Polyethylene Pipe Dealers (164 products available)

We are offering pe pipes. Our range of pe pipes (polyethylene) consists of hdpe pipes mdpe pipes plb hdpe ducts (permanently lubricated with silicon coating) spinkler pipes suitable for water supply and sewerage distribution.

• Material: PEX
• Shape: Round
• Application: Fittings
• Thickness: 40-50mm
• Finishing: Polished
• Feature: Crack Proof, Excellent Quality, Fine Finishing, Perfect Shape.

With our technical expertise in offering excellent quality Pex Pipes Manufacturers, we have become one of the prominent Manufacturers in our domain. Fabricated with high grade raw materials by utilizing modern technology, our PEX Water Pipes are available to us at economical prices in different sizes, dimensions and breadths as per the technical requisites of our clients. Consequently, we are one of the well-known Exporters based in India. Our long lasting PEX Plumbing Pipe offers smooth and efficient flow characteristics owing to its perfect finishing. Since these pipes are light in weight, thy can be easily carried, transported and installed at the desired destination. Moreover, these pipes are recognized for their excellent resistance to corrosion and chemicals. Application Superior chemical and environmental stress crack resistance. IPS sizes 1/2" to 2" for use at temperatures up to and including 90oC. Pressure rating varies to sizes of pipe at various temperatures as per table given below .Highly resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens. Ideally suited for potable water plumbing applications. Scope Outlined specification ASTM 2447 (Dimensions only). This pipe is intended for use in applications where the fluid conveyed does not exceed 90oC. PE Materials The material used in the manufacture of the pipe shall be domestically produced as well as imported form reputed manufacturer�s High Density Polyethylene with cross link agent (catalyst) and UV Stabilizer. Dimensions PEX Pipes shall be manufactured in strict accordance to the requirements of ASTM D 2447 (Dimensions only) for physical dimensions and tolerances. Fitment (Threaded) as per BSPT Standard. Each production run of pipe manufactured in compliance to this standard, shall also meet or exceed the test requirements for materials, workmanship, hydrostatic pressure, density, temperature test, tensile strength etc. Unique Features Suitable for all weather condition. Lower thermal conductivity, hence lower heat loss. Common Pipes & Fittings for both COLD AND HOT water. Light weight, flexible and hygienic pipes & fittings. U. V. Stabilized. Easy to Install, repair and replace. Leak free joint with Teflon tape. Suitable to use up to 90�C (194�F) Also works in freeze conditions. Application Superior chemical and environmental stress crack resistance. IPS sizes 1/2" to 2" for use at temperatures up to and including 90oC. Pressure rating varies to sizes of pipe at various temperatures as per table given below. Highly resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens. Ideally suited for potable water plumbing applications. Scope Outlined specification ASTM 2447 (Dimensions only). This pipe is intended for use in applications where the fluid conveyed does not exceed 90oC. PE Materials The material used in the manufacture of the pipe shall be domestically produced High Density Polyethylene with cross link agent (catalyst) and UV Stabilizer. Principal material used is PE of Reliance Industries Ltd. Dimensions PEX Pipes shall be manufactured in strict accordance to the requirements of ASTM D 2447 (Dimensions only) for physical dimensions and tolerances. Fitment (Threaded) as per BSP STD. Each production run of pipe manufactured in compliance to this standard, shall also meet or exceed the test requirements for materials, workmanship, hydrostatic pressure, density, temperature test, tensile strength etc.

• Shape: Round
• Thickness: 40-50mm
• Feature: Crack Proof, Excellent Quality, Fine Finishing
• Dimension: 300-400mm
• Wall Thickness: 2 – 7
• Pressure Class: Up to 100 Bar.

Clients can approach us for placing orders, timely deliveries of the same are guaranteed with us. We have massive warehouse with Individual stock keeping units (SKUs). We are capable of sorting the products in an efficient way and can easily entertain bulk requirements of the customers.   Size : 1/2" 3/4" 1"

Quality being the prime concern of the company; it keeps a strict check on the production, packaging and delivery processes. Serving the customers with the exceptional range of High Density Polyethylene Pipe, we are well-recognized Suppliers in the field.

• Brand Name: Kunststoff
• Material: Polyethylene
• Outer Diameter: 20-80 mm
• Single Piece Length: 6 to 12 mtr
• Color: Yellow

We are main exporters and suppliers of this product.

we are offering parixit polyethylene pipes. range dia: 20 mm to 1000mm od, 2.5 kgcm2 to 16 kgcm2 standards is: 4984, iso 4427, din 807475 grade pe 63, pe 80, pe 100 colour black with blue stripes

• Brand Name: Sarovar
• Standard: IS : 4984

HDPE pipe as per IS:4984 & IS:14333 standards Polyethylene formed by the polymerization of ethylene, are tough, waxy materials of varying flexibility. For pipe applications, they are generally formulated to screen out ultraviolet radiation in sunlight. Polyethylene pipe products are protected against deterioration from exposure to ultraviolet light and weathering. Black pipes contains 2 to 3% carbon black to protect them from UV deterioration.

