Pioneer Scientific Instrument Corporation Cossipore, Kolkata, West Bengal

PISCO™ Brand Viscometers are manufactured from crystal clear borosilicate glass true bore capillaries. The design and dimensions are maintained complying strictly with IS/BS/ASTM Specifications.Each Viscometer is individually checked in our own calibration laboratory with required atmosphere and calibrated/certified instruments using certified CANNON oils/liquids.PISCO™ Brand calibrated Viscometer tubes are regularly used by most of Oil companies, Petrochemical Industries and other research laboratories.PISCO™ Viscometer Tubes available with CALIBRATION CERTIFICATE and CERTIFIED at 40ºC or 40ºC/100ºC or as per your required temperature.In the following models/types. U’ Tube, Direct Flow, Type BS/U. Our Cat. No. 835(a) Suspended Level, Type BS/IP/SL. Our Cat. No. 835(b) Suspended Level, Shortened Form, Type BS/IP/SL(S). Our Cat. No. 835(c) Suspended Level, Miniature, Type BS/IP/MSL. Our Cat. No. 835(d) Cannon-Fenske, Direct Flow for transparent liquid, Type BS/IP/CF. Our Cat. No. 835(e) ‘U’ Tube Reverse Flow for opaque liquid. Type BS/IP/RF. Our Cat. No. 835(f) Cannon-Fenske Reverse Flow for opaque and transparent liquids, ASTM D 446/2515. Our Cat. No. 838(a) Cannon-Ubbelohde ASTM D 446/2515. Our Cat. No. 838(b) Ubbelohde for transparent liquids ASTM D 446/2515. Our Cat. No. 838(c)

Material : Borosilicate Glass

Number Of Flower : U Tube, Direct Flow, Type BS/U,Suspended Level, Type BS/IP/SL,Suspended Level, Shortened Form, Type BS/IP/SL(S),Suspended Level, Miniature, Type BS/IP/MSL,Cannon-Fenske, Direct Flow For Transparent Liquid, Type BS/IP/CF,U Tube Reverse Flow For Opaque Liqu

Uses : Regularly Used By Oil Companies, Petrochemical Industries, And Research Laboratories

Certification : Individually Checked In Calibration Laboratory With Certified CANNON Oils/liquids

We are glad to introduce ourselves as one of the leading Vacuum Tube Manufacturers and offer Vacuum Pin Tube, since 1961 under PISCO™ brand. Designed as per the international standards, our Vacuum Pin Tubes are extensively used for collecting sample from molten steel/gold/silver etc. required for hydrogen analysis. The use of finest grade borosilicate glass endows unmatched resistance against harmful substances. This leading attribute of our Evacuated Pin Tube makes them a highly reliable product. Our Vacuum Glass Pin Tubes are sealed at both ends with a thin walled bulb (weak point) at one side. PISCO™ brand Evacuated Pin Tubes feature a thin (0.5 mm. approx.) wall bulb section (weak point) which breaks on contact with molten metal. The molten metal then enters the tube to form a solid, slag-free metal pin every time. The clients can obtain these Pin Tubes, at market leading prices from us. Operation : In operation, the Vacuum Pin Tube is held in a simple spring holder. The molten metal is removed from the furnace and the slag is pushed aside. The pin tube is immediately inserted into the molten metal at an angle of 45 degrees (approx.) until the thin walled bulb section is completely immersed and this breaks the weak point of the glass tube and fills the pin tube with molten metal. Standard, precision, and high vacuum pin tubes are available as per following sizes and diameters : I.D. 2 mm. x O.D. 4 mm. : 25 Nos. in a tray x 60 trays = 1500 Nos. / 1 Carton Box. I.D. 3 mm. x O.D. 5 mm. : 20 Nos. in a tray x 60 trays = 1200 Nos. / 1 Carton Box. I.D. 4 mm. x O.D. 6 mm. : 17 Nos. in a tray x 60 trays = 1020 Nos. / 1 Carton Box. I.D. 5 mm. x O.D. 7 mm. : 15 Nos. in a tray x 60 trays = 900 Nos. / 1 Carton Box. I.D. 6 mm. x O.D. 8 mm. : 14 Nos. in a tray x 60 trays = 840 Nos. / 1 Carton Box.

