jamshedpur equipments Sonari, Jamshedpur, Jharkhand

Esenpro Worm Speed Reducers are compact, enclosed and are sturdy constructions combining rigidity and strength. Esenpro Standard Fan Cooled Worm Speed Reducers are made from 11/8" centers to 24" centers and the ratio ranging from 10/1 to 70/1 and Horse Power Capacities up to 200 H.P.  

The WINNER range has been designed to enable advanced control over a wide variety of applications. Its design allows the highest amount of features a radio remote control can have. The transmitter, with 10 double speed pushbuttons has 5 status leads, which display either the system status or special functions. Its design allows the possibility to incorporate the latest technological advances such as the infrared system (IR) or the Intelligent Changing Frequency Management (GCFI). The manufacturing process includes using new durable materials which provides the equipment with a greater resistance either to weather conditions or to possible impacts.  

Operates the control change-over the contacts of a motor of a moving equipment when a cam moving with loads actuates the lever / (or the weight rests on a surface) of the Limit Switch. This turns the cam on a square shaft and operates the NO / NC change over the contact elements. Grab Differential Limit Switch Is driven by holding and closing winches Is used in auxiliary circuits for single lever grab control. It is used for stopping the closing motor after closing or opening, regardless of the height of the grab and starting the holding motor after closing, for the transition to the hoisting action as well as for stopping the holding and closing motors at hoisting and lowest grab position.

Variable Speed Pulley Drives convert any standard constant speed motor to a variable speed instantly, accurately, smoothly & while the machine is in motion. It also helps to stop the shaft instantly without damaging or giving jerk.  

V-Belt Pulley Or V-Groove Pulley. This Pulley is also known as aara or Light weight Pulley. This is used to transmit power for low weight. These are normally used where rotation is less and moving part connected to output shaft is very light. Pulleys are made from normally cast iron.  

Universal joint shafts from a driving machine to a driven machine and can accommodate a high degree of misalignment. Reliability and efficiency is our top priority. Our product portfolio includes: Custom made high-performance universal joint shafts Standard universal joint shafts Center sections with fixed lengths with telescopic length compensation with roller-bearing length compensation (tripod shaft) made of steel or carbon fiber reinforced polymer (CFRP) Connection technology Shaft support systems (spindle support/spindle balance, roll end sleeve support/huggers etc.) Voith universal joint shafts ensure productivity and reduce maintenance costs. The torque capacity extends beyond 20,000 kNm (14 million lbf ft).

Uncoiler and Recoiler are special gear units used in Steel Industries. They are foot mounted, multiple stage helical gear units with a special output shaft. Tech Specification ETR/750/S/SP OR DTR/750/S/SP High load carrying capacity bearings are incorporated to withstand loads during coiling, reeling and tensioning Custom built up to 2500 KW with increaser /reducer requirement 17CrNiMO6 Gears ground to an accuracy of DIN 5/6 quality with 60 +/- 2 HRC

The TUNNER range of Radio Remote Controls incorporates within its compact size all the functions of a basic radio remote control. The compact yet rugged transmitter has 7 double speed pushbuttons and an emergency stop. It has been designed to suite most industrial applications. As a standard, its design incorporates the advanced feature of Intelligent Changing Frequency Management (GCFI). The manufacturing process includes using new durable materials which provides the equipment with a greater resistance to either harsh weather conditions or possible impacts.

Timing Pulleys are widely used in various equipments where timing of both the drive are precious and the display ratio is important. Advantage of timing pulley is to eliminate slippage and to maintain Constant Angular velocity. Timing Pulleys are manufactured as per ANSI / BS standard with Carbon Steel / Alloy Steel / Aluminium with Hardened teeth to provide long life.  

  Thruster brake is a device to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a pre-stressed compression spring. The shoes press on the rotating brake drum retarding its speed, and finally stopping it. The releasing of the brake and compressing of the spring is done by thruster.

