Cutting Machine Parts Dealers in Kolkata

We are a proficient Manufacturer & Supplier of Gas Cutting Nozzles from West Bengal, India. We have all the in-house manufacturing facility for their standard as well as specific construction. Our Gas Cutting Nozzles are manufactured using advanced designing techniques thus; offer long and safe service life and increase productivity. Buyers can acquire them in small and bulk quantities, from us. For timely deliveries, rely on us.   Technical FeaturesThis in one of the “Products of The World of Tomorrow Brought to You Today”. World’s Safest Gas Cutting Nozzles with the Best Performance, Durability and Reliability made of Technically Supreme quality materials Available in Standard (STD) and with In-built Back-Fire Arrestor (BFA) for Ultimate Safety – no more Accident / Burn / Injury or Fear.   Faster and sharp cutting due to more concentrated and intense high speed flame through reduced Nozzle bore by using High-Strength, Flame-Heat-Wear resistant, Cr-Cu / Ni-Cr-Cu / Ni-Cr-Zr-Cu material in place of plain Brass Inner Part as in the market. Faster cutting means savings in Fuel, Oxygen and Time And minimum Cutting width means – saving of costly material and less cutting wastage. Less cutting waste also means saving in Oxygen consumption. Savings in Material and Oxygen for cutting only 20 Meters completely recovers the cost of this Cutting Nozzle, while Life of this Nozzle is 10 to 20 times or more than that of other Nozzles. Minimum pressure drop within the Nozzle increases cutting thickness due to high velocity Gas and Oxygen jets Long and safe Service Life due to use of Ni-Chrome-Alloys. Durable and Consistent performance due to advanced Design. Great ultimate Economy Increased Productivity. Available in sealed unit against tampering of Back-Fire-Arrestor system within the Nozzle. (Patented design).   Two piece nozzle for Natural Gas/ LPG / Propane, 2-Seat, 7 – Sizes of central holes, Cutting capacity – 3mm to 300 mm   For Research Reports on Field Application Availability in Sizes and Materials

Brand: Weldstrong The nozzle is the “Business End of Gs Cutting :Using low quality or damaged nozzles can be compared to cutting clot with blunt scissors. Magnificent, expensive cutting machines cannot perform if poor quality cutting nozzles are used. We strive continually to improve nozzle design to increase efficiency,to lengthen working life,to affect gas cost saving and increase  cutting speed.   Features:   Gas: LPG acetylene Material: copper Body: Forged Body.   SunshineAll sizes are available in sunshine nozzle.

We are backed by a modern transportation facility that ensures safe delivery of the orders at required destinations. We are supported by such storage facility that provides protection from diverse damaging factors such as dust, moisture, rain, sunlight, etc. Also, we maintain complete hygiene inside the unit. Features : Highly efficient Quality product Highly reliable

Solid Telurium Copper Swaged Cutting Nozzle for Head Mixing and Pre – Mixing System for Acetylene Mixing principal, Oxy/Acetylene gases Preheat cones are close together to promote better economy of gases Preheat holes are available 6,8&9 depends upon the thickness of metal to be cut Cutting capacity 1/8” to 12” thick 09 sizes of central hole available for cutting different thickness of metal 45 degree 02 seat cone Can be used for hand cutting or Machine cutting Two Piece Nozzle for Natural Gas / Propane Mixing principal, Oxy/Natural gas or Propane Preheat slots are designed for preheat cones are close together to promote faster cutting and also economy of gases 02 seat, 45 degree cone 09 sizes of central holes are available. Cutting capacity 1/8” to 12” thick Can be used for hand cutting and Machine cutting Pre-heat slots are available 12,15&20 slots according to thickness of metal to be cut Do not use Acetylene Two Piece Nozzle for Natural Gas / Propane 03-seat cone 30 degree Turbulence effect provided at Gas mixing chamber which help to achieve proper heat output Mixing principal at nozzle Preheat slots are designed for preheat cones are close together to promote faster cutting and also economy of gases. 09 sizes of central holes are available Cutting capacity 1/8” to 12” thick Can be used for Hand cutting and Machine cutting Pre-heat slots are available 12,15&20 slots according to thickness of metals to be cut Do not use Acetylene. Solid Telurium Copper Swaged Cutting Nozzle Mixing principal at Nozzle Preheat cones are close together to promote better economy of gases Preheat holes are available 6,8&9 depends upon the thickness of metal to be cut Cutting capacity 1/8” to 12” thick 09 sizes of central hole available for cutting different thickness of metal 30 degree 03 seat cone Can be used for hand cutting or Machine cutting

We are recognized as one of prominent Gas Cutting Nozzles Suppliers in the market, offering wide variety of gas cutting nozzles to suit various requirements. Brand : Gravity Model : GCN 02 Application : Nozzles provide the preheating flames to raise the steel to ignition temperatures and direct the jet of oxygen on to the heated area to perform the cutting process. Approved by : CEISO 9001 Salient Features : The high copper content gives the nozzles an inbuilt quality and longer life.The smooth finish of the gas ports assure stable gas flow resulting in better quality cutting.Individual flame testing of nozzles guarantees consistent high quality performance.High copper content conducts heat away from the nozzle face thus keeping nozzle relatively cool and slag adherence to the nozzle face is reduced. Other Brand : AshaHMP

3 Hole Blade offers high –performance industrial razor and slitting blade for high –performance cutting application. We standard Slitting Blade for the film, foil, paper and converting industry. Whether rounded, slitted or odd shaped, blades are made for stainless steel, HSS, solid tungsten carbide or ceramic, we provide the cutting solution you need.

  Atlas Copco has a comprehensive range of DTH drill bits made from quality alloy steel, and has been precision machined to produce a perfect body, heat treated to the required hardness, given surface compression for fatigue resistance, and fitted with precision buttons manufactured in-house.

We are offering drill bits

Bar Cutting Machine Spare Parts, Cranes Spare Part

Different type of drill bits we supply which included PDC bits, tri-cone bits, and we supply these from China and Italy.

Blades, Wire Netting, Electric Wires, Electric Cables, Cables Accessorie

Cutting Blades, Cutting Tools, Drill Machine, Power Tool

Carbide Cutting Tools, HSS Cutting Tool

Industrial Blades, Wire Netting Blades, Band Blade, Hacksaw Blad

Blades, Coke, Coal, Iron Ore, Stee

Drill Bits, Air Blowers Machine Tools, Drill Machines, Drilling Tool

Industrial Blades, Industrial Blade, Safety Razor Blade

Blades, Alloy Steel Blades, Metal Cutting Bandsaw Blade

Cutting Blades, Cutting Machine, Ginning Machines, Grinding Whee

Blades, Iron Ore Fines, Lumps, Refractorie