alarm Automatic Water Level Controller

We introduce our self as a leading service provider of automatic water level controller in northeast of all kinds of water pump. As you know water is very precious now a day in our cities and towns. It often found that we forget to put off the pump set on time and as a result we waste lots of water by over flowing moreover in this busy world we don’t have sufficient time to look after the pump motor and wait long time till the tank becomes full. So our product olsafe solve your problem of overflow and switch off your pump set on time. And at the same time motor get start when your tank gets empty. So you won’t get into any such situation when there is no water in your tap while using your bathroom and toilet. So after installing our product you will be free from this daily routine and can save your valuable time along with water and electric usage. We offer 2 years replacement guarantee. Both analogue and digital models are available.

We can be trusted for delivering the orders in an efficient manner and that too within the given time frame. Our pool of professionals keep close eye on the quality of the products so as to deliver the best in class range.

The Sri Digitek™ water level controller ULDX-01 is a high performance system, built compactly to provide advanced features like clear liquid level display, auto / manual MODE selection soft switches, in-built low and high voltage cut-off, surge protection, dry run protection and easy operation. The water level controller can switch on or switch off the pump, to maintain the predefined water level at the storage tanks. Sri Digitek™ Automatic Water Level Controller ULDX-01 can control motors up to 2 Hp capacity directly (with- out starter).Suitable For Mono Block Pumps, Sump Submersible Pumps, Jet Pumps, Centrifugal Pumps,….Etc.Application Like Residential Buildings, apartment’s, Commercial Complexes, Industrial Buildings, Hotels, Hospitals, . . . .Etc FEATURESHigh reliability and Low maintenance.Automatic Water Level Controller ULDX-01 can be used for a long time, no maintenance or repairing would be Required during its operational period.Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement. Overflow prevention system provides effective and reliable Water level monitoring, with Level Indicators.Visual Indications : Four stage water level indicator for over head tank, three stage water level indicator for the sump, water flow indication, voltage level indication, power on indication and auto/manual indication.How It Works : Automatically starts the motor when the water level in the over head tank drops below a pre-defined level (normally 50%) and switches off the motor at tank full or the sump water level drops below foot valve level.Dry RunDue to faulty foot valve or air leakage in the pipe if the motor runs dry then it gets switched off automatically and gives fault indication. For more details please watch video demo.Voltage Cut-offAutomatic Water Level Controller ULDX-01 automatically switches-off the pump if the supply voltage drops below 160V or Crosses 250V. Surge protection Built in surge protection is the Main featurese of ultradeluxe series.Soft Switch auto / ManualAutomatic Water Level Controller ULDX-01 comes with this feature of selecting manual/auto mode as per the requirement by just pressing the respective soft switch.Manual mode is used to Draw the water directly from the pump for activities like car wash, front area wash, tank cleaning, watering the plants Etc….NeedThe Optional Need soft switch is provided to Switch on the motor irrespective of the water level in over head tank. Rocker Bypass Switch. The optional rocker switch is provided to bypass system operation in case of system failure. so no need to disconnect the system when it gets failed. Power ON/OFF Switch. Has rocker switch to select Power On/Off operation.The Special Feature Automatic Water Level Controller ULDX-01 shifts from Manual Mode to Auto Mode automatically if the over head tank gets filled. The system changes the mode automatically. In Ultra deluxe series varients are avilable for any type of pump, bore well and any combination of tanks. Application: The product is suitable for almost all site conditions water tank for maintaining level automatically, can be used to control water inflow or outflow, by means of direct pump control or acting as a control switch of a magnetic or combination stater. Sutable for mono block pump (sump motor)sump submersible pumps.Jet Pumps, etc… This Water level controllers Indicator is highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc.At large our systems not only help you but your neighbors and society, also as it reduces the wastage of water by cutting down any further overflow than what you need.

Pearl is a semi-automatic model which suites for automatic OFF operation only.The pump must be switched ON manually. Both single & double tank sensing available control top tank or bottom tank. Available Indications Power On Pump ON Tank Full Sump Empty This model is suitable for Single Phase Borewell Pump 3 Phase Borewell Pump 3 Phase Monoblock Pump 3 Phase openwell Submersible pump

AWLC 01- Dual Motor Change over   Advanced Water level Controller (Auto Change over) Dual Pump operation Control Sump (open well) pump as well as bore well pump with automatic changeover technology To suit where both the motors are used to pump water to Common overhead tank (Single Tank) Three Modes of operation. Open Well (sump) mode Bore well mode. Automatic Change Over Mode (Dual Mode) Four stage water level indicator for over head tank, Three stage water level of sump Water flow indication(Running Line), Over and under voltage level indication and protection By Pass facility in case for direct operation. Manual Soft Touch ON / OFF Support both Single Phase & Three Phase connection Easy integration with control panel Open Well (sump) mode When water in the sump tank gets below foot value level or the over head tank gets full, it automatically switch off the openwell pump to prevent electrical power loss , water wastage and dry run. Borewell mode When the water in the overhead tanks gets full , it automatically switch off the submersible pump to prevent water wastage and electrical wastage. And it has also feature to prevent dryrun incase there is no water in bore to prevent submersible motor damage. Buzzer and visual indication is provided for dry run.Automatic Changeover mode (Dual Mode) When there is water in the sump the system works on sump mode, when the Water in the sump tank gets below foot value Level it automatically switch over to the Bore well Mode. If the water gets filled in the sump tank the system Resumes back to Sump Mode. This system is suitable where both sump motor & bore motor are used to pump water to a common overhead tank. The system every time checks for available of water in the sump and controls sump motor as first choice. If and when sump becomes dry, the system will automatically changeover to bore well motor. The system can be upgraded into “Multi-tank control system” to maintaiin water level in several overhead tanks.

Product Specification   WATER LEVEL CONTROLLER. MAKES WATER PUMP AUTOMATIC. Pump will start & stop by itself as per empty & full level of the tank. Level sensing can be done by..... a) probe sensor either metal washer or a screw or nut, based on conduction principle or.... b) CARBON TYPE probe sensor based on conduction principle ( sensor will be supplied on demand ) or.... c) MAGNET SENSORS which are rust free, electric shock free & there will be no salt deposition on it and based on NON-CONDUCTION            principle ( sensor will be supplied on demand ) IF YOU ARE  USING WATER PUMP? THEN MANY A TIMES. - Tank gets overflow..... Wastage of water and electricity. - Tank gets totally empty as you have forgotten to switch ON the pump. - You have to climb up above to the tarrace to see the level of water in the tank. .....TO GET RID OF ALL THESE.....JUST  USE.....AUTO FILL # AUTOMATICALLY  STARTS & STOPS PUMP.  # DISPLAY: ON-OFF STATUS OF THE PUMP &  EMPTY-FULL LEVEL  OF  UPPER & EMPTY LEVEL OF LOWER TANKS.  # FACILITY OF  FULL AUTOMATIC,  SEMI AUTO  & MANUAL CONTROL. # SAVES WATER & ELECTRICITY. MODEL AVAILABLE FOR........... a) NORMAL PUMP up to 1.5 HP b) NORMAL PUMP from 1.5 to 3.0 HP c) Open well submercible pumps up to 1.5 HP  d) Open well submercible pumps from 1.5 to 3.0 HP  e) Dip well Submercible well submercible pumps up to 2.5 HP  f) 3 phase pumps with direct on line starters g) 3 phase pumps with star delta starters.