• Application: Plumbing, Drinking Water
• Material: Polyethylene
• Pressure Rating/PN Class: PN 4
• Size/Diameter: 1/2 inch
• Single Piece Length: 3 meter
• Product Type: Roll

Polyethylene Composite Pipes 01, Polyethylene Composite Pipes

Pe100 orange pipe for gas distribution confirming to is-14885 iso-4437.

• Material: HDPE

Polyethylene Pipe that we offer is manufactured using highly advanced techniques under the supervision of experts. It is joined with another pipe with the help of heat fusion method or mechanical fitting. It is made available by us in many styles and types so as to fulfill varied requirements of the buyers. We conduct stringent quality tests on Polyethylene Pipe so as to ensure that only the defect-free product reaches the customers’ end. We are named among the renowned Manufacturers and Suppliers of Polyethylene Pipe. We have the capability to deliver retail as well as bulk orders for Polyethylene Pipe within the stipulated time frame.   Installation Method : Polyethylene & Polypropylene pipe or fittings are joined to each other by heat fusion or with mechanical fittings. Plastics may be joined to other materials by means of compression fittings, flanges, or other qualified types of manufactured transition fittings. There are many types and styles of fittings available from which the user may choose. Each offers it's particular advantages and limitations for each joining situation the user may encounter. Contact with the various manufacturers is advisable for guidance in proper applications and styles available for joining as described in this document. There will be joining methods discussed in this document covering both large and small diameter pipe.   Application : Water Treatment Food & Beverage Water and Gas Utilities Shipbuilding   Advantages : Outstanding Flexibility High Impact Resistance even at very Low Temperatures\ Safe and Easy joining by welding Excellent cost-Performance ratio

Polyethylene is a thermoplastic polymer consisting of long chains produced by combining the ingredient monomer ethylene. The ethylene actually converts to ethane as it takes its place in a polymer and straight sections of the polymer are the same structure as the simple chain hydrocarbons, e.g., propane, decane and other straight single-bonded carbon chains. As with any polymer, the structure of the resulting substance defies molecular description due to cross branching of the chains. HDPE (High Density polyethylene) is defined by a density of greater or equal to 0.941 g/cm3. HDPE has a low degree of branching and stronger intermolecular forces and tensile strength.       

Polyethylene pipes, High Density Polyethylene is a thermoplastic Polyolefin material generated from the polymerization of ethylene. It is manufactured in petrochemical plants with petroleum as the raw material. Depending of the polymerization process, different types of polyethylene materials are obtained. HDPE, with a density of 0.94 ̴ 0.96 gcm³ is manufactured at low pressure. Several modified copolymers have been developed in recent years. A recently developed grade, often termed as PE 100 with a density of 0.95 ̴ 0.965 gcm³, has significantly higher strength properties than normal HDPE. It is especially designed for the production of larger diameter & thick walled pipe, but can be processed for the whole range of diameters. It also shows excellent resistance to rapid crack propagation and slow crack growth.

• Brand Name: NANDI GOLD
• Material: LDPE
• Shape: Round
• Feature: Good Quality
• Density: Low Density
• Type: Polyethylene Pipes,LDPE agriculture pipe
• Country of Origin: India

We offer polythene pipe. All product is available in our company and all size

• Brand Name: Sangir
• Material: PE
• Place of Origin: Maharashtra, India
• Standard: ISO 4437 or ASTM 2513

We offer PE Gas Pipes and EF Fittings to our customers. The coils of PE Gas Pipes are available for sizes up to 110mm. Our PE Gas Pipes come with diameters ranging from 20 mm to 560mm, PN 2.4 to PN 5. Our PE Gas Pipes qualifies ISO 4437 or ASTM 2513 certification. We offer the largest PE Gas Pipes up to 22” in India as per ASTM Standard ASTM 2513.

We hold expertise in manufacturing and supplying sturdy Polyethylene Pipes. Fabricated using high quality polyethylene plastic and ultra-modern technology, our pipes are appreciated for durability, high strength, abrasion resistance, etc. We offer our Polyethylene Pipes in different sizes and diameters to meet the specific application requirements of the buyers. Obtain from us, Polyethylene Pipes in bulk and at the most competitive rates.

• Size: 1-10ft, 10-20ft, 20-30ft
• Type: PE Pipe
• Material: Cement, Concrete
• Application: Toilet, Water
• Standard: GB
• Warranty: 1 Years

Steel Reinforced PE Pipe is a NEW KIND of high density polyethylene pipe which is reinforced by steel wire. Steel wires are copper plated, with every cross of steel are spot welded as a net-cylinder structure. HDPE, the stuffing material, is continuously extruded on producing line. The structure is like a reinforced concrete. Advantages over normal HDPE pipes : Longer life & cheap over complete life cycle At the same pressure class SRPE will have thinner wall thickness Lightweight Less support required Fast & cheaper Installation cost. Resist temperature up to 900 C which is higher than normal HDPE Product Description Steel Mesh Reinforced HDPE Pipes (PE) & Fittings (SRPE) Size - 2 Inch to 24 Inch Dia. (50 mm to 600 mm) Pressure Rating - PN10 to PN40 Metal Reinforced Spiral Corrugated HDPE Pipes (PE) Size - 12 Inch to 100 Inch Dia. (300 mm to 2200 mm) Pressure Rating - PN2 to PN10