Pulleys having Taper bush are normally known as Taper lock pulley.They eliminate re boring and key waying problems. Changing Taper lock bush changes diameter of shaft and position of pulley. we can make above pulleys from single groove to multiple grooves in various sections like a,b,c,d,e. or custom designs  

Taper Lock Bush is the changeable part in Taper Lock Pulley. Over a period of time shaft damages center part of Pulley and whole pulley needs to be replaced...but using taper lock bush pulley can be reused. It also reutilises the taper lock pulley by just simply changing taper bush of the pulley and saving the cost of entire pulley.  

A series of pulleys of various diameters combined in a single concentric unit is knows as step pulley and used to vary the velocity ratio of shafts. Step Pulley is used where variations are required from slow rotations to high rotations with change of torque. It is also known as cone pulley.  

SCREW SERIES couplings are suitable for all those heavy duty applications characterized by pressure and flow peaks and possibility of connection and disconnection under residual pressure. Threaded connection ensures a wider contact surface in the mating area with consequent higher resistance to pressure peaks, hoses bending and vibrations . Applications Hydraulic tools for rescuing Hydraulic tools for agriculture machines Hydraulic tools for forestry machines Hydraulic tools for earth moving machines Hydraulic tools for road machines Hydraulic systems for special vehicles

Safe Lift Pendant Push Buttons are ideally used for small hoist applications, for control circuit in both single and double row versions, for control and direct switching power circuits & for tail lift controls. Available in both single & double speed versions and also in vertical (single row) and horizontal (double row) types. Speed-O-Controls is manufacturing more than 25 different versions of Pendant Push Button Stations. Basic feature include: Double insulated enclosures in thermoplastic self extinguishing material (ABS) Version available from 2 push buttons up to 14 push buttons on horizontal and vertical type Adequate cabling space Ease of use due to light and user friendly function

Rotary Geared Limit Switch GRLS is used to trip motor supply when the moving load reaches the extreme end positions of working zone. The driving motion is transmitted by worm gear through worm shaft. The rotations and movements are transmitted to switches by adjustable cams. Worm Drive Limit Switch FGLS are suitable for use on reversing drives, such as Hoists, Cranes, Winches, Rolling Mills, Theater Curtains, Coke Oven etc. The driving motion is transmitted by worm gear. All gears and hubs are made of low wear thermoplastic material. The rotational movements are transmitted to switches by adjustable cams. Limit Switch LSR Cross Rotary for travel Motion Operates the control change over the contacts of a motor of a moving equipment which when operates with a load a actuates the 300mm rods of the Limit Switch and this in turn operates the NO/NC change-over contact elements.

Special Mill Drive Gear units cum Pinion Stand. Used in Cold roll Mills. The Gear unit consists of a single input shaft with two vertically offset output shafts. Tech Specification MGU/ 610+500 Used in Cold Rolling Applications Designed to withstand high impact loads during rolling operations. Built as per Customer Requirements

Roller chains are used in basic power transmission...Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute. Roller chains runs on simplex sprocket. The roller chain design reduces friction compared to simpler designs, resulting in higher efficiency and less wear. We offer precision roller chains from 3/6\" pitch to 4\" pitch with BSA/ASA standard at most competitive price.  

P.I.V. ( Positively Infinitely Variable ) Chain links contains packs of hardened steel slats which slide freely from side to side to conform with grooves in the wheel faces. This unique self forming tooth capability results in positive no slip transmission and long chain life. PIV Chain is mostly used in PIV Gearboxes.  

