Willworld Engineering Corporation Souter Ganj, Kanpur, Uttar Pradesh

Thermic Fluid Heater   Multifuel Concept : Guaranted output on low grade coal and lignite with GCV upto 3800 Kcal/Kg. Agricultural Wastes such as rice Husk, Bagasse, Groundnut shell, Saw Dust etc.   Highest Efficiency : The combustion chamber dimension and grate area are suitably designed for maximum combustion efficiency on low grade fuel. This system is easily accessible and large heating surface of Thermo Energy Systems heater and air pre-heater assures on unmatched efficiency f76%(on GCV of coal having 5000kcal/Kg.)   Low Power Consumption: Unique design of Thermo Energy Systems heater ensures lowest power consumption over any other competing system available today.   Availability: Against Order   Product Description Details   Absolute Safety: External Combustion chamber ensures longer life of heater coil and thermic fluid. No radiation energy is transferred to heater coil in case of power failure ensuring complete safety. Diesel engine driven pump is not required for Fluid tech heater as compared to vertical systems.   External Furnace: Coal/Lignite is burnt in an external furnace which results in an elimination of any possible hazard to the thermic fluid heater coil. A flue by-pass system is attached for the protection against power failure.  The entire furnace is provided with steel casing and the combustion chamber is constructed with best quality high heat duty fire bricks and insulation bricks. Mineral wool insulating panels help minimum heat loss.   Safety Controles and Instrumentation : Digital Electronic indicator cum controller forward/return temperature for ID fan off. Electronic stack temperature controller shuts of the unit in case of  abnormally low temperature. Electronic low level controller in expansion cum deareated tank shuts off  the unit in case of low thermic fluid level in tank. Electronic forward high temperature safety controllers shuts off the unit case forward temperature exceeds than minimum recommended temperature. Differential pressure switch shuts off in case of abnormal fluid flow  conditions. Pressure gauge for inlet pressure measurement. Pressure gauge for circuit pressure measurement. Audio visual alarm for abnormal operating conditions.   Optional Features : Coal cum oil firing system to change over from one fuel to another with minimum down time. Automatic by-pass damper with electromagnetic or pneumatic device. Modulating damper or variable speed drive to control combustion under all operating conditions.

Number Of Flower : Thermic Fluid Heater

Shell And Tube Package Boiler This boiler is generally used to generate high steam-pressure required for process heat operation in industry. It is also used for saturated steam applications, which demand uninterrupted operation on solid fuels. This boiler is rugged and can operate continuously throughout the year. In addition, since it has small water content, it responds rapidly to changes in loads and heat inputs. Availability: Against OrderThis boiler is generally used to generate high steam-pressure required for process heat operation in industry. It is also used for saturated steam applications, which demand uninterrupted operation on solid fuels. This boiler is rugged and can operate continuously throughout the year. In addition, since it has small water content, it responds rapidly to changes in loads and heat inputs.   Availability: Against Order   Product Description Details Multimax is a single pass, smoke tube, boiler that can fire different types of fuels like coal, husk, bagasse and wood. It is designed to provide low cost heating using agro based fuels. The firing system can be modified for burning multi-type fuels. The horizontal stationary grate is used for firing fuels like coal, wood and bagasse bales, whereas loose fuels like bagasse, husk and other agro wastes, are either fired on inclined grate or pneumatically, spread on a fixed grate. The furnace is also external to the boiler to enable combustion of high moisture agro-fuels like bagasse.

Number Of Flower : Shell And Tube Package Boiler

Material : Steel

Specialities : High Steam-pressure Generation, Suitable For Solid Fuels, Rugged Design, Rapid Response To Load Changes

Industrial Hot Air Dryer Industrial Fabricators manufacturers direct and indirect type Hot Air Generators. The hot air generators are used for obtaining hot processed air for Dryers, Ovens, Spray Dryers and various other applications.   Direct fired HAG are designed for temperature upto 900°C, whereas Indirect fired HAG have temperature upto 400°C The burners are equipped for variety of fuels like Liquefied Petroleum Gas (LPG), Natural Gas (NG), Furnace Oil (FO), High Speed Diesel Oil), Light Diesel Oil (LDO) and Kerosen.     Availability: Against Order   Product Description Details Our firm is a leading name, which is engaged in delivering Industrial Hot Air Generator to respectable clients. The offered range is available with 3 pass design and external furnace construction with FBC firing system.   This range also comprises indirect HAG with SS tubes that are ideally used in clean hot air requirements in pharmaceutical and food industry. In addition to this, offered products are also useful for direct hot air generator for ceramic industry and other spray dryer .   

Number Of Flower : Hot Air Generator

Material : SS Tubes

Specialities : 3 Pass Design, External Furnace Construction, FBC Firing System

Usage : Industrial

Hot Water Generator Hot Water Generator: Indotherm manufactures hot water generator upto the range of 50,000 to 90,00,000 kcal per hour. The hot water boilers are designed to operate on various types of fuels such as heavy oil, light oil, gas, duel fuel, coal, husk and other agro waste fuels. We manufacture three types of hot water boilers at our unit, they are Aquamatic, Aquatherm and Thermocontainers.     Availability: Against Order   Product Description Details We offer Energy consultancy services for green field projects or for reengineering existing plants. Companies can make use of energy conservation measures that follow best industry norms. The services cover the following utilities – boiler house and steam distribution system; thermal oil systems; chilled water and compressed air systems. Selection of equipment. Complete piping and insulation design. Design of condensate recovery systems. Selection and sizing of pressure reducing stations. Design of waste heat recovery systems. Greenfield projects. Re-engineering of existing plant. Present system hookup with new plant. Complete turnkey execution for piping. Commercial complexes. Hotels Hospitals Industry Institutes IT parks Laundry

Number Of Flower : Hot Water Generators

Range : 50,000 To 90,00,000 Kcal Per Hour

  Hybrid Steam BoilerThis boiler is generally used to generate high steam-pressure required for process heat operation in industry. It is also used for saturated steam applications, which demand uninterrupted operation on solid fuels. This boiler is rugged and can operate continuously throughout the year. In addition, since it has small water content, it responds rapidly to changes in loads and heat inputs. Availability: Against Order   Product Description  CONSTRUCTION   HYB boiler is very compact and package design which reduces the cost of installation and commissioning. Complete accessibility to water and smoke tubes reduces time and cost for cleaning and maintenance. Large furnace volume permits a shallow bed of fuel and allow ample residence time for thorough mixing of fuel and air ensuring high combustion efficiency.    The HYB boilers offered by us are made as per the latest IBR Regulations. Stringent quality control is observed at every stage of manufacture right from raw material stage to testing of boiler prior to dispatch. The pressure parts are manufactured from Boiler Quality Steel, fully welded construction, shell radiograph and hydraulically tested.    One steam cum water drum which incorporates the smoke tube bank. A water tube wall is provided at the side of the furnace to form a water wall seal. Headers are provided at the bottom along with down comers to form a natural water circulation circuit. A convective evaporator section is so designed as an inline arrangement.    FLUE GAS PATHS:  The boiler consists of a configuration enabling high turn down ratios. The combustion ones completed is released in to the free board zone at a temperature slightly higher than 1200°C. The water walls absorb the heat before leading the gases into the smoke tube boiler section (convection bank). The flue gases are than taken into an heat recovery unit, cyclone dust collector, I.D. fan and into the chimney.   

Number Of Flower : Hybrid Steam Boiler

Material : Boiler Quality Steel

Purity : Compact Design, High Combustion Efficiency, Rugged Construction

Application : Industry