Pharmaceutical Processing Equipment Dealers in Kolhapur

The machine is designed to carry out compression tests on materials like concrete, cement as well as finished products like tiles, bricks, blocks and other relevant materials. The machine can be used for quality control departments, civil test laboratories, engineering colleges And are adeally suitable for on-site testing for quality control and/or laboratories.   We Upgrade all types of imported testing machines like INTRON, ZWICK, TIRA, HONSFIELD,UNITED and Indian like FIE, FSA, STAR etc, with following advantages :-• Machine becomes computerized with digital load indication in kg / N / Mpa with real time graph on PC • Avoids tedious evaluation of proof stress. Gives 0.1 - 1% proof stress values & stress / stress graph• Plot of Load vs % elongation for elastic materials for rubber / plastic using our Long Travel Ext’meter• Highly accurate. No manual Intervention. Totally error free working.• Mechanical working ( with dial ) of machine remains unchanged and can still be used.Why MCS make Universal Testing Machines? :-• Up to date knowledge of all the latest Indian & International testing standards and ability to implement in the machines / software supported by  strong in-house R&D setup.• Future proof indigenously designed hardware/software, sensors, extensometer, control panel• State of the art manufacturing facilities supported by excellent after sales support• Installed our systems / packages in more than 40 NABL accredited Laboratories in India. We supply testing machines for testing of materials like steel, cement, copper & ACSR conductors, cables, polymers, rubber, insulators, ceramic, glass, plywood, fastners, wire / nylon ropes. We look forward to have an opportunity to serve your company in near future.Technical Specification :-Automatic Compression Testing Machine ( ACTM )Computer-controlled using EIA-485 communication standard. Online plotting of runs being taken by the ACTM Advanced data acquisition, analysis and report generation ACTM software tool with run database management.Digital Display Unit ( DPU )Dynamic display of pace-rate on a LED bar-graph for monitoring the quality of control. On-board memory for storing up to 250 runs. Auto-shutdown when the sample breaks or the maximum load is achieved. Independent LVDT attachment.Micro-Controlled CTM ( μCTM )Intelligent DSP-based Pace Rate Controller. Digital PID feed back control with high torque stepper motor as an actuator. Fully configurable feedback control parameters. Automatic Load Hold and Resume facility. Facility for user-defined pace rate in kN / mm.User InterfaceFront panel LCD for status & menu displays. 4-digit indicator for load (kN) & strain (mm) display selectively. LED Bar graph for pace rate quality monitoring. 8-button front panel keypad.Hardware FeaturesAccurate pace rate control through DSP-based feedback.Data integrity & validation facility for calibration data. Precision pressure & strain sensing using 16-bit ADCs. Rugged military-grade back panel connectors suited for demanding on-site conditions. EIA-485 to EIA-232 converter module.Data AcquisitionOnline run data acquisition & plotting. Advanced Graphical User Interface. Multiple logins & selective access control.CTM models comparison chart. Analysis and Report Generation

FIE Compression Testing Machine is designed for test materials under compression bending, transverse and shear loads. Hardness test on metals can also be conducted.Motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen. Operation of the machines is by hydraulic transmission of load from the test specimen to separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.