• Usage: Home, Hotel/Restaurant
• Standard: ISO 4437, Conforming 14885
• Available Grade: PE-80 Yellow, PE-100 Orange, PE-80 Black
• Available Standard: ISO 4437, Conforming 14885

• Material: Polyethylene
• Application: Industrial, Commercial
• Thickness: 5-10mm
• Color: Blue
• Feature: Good Quality, Light Weight
• Size/Diameter: 3 to 25 mm

Catering to the voluminous and urgent requirements of our clients from Bhavnagar(India); count on us to avail the same We are a one-stop destination and the perfect place for purchasing excellence assured Prelubricated Polyethylene Pipes.

Prakash Agro Plast is recognized as one of the chief Manufacturers of PE Perforated Pipes among the rest in the market. The PE Perforated Pipes supplied by us are made from high grade Polyethylene. With diverse application in different industries, these PE Perforated Pipes are highly demanded by the clients. Attributes : Crack resistantSmooth inner surfaceBetter flow capacityHighly durable Applications : Telecom ductsSand coatingCable ductingWire ducting

Manufactured from virgin high performing special grade raw material PE-80 & PE-100. State-of-the art machinery producing high quality pipes. With Phase-I and Phase-II approval. Minimum required strength (MRS) of 8 MPa & 10 MPa. Suitable for working pressure up to 7.0 bar. Wide range starting from 20mm to 355mm OD. 50, 100 and 150m coils up to size 110mm. 6m length on all sizes above 110mm. Specification conforming to IS-14885 & ISO 4437 - SDR17.6, 13.6, 11 & 9. High resistance to chemical reaction. Light weight and flexible. Easy handling and jointing leading to reduced cost. Easy repair in the event of damage. No outer painting required. Very low maintenance cost. Very low friction. Outstanding ability to withstand Rapid Crack propagation (RCP). High resistance to Crack Growth. Very high abrasion resistances. Electro Fusion Fittings Tie-up with Fusion Provida, UK Fittings manufactured from PE-80 & PE-100 special grade raw materials Recognized by British Gas PIC, Australian Gas Authorities. DVGW-Germany and many gas authorities all over the world Wide range of fittings from 20mm to 355mm Universally adopted Pin-configuration to match with any EF welding machine Manual and Bar code-both options provided on each fittings. Operating voltage 40 ± 0.5V (other options available on request). Applications Natural Gas/ Vaporized LPG Conveyance and Distribution. Industrial Gases Distribution Landfill & Leachate Gas Extraction and Conveyance Gas distribution and water distribution systems. Jain Polyethylene Gas Pipe are suitable for Gas distribution network both for domestic & industrial consumption. PE-100 SDR 7 & 9 are suitable for use in cross country gas conveyance pipeline systems. The simplest form of electro-fusion jointing available. Robust construction and fully waterproof. The controller can be supplied with dual output voltage capabilities - 39.5 V and 24V. Simple step-by-step prompts lead the operator through the jointing process, ensuring that the operator follows the correct installation procedure. A Specially designed “Soft start” feature reduces shock loading on the generator. LCD display. Over 500 joints record can be stored. Full data retrieval system in-built which allows for complete joint histories to be recorded and retrieved. AM-85 Control Box is the latest EF fully automated welding machine from the House of Fusion, UK. One universal lead for either automatic or manual fittings Colour Coded lead ends indentifies mode of operation. Barcode Scanner or light pen options. Facia can be personalised for customer branding. Prompt after sales service easily available. Butt Fusion jointing is a method of joining PE pipes using thermal fusion. This technique permits the quick assembly of long continuous joints in a faster and economical way without the use of modified pipe end or couplers. The fused joints are reliable and as strong as the pipe itself thus providing total leak proof system. We also provide experience and skilled satff to conduct and supervise the jointing operations. Fusion Group UK has developed a new generation of automatic butt fusion machines under the name Gatar, the snappy performer. It incorporates improved design concepts making the machine more efficient and more robust.

We also supply polyethylene corrugated flexible pipe material: polyethylene properties: flexible and excellent tenacity, anti friction applications: machine tool, mechanical building, electric control system. standard colour: black

Range:Single Wall Corrugated (SWC) - Ø 63/52, 75/62, 90/77, 125/103, 200/173, 250/215 mm OD/ID Double Wall Corrugated (DWC) - Ø 63/51, 75/61, 90/76, 125/101, 200/172, 250/213 mm OD/ID Standards:IS 14930 (Part 2)-2001, TEC Spec GR/DWC-34/01 SEP 2007, EN 13476-1:2007 (E) Length:Available in straight lengths of 6/12 meters for all sizes and in coils upto 125 mm OD in different colours.Applications:• Power Cable Conduit & Telecom Cable Duct• Drainage & Sewerage Lines • Detention/ Retention Storm Water Lines• Agriculture/ Subsurface Drainage