Packaging Type : Clear

Material : Borosilicate Glass

Application : Collecting Samples From Molten Steel/gold/silver For Hydrogen Analysis

Feature : Sealed At Both Ends With A Thin-walled Bulb, Breaks On Contact With Molten Metal

Pioneer Scientific Instrument Corporation PISCO™ brings to you a comprehensive range of Sintered Glass Tube Sealing with reduced both ends / Pipeline Filter. It is widely used in laboratories for inline filtration of liquids / gas lines to stain solid particles and impurities. Made from 3.3 borosilicate glass, mostly used   in 30, 40, 50, 65, 90 & 125 mm. diameter with porosity 1, 2, 3 & 4 grade claims its reliability and accuracy.

Material : Metal

The company has cemented its presence among the distinguished Manufacturers, Suppliers and Exporters of Sintered Glass Gooch Crucibles. Made from 3.3 borosilicate glass, our Glass Gooch Crucibles are widely used for obtaining precipitates into dry form (and analysis the substance in the laboratory) for analytical work in the laboratory. The Crucible mostly used in15, 20, 30 & 50 ml. capacity with porosity 1, 2, 3, 4 & 5 grade claims its reliability and accuracy.

Diameter : 20-40mm, 40-60mm, 60-80mm, 80-100mm

Application : Heating Chemical Compounds

Finishing : Polished

Feature : Durable, Fine Finishing, Non Breakable, Rust Proof

Height : 10inch, 6inch, 8inch

Storing Capacity : 100-150ml, 150-200ml, 250-300ml, 50-100ml

Pioneer Scientific Instrument Corporation PISCO™ brings to you a comprehensive range of Sintered Glass Buchner Funnels. The disc and body of our Buchner Funnel is fabricated from high quality glass making the funnel resistant to attack from water, acids, salt solutions, halogens and organic solvent. Our Fritted Buchner Funnel enables hassle free filtration, and there is no requirement for paper filters. The, Sintered Glass Buchner Funnels, offered by us are available in various disc diameters and porosities.Features : 100% chemically pure Extensively used for the filtration of both liquids and gases Customized designs and specifications are welcome Available in a most of sizes and dimensions Applications : Medium filtration & washing of gases Analytical work Collection of fine precipitates Gas dispersion

Material : High Quality Glass

Number Of Flower : Fritted Buchner Funnel

Feature : 100% Chemically Pure,Customized Designs Available,Various Disc Diameters And Porosities

Applications : Industrial

Pioneer Scientific Instrument Corporation is a renowned name involved in the field of export and fabrication of superlative quality Sintered Glass Filter Disc. Available in a most of sizes and dimensions, our Filter Discs have gathered wide appreciation owing to their precision performance. Different types of thickness and porosities of our Sintered Glass Filter Discs make them a highly reliable product in the Lab Ware Industry. We are well reckoned as one of the prominent manufacturer of Sintered Glass Filter Disc, since 1961 in Kolkata, West Bengal.Operating Pressure Limit :Fritted sintered glassware is designed primarily for vacuum filtration or for gas flow at relatively low pressure. If used for pressure work the maximum differential on the disc should not exceed 15 PSI. PISCO™ manufacture a very wide range of Sintered Glass Filtration Sets with different models/sizes & porosities.   We provide Sintered Filter Round Disc 6.7 mm. to 200 mm., also  Sintered Disc with centre hole, Sintered Rod, Square Bar, Triangular Bar, Plate with various dimensions and thickness.

Number Of Flower : Filter Disc

Material : Sintered Glass

Applications : Vacuum Filtration, Gas Flow

PISCO™ Screw Capped Glasswares are ideal for laboratory culture work. Free interchange between the atmosphere inside and outside the mouth of the glassware, completely satisfying the gas requirements for aerobic culture, is easily attained by slightly loosening the caps. Can withstand repeated autoclaving since the liner used in it is made of pure silicone rubber with PTFE facing. Available in 3 models with different sizes : Culture Tubes, R.B./ F.B., Cat. No. T-80 : 5 ml., 10 ml., 15 ml., 30 ml. and 60 ml. Conical Flask, Cat. No. T-40 and 575b : 10 ml., 25 ml., 50 ml., 100 ml., 150 ml. and 250 ml. Bottles, Cat. No. T-10 and 442c. : 10 ml., 25 ml., 30 ml., 50 ml., 60 ml., 100 ml., 125 ml. and 250 ml.