Features       The FIE Compression Testing Machine Incorporates design features to enable high accuracy testing with economy, speed & versatility.       Loading Accuracy as high as + 1%     Straining at variable speeds to suit a wide range of materials.     Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials     Motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen.     High reading accuracy due to large size and design of dial.     Wide range of standard and special accessories, including load stabilizer.     Large effective clearance between columns enables testing of standards specimens as well as structures.     Simple controls for easy of operation.     Robust staining frame of an extremely rigid construction.     Safe operation ensured be means of safety devices.     Application :       FIE Compression Testing Machine is designed for test materials under compression bending, transverse and shear loads. Hardness test on metals can also be conducted.         Principal of Operation :       Operation of the machines is by hydraulic transmission of load from the test specimen to separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.     Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The piston of the dynamometer is constantly rotated to eliminate friction. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen.     Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.         Machine consists of :         Straining Unit      This consists of a hydraulmic cylinder and a table coupled with the ram of hydraulic cylinder, mounted on robust base. The cylinder and the ram are individually lapped to eliminate friction. The cross-head is connected to two screwed columns and is driven by a motor, for rapid adjustment of test height.     An elongation scale with a minimum graduation of 1.0 mm, is provided to measure the deformation of the specimen.     Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.     Control Panel :      The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.     Power Pack :     The power pack generates the maximum pressure of 200 kgf/cm2 the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.     Hydraulic Controls :     Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of table movement.     Load Indicator System :     This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded.     Pendulum Dynamometer :      This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer  system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.     Autographic Continuous Roll Load-Elongation Recorder :     This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ration of either 1:5 or 1:10.A continuous roll of graph paper is stored inside the drum and is easily replaced.     Accuracy & Calibration :      AII FIE Compression Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828. An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.    

Compression Testing Machine (Electrically Operated) - Four Pillar type It is an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height. The machine meets the essential requirements of various Indian, British & American standards for compression tests. Loading Unit :The hydraulic jack of 2000 kN capacity is fixed to base. The upper plate has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower plate rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower plate. Pumping Unit :The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with gauges. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed on the pumping unit at an angle for easy readability. The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is also equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are also incorporated in the pumping unit so that in the case of break-down of power supply, the motor will stop and would not-re-start unless starting switch is operated.

We are listed among the foremost Compression Testing Machines Suppliers based in Maharashtra. We offer superior quality Compression Testing Machines that are equipped with wear resistant spares and latest technology which makes them the best available option in the market. Complies To Indian Standards Specification 516-1959 Test Cube Size 5cm x 5cm x 5cm7.06cm x 7.06cm x 7.06cm10cm x 10cm x 10cm15cm x 15cm Test Concrete Cylinders 10 x 20cm15 x 30 cm

We are regarded as the leading manufacturer, exporter and supplier of Concrete Compression Testing Machine in Kolhapur, India. The offered machine is available in both manual and electrical configuration. The machine has high stability and durability. They are designed keeping in mind quality standards and norms. The machines can be availed from in various dimensions as per the specification of the client. Specifications : RSI-095 Compression Testing Machine, hand operated, 2000 Kn (200 tonne), Channel Model: Fitted with double plunger pump and hydraulic Load gauge 0-2000 KN cap RSI-096 Compression Testing Machine, hand operated, 2000 KN (200 tonne), 2 or 4 Pillar model, with separate pumping unit connected by a copper/rubber hose pipe, double plunger with pressure gauge 0-2000 KN capacity. RSI-097 Compression Testing Machine, 250 KN (25 tonne) Electrically-cum-manually operated. Two Four/Pillar Model. " Compression Testing Machine, 500 KN (50 tonne) Electrically-cum-manually operated. RSI-099 Compression Testing Machine, 1000 KN (100 tonne) cap. Electrically-cum-manually operated. 2 or 4 Pillaar Model RSI-100 Compression Testing Machine, 1000 KN (100 Tonne)cap. Electrically-cum manually operated. 2 or 4 Pillar Model : with two pressure gauges i.e. 0-500 KN x 2.5 KN divn. and 0-1000 KN x 5 KN/ divn. RSI-101 Compression Testing Machine, 2000 KN (200 Tonne) cap. Electrically-cum-manually operated. 2 or 4 pillar model. RSI-102 Compression Testing Machine, 2000 KN. (200 tonne) cap., Electrically-cum-manually operated with two Load gauges 2 or 4 Pillar Model. 0-1000 KN x 5 KN/divn. and 0-200KN x 10 KN/divn. RSI-103 Compression Testing Machine, 2000 KN (200 tonne) cap., Electrically-cum-manually operate with 3gauges. 2 or 4 Pillar MODEL. 0-500 KN x 2.5 KN, 0-1000 KN x 5 KN/div. and 0-2000 KN x 10 KN/divn. RSI-104   Compression testing Machine. Digital 2000 KN x 1 KN least count.                       RSI series Compression Testing machine are the finest of there type obtainable. The rugged construction & extreme simplicity make it possible for even non-technical personnel to operate them with ease and complete dependability. RSI Compression Testing Machine conform to the requirements international Standards like BS ASTM & Indian Standard IS:516.   Some Salient Features : High Stability, Self Aligning Platen Suitable for Testing Cubes and Cylinders of various sizes, Brick can also be tested, Digital having function of peak hold facility, memory status, automatic cutoff of maximum Load, Alarm generated when the sample breaks down, Cubes of size 50 mm - 200 mm can be tested, Cylinders 100 mm x 200 mm ht.& 150 mm dia. x 300 mm ht. can be tested.      Note : You can get Digital Readouts in all Machines cap. 250 KN to 3000 KN.

