The sensors at the overhead tank is preset with a level at which the pump is to operate and switch off on reaching upper level. The pump is switched on only if the water is available at the reservoir. The system ensures no over flow from the overhead tank and no motor burn out due to dry running .
The sensors at the overhead tank is preset with a level at which the pump is to operate and switch off on reaching upper level. The pump is switched on only if the water is available at the reservoir. The system ensures no over flow from the overhead tank and no motor burn out due to dry running .
Detects situation of under voltage and over voltage in the electrical system. The relays have ON delay and Trip Delay timer. Voltage and Trip Delays are adjustable from the front panel.
Detects situation of under voltage and over voltage in the electrical system. The relays have ON delay and Trip Delay timer. Voltage and Trip Delays are adjustable from the front panel.
Detects situation of under voltage and over voltage in the electrical system. The relays have ON delay and Trip Delay timer. Voltage and Trip Delays are adjustable from the front panel. Enclosure is DIN-Rail Mounting and Panel mounting. DG set Automation, PCC, Distribution Boards and where ever voltage monitoring is must.
Detects situation of under voltage and over voltage in the electrical system. The relays have ON delay and Trip Delay timer. Voltage and Trip Delays are adjustable from the front panel. Enclosure is DIN-Rail Mounting and Panel mounting. DG set Automation, PCC, Distribution Boards and where ever voltage monitoring is must.
Undervoltage and Overvoltage protection, Over Load and Short circuit protection, Industrial grade components. Input surge current limiting.Ultra compact power supply.
Undervoltage and Overvoltage protection, Over Load and Short circuit protection, Industrial grade components. Input surge current limiting.Ultra compact power supply.
ADVANTAGES :No need PCBs,Switches,Meters. • Reduces assembly & wiring time by 80%.
Hysteresis- range-0.5 to 5 V
Servo Controller -Digital is total metering and control solution for servo stabilizers for wide range of input voltage and wide range of load requirement. This reduces production overheads like wiring and testing and increases
production rate of the voltage stabilizers.Designed with latest micro-controller technology the servo controller integrates multi parameter meters and servo
Servo_Controller AC synchronous motor controller driver.
Wide Range of Aux Supply from 85-280 V AC (with built in SMPS).
Standard cut out(92 x 92) with low depth-65 mm.
• Digital Multi Parameter Meter with 3 digiti 7 segment Bright displays for -
a) Input Voltage
Servo Controller -Digital is total metering and control solution for servo stabilizers for wide range of input voltage and wide range of load requirement. This reduces production overheads like wiring and testing and increases
production rate of the voltage stabilizers.Designed with latest micro-controller technology the servo controller integrates multi parameter meters and servo
Servo_Controller AC synchronous motor controller driver.
Wide Range of Aux Supply from 85-280 V AC (with built in SMPS).
Standard cut out(92 x 92) with low depth-65 mm.
• Digital Multi Parameter Meter with 3 digiti 7 segment Bright displays for -
a) Input Voltage
Servo Controller -Digital is total metering and control solution for servo stabilizers for wide range of input voltage and wide range of load requirement. This reduces production overheads like wiring and testing and increases , production rate of the voltage stabilizers.Designed with latest micro-controller technology the servo controller integrates multi parameter meters and servo Servo_Controller AC synchronous motor controller driver.
Servo Controller -Digital is total metering and control solution for servo stabilizers for wide range of input voltage and wide range of load requirement. This reduces production overheads like wiring and testing and increases , production rate of the voltage stabilizers.Designed with latest micro-controller technology the servo controller integrates multi parameter meters and servo Servo_Controller AC synchronous motor controller driver.
BPS Servo Controller -Digital is total metering and control solution for servo stabilizers for wide range of input voltage and wide range of load requirement. This reduces production overheads like wiring and testing and increases. production rate of the voltage stabilizers.Designed with latest micro-controller technology the servo controller integrates multi parameter meters and servo.
BPS Servo Controller -Digital is total metering and control solution for servo stabilizers for wide range of input voltage and wide range of load requirement. This reduces production overheads like wiring and testing and increases. production rate of the voltage stabilizers.Designed with latest micro-controller technology the servo controller integrates multi parameter meters and servo.
AC supply is stepped downed using heavy duty copper double wound transformer and rectified with full wave bridge rectifier. Out put volts and current are selectable by respective selector switches. Amp and Volt meters are provided for instant monitoring. Input AC and out put DC fuses are provided.These chargers are most suitable for battery charging shops, maintenance shops, repair shops etc. where number and size of batteries may regularly vary.
AC supply is stepped downed using heavy duty copper double wound transformer and rectified with full wave bridge rectifier. Out put volts and current are selectable by respective selector switches. Amp and Volt meters are provided for instant monitoring. Input AC and out put DC fuses are provided.These chargers are most suitable for battery charging shops, maintenance shops, repair shops etc. where number and size of batteries may regularly vary.