Number Of Flower : Laboratory Glassware

Material : Glass With Pure Silicone Rubber Liner And PTFE Facing

Packaging Type : Clear

Packaging Type : Bottle

Application : Ideal For Laboratory Culture Work, Aerobic Culture, And Autoclaving

We are offering membrane filtration assembly with joint. pioneer scientific instrument corporation piscotm : providing vacuum filtration of tissue culture media, components, biological fluids, hplc and other aqueous solutions. Filter units contain an integrally sealed fritted glass support bed (perfectly ground to match a funnel) for holding a 25 mm. 37 mm. 47 mm. Dia. Filter membrane (not suitable for ceramic membranes). The unit is designed to maximize flow and reduce foaming and protein denaturation. The filter funnel support bed and receiver flask are fitted with interchangeable ground joint and one aluminum clamp is provided to hold the filter funnel and support bed properly. sizes availablefunnel capacityto hold a membrane of35 50 ml25 37 mm300 ml47 mm

Number Of Flower : Vacuum Filtration Assembly

Material : Glass

Packaging Type : Clear

Compatibility : Not Suitable For Ceramic Membranes

Purity : Integrally Sealed Fritted Glass Support Bed,Maximize Flow And Reduce Foaming,Protein Denaturation Prevention

Packaging Type : One Aluminum Clamp Provided

PIONEER SCIENTIFIC INSTRUMENT CORPORATION PISCO™ offers easy to use Membrane Filtration Assembly with Joint. This apparatus is widely used for Vacuum filtration of Tissue Culture media, components, biological fluids, HPLC and other aqueous solutions. The apparatus comprises of filter an integrally sealed fritted glass support bed (perfectly ground to match a funnel) for holding a 25 mm. / 47 mm. / 90 mm. diameter membrane. The design of Membrane Filtration Assembly with Joints enables better control over flow and reduces foaming. The assembly is also fitted with an interchangeable ground joint, receiver flask and one aluminum clamp for proper support.

Number Of Flower : Filtration Assembly

Material : Glass, Aluminum

Application : Vacuum Filtration Of Tissue Culture Media, Components

We are offering membrane filter holder assembly with silicone rubber fittings. pioneer scientific instrument corporation piscotm : providing vacuum filtration of tissue culture media, components, biological fluids, hplc and other aqueous solutions. Filter units contain an integrally sealed fritted glass support bed (perfectly ground to match a funnel) for holding a 25 mm. 37 mm. 47 mm. Dia. Filter membrane (not suitable for ceramic membranes). The unit is designed to maximize flow and reduce foaming and protein denaturation. The filter funnel support bed and receiver flask are fitted with interchangeable ground joint and one aluminum clamp is provided to hold the filter funnel and support bed properly. sizes availablefunnel capacityto hold a membrane of35 50 ml25 37 mm300 ml47 mm

Material : Silicone Rubber Fittings, Fritted Glass Support Bed, Aluminum Clamp

Size : 25 Mm, 37 Mm, 47 Mm

Usage : Vacuum Filtration Of Tissue Culture Media, Components

PIONEER SCIENTIFIC INSTRUMENT CORPORATION PISCO™ offers Membrane Filter Holder Assembly with Silicone Rubber Fittings. Our Membrane Filter Holder Assembly is designed in such a manner that it is easy to use and safe to handle. The Membrane Filter Holder Assembly, offered by us, comes with Silicone Rubber Fittings that allows you to regulate flow and reduce foaming. The filter funnel support bed (25 mm. / 47 mm. / 90 mm. diameter membrane) and receiver flask and one Aluminum Clamp are provided to hold the filter funnel and support bed properly.

PIONEER SCIENTIFIC INSTRUMENT CORPORATION providing Vacuum filtration of Tissue Culture media, components, Biological Fluids, HPLC and other aqueous solutions. Filter units contain an integrally sealed fritted glass support bed (perfectly ground to match a funnel) for holding a 25 mm. 37 mm. 47 mm. dia. Filter membrane (not suitable for Ceramic Membranes). The unit is designed to maximize flow and reduce foaming and protein denaturation. The filter funnel support bed and receiver flask are fitted with interchangeable ground joint and one Aluminium Clamp is provided to hold the filter funnel and support bed properly. One dust cover made of polypropylene is also provided. The total unit is autoclavable Another model is available with silicone rubber stopper (which can withstand repeated autoclaving) fitting in place of ground joint fitting.

We are offering membrane filter holder assembly. pioneer scientific instrument corporation providing vacuum filtration of tissue culture media, components, biological fluids, hplc and other aqueous solutions. Filter units contain an integrally sealed fritted glass support bed (perfectly ground to match a funnel) for holding a 25 mm. 37 mm. 47 mm. Dia. Filter membrane (not suitable for ceramic membranes). The unit is designed to maximize flow and reduce foaming and protein denaturation. The filter funnel support bed and receiver flask are fitted with interchangeable ground joint and one aluminium clamp is provided to hold the filter funnel and support bed properly. the total unit is autoclavable