Elevator Parts Dealers in Kolkata (110 products available)

• Brand Name: Suan
• Condition: New
• Material of Bucket: Stainless Steel
• Voltage(V): 220 V
• Bucket Size: 7 Inch
• Width: 100 to 1000 mm

Our reliable and superfast shipping facilities will not let you wait much and will efficiently deliver the range to your doorstep. If buyers are interested in attaining Bucket Elevator at the lowest prices, our organization is the products' established supplier.

Since inception, our company has upheld its policy to make timely delivery. Thus, we guarantee to deliver products to buyers doorsteps on the dates promised. We are counted amidst the well-known names based in Kolkata(India) and cater to every nook and corner.

The buckets are of seamless type made of 3.15mm thick steel sheet. Bucket elevator if fabricated from Ms material of 5mm thick at boot section 3.15mm thick at trunk and top section, respectively. A one-piece cast iron pulley, which has been crowned for tracking & rubber lagged to prevent slippage, are located in the boot & head section of the elevator to drive the belt.

• Material: Neoprene Rubber, Nylon
• Application: Moving Goods
• Color: Multi C
• Feature: Excellent Quality, Heat Resistant, Long Life
• Loading Capacity: 10-15kg, 15-20kg, 25-30kg, 35-40kg, 45-50kg

We are listed at the apex in the list of the well-reputed Bucket Elevator Belt Exporters from India. The Bucket Elevator Conveyor Belt offered by us occupies little earth coverage, no pollution, great conveying capacity, suitable for conveying bulk material etc. The same have made the Belt Bucket Elevator ideal for conveying material vertically, widely used in building, mining, chemical, light industry, Power station and grain etc. Configuration Elevator-bucket belt is compossed of rubber belt and elevator-bucket.The core of belt has two kinds of strcuturds tabric core and steal cord,which can be used for vertical elevated conveying,The requirements need the belt with high strength and low elongation,thus the elevatoe-bucket belt uses steel cors or polyester(polyester fiber)canvas as strength ply of belt. Application :- Suitable for conveying material vertically, widely used in building. mining. chemical.lightindustry, Power station and grain etc, field. Featrue :- Little earth coverage, no pollution, great conveying capacity,suitable for conveying bulk material.

An economical substitute for conventional steel buckets on account of economical pricing, longer life, low power consumption and fast smooth and clean discharge with a very low percentage of broken grains/granules. Manufactured from virgin food grade, heat and corrosion resistant polymers in sizes ranging from 4” to 14”. Application Area & Sizes The buckets are designed for extra heavy duty performance even in heated environments Only 100% virgin food grade raw materials are used The buckets are Non Toxic and safe for handling food grains.    

• Capacity: 4-5 ton
• Material: Mild Steel, SS
• Automatic Grade: Semi-Automatic
• Color: Gray
• Condition: New
• Voltage: 415 V
• Structure Type: Belt Conveyor
• Brand: SEC
• Usage/Application: For lifting of Materials
• Operating Height: 30 feet, 12 ft to 50 ft.
• Installation Provided: Yes

• Material: Mild Steel
• Automatic Grade: Semi-Automatic
• Voltage: 220 - 440 V
• Power Source: Electric
• Corrosion Resistant: Yes

• Brand Name: MIEPL
• Type: V-Belt
• Port: KOLKATA

Elevator ropes demand close dimensional tolerance and stringent material quality level to meet the tough safety requirement. Designed & manufactured under stringent norms and by state-of-the-art technology, Usha Martin elevator ropes are aimed to provide jerk free movement of elevator along with close dimensional tolerances.

• Type: Bucket Conveyor
• Structure: Belt Conveyor
• Brand Name: JUPITER
• Material: Cotton
• Condition: New
• Port: Kolkata,India
• Lead Time: within 6 to 8 weeks

We are the main supplier of this product.

The close weave of textile belts resist the tendency of the bolt heads to pull through the fabric of the cotton conveyor belting, which helps it to carry heavy loads. Further they come woven in two or three ply construction using 100% virgin cotton yarns of six or ten counts quality. Our extensive industry experience has helped us develop them as BISCUIT WEBS or BISCUIT CONVEYOR belts. Standard Width: 6” (150mm) to 72” (1800mm) width.Standard thickness : 1.5 mm, 3mm, 4.5mm, 6mm and 8mm

The wide range of elevator components offered by shahi engineering works has the capacity of meeting all the requirements of our customers. Get in touch with us for availing different elevator components like- control panels, cabins, doors, mechanical components, electrical components, guiderails & shafts, etc.