Magnetic float switches level sensor sare used to detect the senor shave seale dreed switches in a stem with a permanent magnet installed in the float.As float rises or falls, switch is activateddeactivated. Power House float sensor uses unique magnetic push at the floating magnet to respond fast to any change of liquid level.
Magnetic float switches level sensor sare used to detect the senor shave seale dreed switches in a stem with a permanent magnet installed in the float.As float rises or falls, switch is activateddeactivated. Power House float sensor uses unique magnetic push at the floating magnet to respond fast to any change of liquid level.
Lighting transformers serves as isolation between primary and secondary, it also restricts any high voltage spikes and EMF coming with the raw mains incoming power. It also restricts short circuit current in the load and saves major accidents.Power House lighting transformers are made with CRGO laminations and Electrolytic copper super enameled winding wires.
Lighting transformers serves as isolation between primary and secondary, it also restricts any high voltage spikes and EMF coming with the raw mains incoming power. It also restricts short circuit current in the load and saves major accidents.Power House lighting transformers are made with CRGO laminations and Electrolytic copper super enameled winding wires.
Series PABC chargers are having I C Controlled voltage monitoring circuitry for constant check on battery voltage and automatic selection of mode of charging. Till battery is fully charged, it is under BOOST mode ensuring quick charging . When battery reaches pre-set voltage, it is shifted to TRICKLE mode. it has heavy duty-double wound transformer, Full wave bridge rectifier, over load control,
Series PABC chargers are having I C Controlled voltage monitoring circuitry for constant check on battery voltage and automatic selection of mode of charging. Till battery is fully charged, it is under BOOST mode ensuring quick charging . When battery reaches pre-set voltage, it is shifted to TRICKLE mode. it has heavy duty-double wound transformer, Full wave bridge rectifier, over load control,
POWER HOUSE FCBC are designed to supply continuous power to the DC load and simultaneously charge the batteries connected. Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulate DC. The charger has two independent systems. Normally the DC power is supplied to the load by the Float Charger. It also supplies trickle current to the battery to keep it healthy. If the charging current under Float Mode exceeds a set level, Boost charger is switched ON. It supplies Quick charging current to the battery. On battery reaching the set value, the Boost Charger is switched OFF.
POWER HOUSE FCBC are designed to supply continuous power to the DC load and simultaneously charge the batteries connected. Input supply form 415 V. AC 3 Phase or 220 V. AC 1 Ph. is converted to regulate DC. The charger has two independent systems. Normally the DC power is supplied to the load by the Float Charger. It also supplies trickle current to the battery to keep it healthy. If the charging current under Float Mode exceeds a set level, Boost charger is switched ON. It supplies Quick charging current to the battery. On battery reaching the set value, the Boost Charger is switched OFF.
Country of Origin : 30 V, 48 V, 110 V and 220 V. DC
The charger has two independent systems. Normally the DC power is supplied to the load by the Float Charger. It also supplies trickle current to the battery to keep it healthy. If the charging current under Float Mode exceeds a set level, Boost charger is switched ON. It supplies Quick charging current to the battery. On battery reaching the set value, the Boost Charger is switched OFF.Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control monitoring systems, tripping circuits and supplying DC power source.
The charger has two independent systems. Normally the DC power is supplied to the load by the Float Charger. It also supplies trickle current to the battery to keep it healthy. If the charging current under Float Mode exceeds a set level, Boost charger is switched ON. It supplies Quick charging current to the battery. On battery reaching the set value, the Boost Charger is switched OFF.Boost chargers are must in Power Substations, Generating Stations, Telephone Exchanges etc. for control monitoring systems, tripping circuits and supplying DC power source.
The relay detects any leakage current in the network and actuates alarm trip circuit, • Aux. Supply : 240 V (AC) 110 V (AC), • Trip current : 100mA - 2 000 mA, • Output : 2 Change-over (Potential free)
The relay detects any leakage current in the network and actuates alarm trip circuit, • Aux. Supply : 240 V (AC) 110 V (AC), • Trip current : 100mA - 2 000 mA, • Output : 2 Change-over (Potential free)
Volt selector switch facilitates selection of battery volt from 2 volt to 36 volt. The charger has autoManual selector switch. In auto mode, charger selects Boost Trickle mode as per condition of battery. Manual mode can charge battery by set Amps. This is useful features to boost charge deeply discharged battery. Timer is provided to set charging time in Manual Mode. MCB for input and Output are provided on front panel. The system has heavy duty double wound transformer, Full wave bridge rectifier, over load control, Protection against Battery reverse connection.Temperature protection for over heating of rectifier is provided. These chargers are housed in 19" Rack Mountable cabinets.