When it comes to oil skimming solutions, the Oil Skimmers Model 6V Brill™ oil skimming system is the dependable, cost-effective and uncomplicated solution for removing oily waste from water during the manufacturing and waste treatment process. The Oil Skimmers Model 6V waste oil recovery system removes animal, vegetable and petroleum-based oils, fats, greases, and oily wastes that float on the surface of water or other liquids. The unit removes as much as 100 gallons of waste oil per hour, and discharges it into a drum so efficiently that the recovered waste oil is virtually water-free. Features and Benefits   Closed-loop collector tube floats on water surface Collector tube performance is unaffected by any floating debris Tube easily floats up or down to adjust to changing water level Gyrating action of collector tube breaks up oil crusts Virtually maintenance-free operation Unique anti-clogging design Cast metal housing and structural members High performance, quiet-running motor Can operate unattended 24/7 Up to 30-year operating life How the Model 6V Works At its simplest, the Oil Skimmers Model 6V Brill™ waste oil recovery system separates oil and water using a specially formulated collector tube:   Oil adheres to the outside of the floating closed-loop tube as it is slowly drawn across the surface of the water and into the oil skimmer. Unlike other skimmers, which can get clogged by floating debris, the tube skimmer snakes over and around floating debris, adjusting automatically to changing water levels. The tube is then drawn up into the oil skimmer and through scrapers that remove the oil. The tube then returns to the water surface to collect more oil. The recovered oil flows into a collection container. To see the Model 6V in action, visit our Oil Skimmers video page. In addition, you can view the Model 6V spec sheet, or get more information about a specific application such as, military vehicle wash racks. The Expertly Crafted, Customizable Oil Separation Solution Engineered for headache-free operation, the external parts of the Oil Skimmers Model 6V Brill ™ unit – the drive wheel, scrapers, and pressure blocks – are made of high abrasion-resistant ceramic. Gearing is engineered to require minimal power and maintenance, and sealed in a cast housing to protect them from conditions found in and around a skimming environment. Its thoughtful design and durable construction ensure the Model 6V Brill ™ system an operational life span of 25 to 30 years. Many units have been in service for more than 30 years and are still going strong. The Oil Skimmers Model 6V Brill ™ unit waste oil recovery system has been designed to operate continually and unattended as it separates animal, vegetable, and petroleum-based oils, fats, and greases floating on the surface of water. Mounting equipment options increase its versatility, plus prefabricated mounting packages further extend the Model 6V system’s flexibility. These packages simplify placement of the system on pits, sumps, ponds, and open or closed tanks, thus eliminating costly operation. With experience in over 25,000 applications, our experienced representatives are available to survey your oil removal needs and design a system to meet even the most challenging waste oil removal problem. Model 6V Typical Applications Model 6V oil skimmers are at work in thousands of applications worldwide. A sampling includes: Machine/Metalworking Wastewater Treatment Disposal Sites Heat Treating Steel Producing Chemical Processing Poultry Processing Metal Processing Automotive Parts Food Processing Fuel Distribution Metal Office Furniture Power Generation Heavy Equipment Wash Base Any other application where waste oil is a problem No matter what your application needs, Oil Skimmers Inc. has a system that will manage all your waste oil recovery efforts.

Master Controller is housed in an enclosure and provided with an easily removable cover with ample area for maintenance. The cam shaft is mounted on bearing bushes on the walls of the housing. They are made of delrin material and fixed on square spindle switch which are moved by a handle. The cams are cut according to the switching program. Dual Master Controller with one universal handle allows a crane operator to control both bridge and trolley motions with one handle. Simultaneous operations of bridge and trolley motions are provided for greater sporting accuracy and faster movement of loads.  

Large Pitch Conveyor Chain are designed to carry heavy loads and endure rough loading. Large pitch conveyor chain is designed to operate in harsh conditions. The chain is designed with relatively large clearances between components. Attachments are high in strength to carry load between large spaces.  

Small dimensions. The differences due to expansion are absorbed in every joint of the line. It is not required to place special expansion joints. To extend an existing line is very easy just by adding new tracks. Quick mounting: in one pass the line is ready to work The electric feed can be done at the beginning of the line or at every joint of the line. It is very easy to change a track already assembled without moving the rest of them. Working voltage: up to 600V Working temperature: from -30ºC to +55ºC Degree of protection: IP20 (without rubber sealing). IP 23 (with rubber sealing)

The honey comb Chain/Belt are constructed from cross rods and a flat metal strip. At the sides of the belt the cross rods have a welded ring (welded edges). The honey comb Chain/Belt is positively driven by sprockets, and can be used in conveyors. It is used in Ovens, washing, cooling, drying, sorting, & bread production systems.