PIR Sensor Dealers

Features: 180 Degree-Wall mount,micro motion detectable.  Photo sensor inside for smart control  Run-on time adjustable Ambient lux, setting adjustable 2000 W / 625 W loading Can Support IR remote Control also for On/ Off / Auto Control Detection range: 6m for micro motion @2.5height and 12m for walk across motion@5 height Warm up time: Approximately 1minute Output: Relay Size: 91(L)x63(W)x87(H) mm With IR Remote Weight:137gms

Compact 16 Zones. LED Display, Automatic Code Learning Technology, Home appliance switching facility. Built in Key Board, Alarm Time can be set, Built in Siren.All our systems have the facility to arm and disarm infrared separately. So you can arm the system but disarm infrared, if you think so, when you are within the homeofficeshop.

A NEGAVEEZ PIR Motion Detector offers security and convenience in the areas that they cover. Motion detector is an intelligent device which detects IR Rays emitted by Human Body and controls the ON-OFF operation of electrical loads. The Electrical Loads can be Lights, Fans, Air Conditioning Units for Energy Saving Application or Siren, Buzzer along with Lights for Security Application. When it detects human movement within its detection area, it automatically turns ON the load. The Loads Continue to be ON till the time Human Movement is detected. The Loads are turned OFF after preset time delay if no movement is detected within the set time. It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient lightings along with security.   TECHNICAL SPECIFICATIONS: Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection DC 12 V/24 V versions are also available*** PIR Sensor: Dual Element Pyro Electric Sensor Time setting: Min 30 sec to Max 30 min to turn OFF loads after the last detected motion. Default time is 30sec. LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control on electrical loads during DAY Light, PARTIAL Light and NIGHT condition. Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load. For AC Control Use Additional Contactor of Suitable Rating. Sensor warm-up time: 1 Minute Sensing angle: 140 degrees Sensing distance: 10-14 Meters Operating Temperature: -10oC to 50oC Protection class: IP55 Enclosure is protected from environmental conditions that are water and dust. EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players. Over Current & Short Circuit Protection by an external replaceable fuse In built Protection circuit for lighting loads Provision for Dry Contact Output Terminal available RELAY- NO/NC/COMMON ***

This product is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and SMT; It gathers automatic, convenient, safe, energy-saving, practical functions; It has wide detection range made up of up and down, left and right service field; It utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install and its usage is wide; It has the function of power indication and detection indication.

We are offering pir motion sensor. Pyroelectric device that detects motion by measuring changes • detection range up to 20 feet • compatible with all microcontrollers • ideal for alarm systems, motion-activated lighting and robotics application.

WIRED DOOR SENSOR The Honeywell 951WG is a miniature recessed contact with 12” wire leads. You can use the 951WG recessed contact to protect doors and windows from intrusion. As the included magnet is only 3/4” long, the 951WG is ideal for windows and doors that have a thinner frame such as casement windows and sliding windows. You can order the miniature recessed contact in your choice of white (951WG-WH) or brown (951WG-BR).

Occupancy Sensor for Laboratory and R&D centre. LuxMaster BLS [Ceiling mount PIR Occupancy Sensor] Type : - 360° Presence / Occupancy Sensor Application : - Laboratory and R&D centre Technology : - Ceiling mount Passive Infrared PIR occupancy sensor Reach : - [Walking Movement]: 12 meters Fine Movement Range : - [Sitting Position] : 4 meters Time Setting : - 4 - 30 Minutes Lux setting facility : - 20-1300 Lux Load switching : - 1000 W uncorrected inductive loads like fluorescent lamps/tubes with electronic ballasts - 230V AC 50Hz Switching Zones : - Very sensitive with 1320 switching zones Other Properties : - Sensor continuously monitors the lux level to keep the loads on / off. http://www.occupancysensor-motionsensorlights.com/laboratories.php