• Brand Name: Monarch
• Power: 2.2kW to 160kW
• Mounting Type: Floor
• Usage/Application: Elevator Control
• Model Number: Nice3000
• Elevator Control type: Simplex,Duplex and 3-8 Group
• Supports up to: 40 floors
• Mode of door operation: 3
• Start torque: 0Hz/200 deg c/0 (Closed Loop)

• Material: Aluminum
• Shape: Square
• Thickness: 1.2 mm
• Usage/Application: Electronics
• Copper Thickness: 1.6 mm
• Current Type: AC
• Frequency: 50Hz
• Efficiency: 85%
• Output Voltage: 220V

Slip Assembly, Hinge Assembly, Latch Assembly, Cotter Pin, Door Lug Pin, Hinge Pin Retainer, Grease Fitting, Link Assembly, Slip Bolt, Lock Washer, Shoulder Screw, Rubber Bushing, Insert Asembly, Setting Assembly, Bottom Assembly, Grease Fitting

hese container lifting lugs are supplied in sets of 4 and are available in with a total lifting capacity of up to 56 tonnes. The CLT and CLB lugs serve as flexible lashing points for the transportation of containers. Two types are available dependant on if you want to fasten them to the top or the side of the container: The CLT type is vertically mounted in the hole at the top of the container and is locked into place by simply turning the lug 900. This configuration allows for transportation via the use of a lifting frame in conjunction with cables, chains or slings. The CLB model is mounted horizontally to the side of the container at either the top or the bottom fixing holes. This model has a spring loaded bolt to prevent accidental release.

• Application: Parking
• Type: Parking Lift
• Design: Four Post
• Driving: Hydraulic
• Capacity: 3000 kg
• Car Inside: 6000 mm
• Gar Inside: 2500 mm
• Hoistway: 4500 mm

Bucket Elevators are used in industry to elevate bulk material to desired levels. The typical Bucket Elevator consists of a series of Buckets mounted on a chain or belt operating over head and boot terminals. A steel casing usually encloses the bucket line. Discharge Types: Centrifugal Discharge Type Continuous Discharge Type Positive Discharge Type Buckets made of Carbon Steel, Stainless steel, Plastic Construction are available with various designs, capacities, reinforced wear lips etc. Economic and simple design, generally suitable for free flowing materials, fines to small lump size, Buckets fixed on elevator chain or belt at regular intervals, with special fasteners. Correct speed of Buckets over the head wheel ensure proper discharge of materials by centrifugal action from the bucket to the discharge chute. .

The goods lifts that we offer has the capacity that ranges from 100kg to 5000kg. They are also spacious and can be manufactured according to the specifications of our clients. Sureka make Goods lift is manufactured as per customer’s requirements confirming to IS 14665:2000. It can be erected outside or inside the building, in absence of RCC Shaft, fabricated steel structure is provided.

• Color: Silver
• Feature: Robust construction, High functionality, Sturdiness

Smartest way to get rescued. Incase of a Power Failure / Single- Phasing / Abnormal Voltages. Simple & Compact Design, suitable for Geared Machines and can be interfaced with any controller (VWF or Single Speed).

• Automatic Grade: Automatic
• Material of Bucket: Stainless Steel
• Width: 100 to 1000 mm
• Bucket Size: 7 Inch
• Belt: 4 ply rubber

A Bucket Elevator can elevate a variety of bulk materials from light to heavy and from fine to large lumps. A centrifugal discharge elevator may be vertical or inclined. Vertical elevators depend entirely on the action of centrifugal force to get the material into the discharge chute and must be run at speeds relatively high. Inclined elevators with buckets spaced apart or set close together may have the discharge chute set partly under the head pulley. Since they don’t depend entirely on the centrifugal force to put the material into the chute, the speed may be relatively lower. Nearly all centrifugal discharge elevators have spaced buckets with rounded bottoms. They pick up their load from a boot, a pit, or a pile of material at the foot pulley. The buckets can be also triangular in cross section and set close to on the belt with little or no clearance between them. This is a continuous Bucket Elevator. Its main use is to carry difficult materials at slow speed. Early Bucket Elevators used a flat chain with small, steel buckets attached every few inches. Current construction uses a rubber belt with plastic buckets. Pulleys several feet in diameter are used at the top and bottom. The top pulley is driven by an electric motor. Best Bucket Elevator Manufacturers Bucket Elevators have proven themselves for vertical transport of many and diverse bulk materials for decades. As a market leader, Devcon Group successfully established the belt bucket elevator technology in the market decades ago.

• Material: Mild Steel, Fiber, Polymer
• Maximum Elevator Speed: 30 Feet Per Second
• Usage/Application: Rice Mills
• Size: 5" to 13"inch
• Maximum Elevator Rise: 5-10 m

• wire rope: Soft and high strength
• Round thread: High strength

• Size Range: 3 mm to 20 mm

Elevator ropes demand close dimensional tolerance and stringent material quality level to meet the tough safety requirement. Usha Martin is present in elevator rope business for more than 50 years and is a company of choice for OEM’s who require reliable performance of wire rope combined with high order of safety. Designed & manufactured under stringent norms and by state-of-the-art technology, Usha Martin elevator ropes are aimed to provide jerk free movement of elevator along with close dimensional tolerances.

We are offering elevator auto door 700co to 900 co small vision,big vision and full glass.