            1. These machines are suitable for checking compressive strength of concrete blocks,bricks,rubber pads,buffer springs etc. and other metals. 2. Loads are applied through Hydraulic loading system. 3. Material under test is kept between hardened and ground compression platens. 4. Different types of Measuring and Display systems are available as under:   Large dial type Hydro - Mechanical measuring system. Digital Load and Displacement display system with Graphic interface Computerized measuring system with Windows based software Package with extensive database support and graphic interface

  Staining at variable speeds to suit wide range materials. Various models - Max. capacity from 50 to 500 Tone. including load stabilizer. Continuous roll autographic recorder to study behavior of materials. Loading accuracy well within +- 1%

INTRODUCTION BUKE Airblast Dedusting Machines are manufactured in two models AD-130 & AD-180. The machines are designed and manufactured giving careful consideration to the problem of dust in finishing of leather. These Machines can be fitted after Throughfeed Buffing Machines to make a countinuous production system and the speed of the Dedusting Machine can be adjusted in accordance with the speed of Buffing Machine. The high level of technology and sophistication in the machine will guarantee dust free leather required in modern leather finishing processes. SALIENT FEATHERS DEDUSTING HEADS The machine is designed to have two dedusting heads on the top and one dedusting head at the bottom. This arrangement of jets ensures proper cleaning of leather on both the sides. The dedusting heads are carefully designed and manufactured to ensure smooth airflow and easy maintainance and cleaning. COMPATABILITY WITH THROUGHFEED BUFFING MACHINE BUKE Airblast Dedusting Machine can be easily connected to BUKE Through-feed Buffing Machine to give excellent results in the continuous process.It is not necessary that these machines can be coupled only with BUKE machines, but can be joined with any Throughfeed Buffing Machine having conveyor for carrying out processed leather. FEEDING OF LEATHER The leather coming out from Through-feed Buffing Machine will fall on the conveyor of Airblast Dedusting Machine and will be fed to the machine automatically. BUKE Dedusting Machine can be operatedindependently also, which gives flexibility in production. The conveyor speed of dedusting machine can be adjusted from 5 to 25 mtr./min. in accordance with the speed of Buffing Machine. COMPACT RCOTS BLOWERS The machine is operated with special high speed compact roots blower which gives required quantity of air with pressure and minimum noise level. The blowers are having minimum spares to reduce maintenance cost.

We are amongst the prominent Concrete Compression Testing Machine Manufacturer and Supplier. Our Concrete Compression Testing Machine is manufactured using technologically advanced machinery. The Concrete Compression Testing Machine is widely acclaimed for its reliable performance and accurate measurement. We provide the Concrete Compression Testing Machine as per the needs of the customers. Attributes Optimum performanceReliableLong lasting serviceExcellent efficiency Used For Testing of concrete compression strength

Vibro Sifter Machines, Seed Cleaning Machines, Destoner Machine, Seed Grade

Compression Testing Machine, Computerized Brinell Hardness Teste

Compression Testing Machines, Hardness Testing Machine