Volt selector switch facilitates selection of battery volt from 2 volt to 36 volt. The charger has autoManual selector switch. In auto mode, charger selects Boost Trickle mode as per condition of battery. Manual mode can charge battery by set Amps. This is useful features to boost charge deeply discharged battery. Timer is provided to set charging time in Manual Mode. MCB for input and Output are provided on front panel. The system has heavy duty double wound transformer, Full wave bridge rectifier, over load control, Protection against Battery reverse connection.Temperature protection for over heating of rectifier is provided. These chargers are housed in 19" Rack Mountable cabinets.
Series PDCD DC drives are designed using the latest CMOS technology which helps to reduce maintenance, increase product reliability and enables extremely rapid commissioning.Fused AC input connections, Power-ON indication.
Series PDCD DC drives are designed using the latest CMOS technology which helps to reduce maintenance, increase product reliability and enables extremely rapid commissioning.Fused AC input connections, Power-ON indication.
Control Transformers for contractor applications have to Energize the coil and Maintain a contact for definite period of time. The initial energizing of the coil takes 5 to 40 mil. seconds and requires 3 to 10 times the normal current. While calculating the VA rating of the Control transformer, this factor should be taken in to account.
Control Transformers for contractor applications have to Energize the coil and Maintain a contact for definite period of time. The initial energizing of the coil takes 5 to 40 mil. seconds and requires 3 to 10 times the normal current. While calculating the VA rating of the Control transformer, this factor should be taken in to account.
Digital Universal Automatic Battery Charger are designed to charge almost all type of batteries. Be it Lead Acid,Sealed .Maintenance Free, Nickad it can charge. It can charge from Single cell to 36 V battery bank.Charging rate can be set from 2 Amps to 25Amps. These chargers are suitable for defense stations, transport depot etc.
Digital Universal Automatic Battery Charger are designed to charge almost all type of batteries. Be it Lead Acid,Sealed .Maintenance Free, Nickad it can charge. It can charge from Single cell to 36 V battery bank.Charging rate can be set from 2 Amps to 25Amps. These chargers are suitable for defense stations, transport depot etc.
Charge controllers are designed for automation of Battery Charging in Panel Boards. Many electrical control systems requires battery back-ups.If it exceeds the set limit, CC circuits operates resulting in reduced voltage to keep current constant, If current drawn is within the set limit, CC is off and out put voltage will be as per voltage set. This ensures quick charging of battery and no chance of over charging it.
Charge controllers are designed for automation of Battery Charging in Panel Boards. Many electrical control systems requires battery back-ups.If it exceeds the set limit, CC circuits operates resulting in reduced voltage to keep current constant, If current drawn is within the set limit, CC is off and out put voltage will be as per voltage set. This ensures quick charging of battery and no chance of over charging it.
On mains failure and receiving generator power, it connects the load to DG supply. During DG operation, load drawn is monitored. If the load exceeds the allotted limit, it disrupts the supply and rechecks in intervals. On reducing the load and keeping it within the limit, load is connected to DG supply. For different applications, we have specific models. They are with load limiter, without load limiter, transfer of load from one phase to other phase and many additional functions.
On mains failure and receiving generator power, it connects the load to DG supply. During DG operation, load drawn is monitored. If the load exceeds the allotted limit, it disrupts the supply and rechecks in intervals. On reducing the load and keeping it within the limit, load is connected to DG supply. For different applications, we have specific models. They are with load limiter, without load limiter, transfer of load from one phase to other phase and many additional functions.
Till battery is fully charged, it is under BOOST mode ensuring quick charging . When battery reaches pre-set voltage, it is shifted to TRICKLE mode. it has heavy duty-double wound transformer, Full wave bridge rectifier, over load control, Protection against Battery reverse connection.
Till battery is fully charged, it is under BOOST mode ensuring quick charging . When battery reaches pre-set voltage, it is shifted to TRICKLE mode. it has heavy duty-double wound transformer, Full wave bridge rectifier, over load control, Protection against Battery reverse connection.
Undervoltage and Overvoltage protection, Input surge current limiting.Ultra compact power supply.Industrial grade components.Reliable and cost efficient.
Undervoltage and Overvoltage protection, Input surge current limiting.Ultra compact power supply.Industrial grade components.Reliable and cost efficient.
Secondary Business TypeManufacturer / Exporters / Wholesale Suppliers
Year of Establishment2008
No. of Employees6 - 20
Annual TurnoverBelow Rs. 0.5 Crore Approx.
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
Baid Power Services Pvt Ltd. Established in 2008 is Retailer of automation power solutions, Servo Controller, Magnetic float sensor, Float Cum Boost Charger, Voltage Monitor Relay, Vaf Meters, Heavy Duty Battery Charger, servo panel, Battery Charger Panel, Earth Fault Relay in Kolkata, West Bengal.
Reviews & Ratings
Write a Review
Post Free Ad
