Divine Impex Dared, Jamnagar, Gujarat

Water main Bond is used for bonding tape to large diameter pipes

U bolt Rod to Cable Clamp GUV are made from high copper content alloy for the connection of the earthing rod to cable. Corrosion resistance, conductivity and mechanical strength in clamp design is used to ensure the earthing system remains operative for many years.  

Tower Earth Clamp Single Plate are used for bonding copper and aluminum conductors onto steel surfaces. The clamp is fixed by drilling a hole in the steelwork and securing with the set screw provided.   Tower Earth Clamp Double Plate are used for bonding stranded copper conductors onto steel surfaces. The clamp is fixed by drilling a hole in the steelwork and securing with the set screw provided.

Test Clamp is used for connecting flat tape to solid circular conductor, for example where the lightning protection system has been designed in 8mm copper conductor but the connection to the earth rod is made using 25 x 3mm copper tape.It will also serve for making through joints and tee connections in 8mm solid circular conductor.   Flat Test Clamp is used to connect 8 mm diameter conductor to 25x3 mm conductor.   Square Test Clamp is used for forming end to end joints.

Tee Clamp is ideal for connecting the roof network to the down conductors of an 8mm solid circular lightning protection system.

Square Conductor Clamp are used as four-way connectors are suitable for making cross, straight through or tee joints in stranded copper conductor.

Straight Cable Lug is used for bonding copper and aluminum conductors to steel work

Square Tape Clamp is used for the inter connection of multiple conductors or for changes of direction which insure a low resistance, corrosion resistant connection. Square Tape Clamps are used for forming straight through, cross or tee joints in tape.   Fix Using Counter Sunk Wood Screw 1.5" X No. 10.

Square Rod Clamp are used as four-way connectors are suitable for making cross, straight through or tee joints in stranded copper conductor.

  Square Conductor Clamp are used as four-way connectors are suitable for making cross, straight through or tee joints in stranded copper conductor.

Square Clamp are used for forming either cross or tee joints.

Split Bolt are available in various sizes like: 10mm, 12mm, 16mm, Split Bolt are made from BS 2874 BRASS material, Split Bolt finishing is either Natural Brass or any plating as per customers requirements.

Screw down Test Clamp allows easy access to copper conductors where frequent inspection and testing may be necessary.

Rod To Tape Coupling enables the flat tape to be connected to the air rod. Used in conjunction with the side mounting air rod brackets.

Rod to Tape Clamp are made from high copper content alloy for the connection of the earthing conductor to earth rod. Corrosion resistance, conductivity and mechanical strength in clamp design is used to ensure the earthing system remains operative for many years.

Rod to Cable Clamp are made from high copper content alloy for the connection of the earthing conductor to earth rod. Corrosion resistance, conductivity and mechanical strength in clamp design are used to ensure the earthing system remains operative for many years.

Rod Brackets provide a 75mm projection from the building face and are used where it is not possible to fit a saddle onto the building roof. The brackets are used in conjunction with the rod to tape coupling used to secure the flat tape to the air rod.

Ridge Saddles are used to support air rods on roof ridges.

Re Bar Clamps are used for bonding bars, steam pipes, handrails, etc…

Plate Type Test Clamp is used to form a disconnecting joint between the down conductor and earthing system. There are two wall fixing holes on the bottom plate. Fix using countersunk woodscrews 1 1/2" x No. 10 and No. 10 wall plugs.  

Oblong Clamp is used in order to allow periodic disconnection and testing of the earth termination network, select a test clamp to be places within the run of each down conductor.

Metalwork Bond are used for connecting to all types of metal structures up to the thickness of 13 mm.