Vikas Instruments Bara Bazar, Kolkata, West Bengal

The MO220 is specifically designed for monitoring moisture in wood. Memory contains 8 wood groups with calibrations for approx. 170 species of wood. Measurements can be taken using the integral pin electrodes or the included heavy duty remote probe. Automatically temperature compensated (ATC) readings when used with the temperature probe. Built-in calibration check, replaceable measurement electrode pins, user settable Auto Power off (1 to 9 minutes) with disable, and Low battery indication. Complete with protective cap, temperature probe, heavy duty remote moisture probe, replacement pins, two AAA batteries, and soft case.     Features:   Monitor moisture in wood and other building materialsMeasure directly with the built-in moisture pins or use remote hand-press probe on hard surfacesMemory contains 8 wood groups with calibrations for approximately 170 species of woodDesigned in a rugged double molded housing construction and is pocket sized for one-handed operation

Brand Name : Extech

The HDV-WTX is a Wireless Video Transmitter. For use with any Extech HDV-Series Video Scope Camera Heads and HDV Series Videoscope inspection cameras. Comes with a year warranty.CE 1 Year Warranty     Features:   Compatible with HDV-4CAM-xx, HDV-5CAM-xx and HDV-25CAM-xx probes (camera heads)Wireless transmission to HDV600 VideoScopeBrightness and Power On/Off controls

Brand Name : Extech

The TG20 Wire Tracer Kit identifies wire pairs, check continuity and test telephone line polarity. Transmitter has output cables terminated in modular RJ11 phone connector. The non-contact amplifier probe audibly identifies the selected wire or cable so that you can easily trace from source to termination. Comes complete with Wire Tracer Probe and Transmitter with RJ11 phone connector, a pair of alligator clips and two 9V batteries.     Features:   Transmitter with output cables terminated in modular RJ11 phone connectorTransmitter injects traceable signal into cables, checks telephone lines, and performs continuity checksNon-Contact probe audibly identifies selected wire or cableEasily trace wires from source to terminationTest for properly operating phone linesAdjustable sensitivity control improves wire identification and eliminates false detectionContinuity test ? visible indicationComplete with Wire Tracer Probe and Transmitter with RJ11 phone connector and pair of alligator clips, and two 9V batteries

Model Number : TG20

Category : Cable Tracers

4 1/2 digit LED display. Resolution 0.1 micro-ohm on 2 milli-ohm range.Mains cum Battery operated. True 4-wire resistance measuring technique eliminates lead resistance errors inherent in 2 wire systems. Pulse mode operation     Features:   Usable for Resistive & inductive load.Rechargable battery operated with inbuilt battery charger.Built in special features required for low resistance measurements.Portable & Fuse protected.Resolution 0.1 micro-ohm on 2 milli-ohm range.Mains cum Battery operated.True 4-wire resistance measuring technique eliminates lead resistance errors inherent in 2 wire systems.Pulse mode operation

Brand Name : Motwane

Extech’s pocket-sized Heat Index Psychrometer Pen easily monitors Heat Index during hot humid days to prevent heat stroke during outdoor activities, sporting events or, indoor workplace. Its pen-sized design makes it convenient to fit into your pocket and carry it wherever you go. Complete with CR2032 battery.     Features:   Built-in multiparameter sensor measures Heat Index, Wet Bulb Globe Temperature (WBGT), Humidity, Ambient Temperature, Temperature, Dew Point and Wet BulbUser Programmable Heat Index/WBGT alarmMIn/Max/AverageData Hold, Auto Power Off with disableComplete with CR2032 battery

8mm camera diameter and 2.7" Color TFT LCD Monitor     Features:   8mm diameter camera head with 4 built-in bright LED lamps for dimly lit areasHandheld design for quick, easy, on-the-spot viewing in small openingsCompletely submersible in water down to 1 meter for 1 hourNon-detachable waterproof 39" (1m) flexible gooseneck cable retains configured shape2.7" (68mm) color TFT LCD monitor for detailed images2x digital zoom for close-up viewingLow battery indicatorComplete with camera probe and 39" (1m) flexible cable, 4 AA batteries, and hard case

Brand Name : Extech

Rugged waterproof (IP57) housing with Flat Surface Electrode for measuring pH in liquids, semi-solids, and solids. Does not break or get junctions clogged like the traditional glass bulb electrodes. Easy to replace sensor is perfect for field or lab use.     Features:   Rugged replaceable flat surface pH electrode for quick on-the-spot pH measurementsSimultaneous display of pH and Temperature2 or 3 point calibration automatically recognizes buffer solutions (order pH buffers separately)PTS (percent of slope) tells you when it's time to replace your electrode (below 70% or above 130%)Automatic Temperature CompensationData Hold, Min/Max, Auto Power Off, and low battery indicationWaterproof design (IP57) floats in water and protects the meter in wet environmentComplete with flat surface pH electrode, protective sensor cap, and two 3V CR-2032 button batteries

Model : PH90

The Extech PH220-C pH Meter is a Palm pH with Cabled Electrode. Microprocessor provides for Automatic Buffer recognition. Memory stores 25 readings. Large LCD displays pH or mV and temperature simultaneously. Includes cabled pH electrode, protective holster, pH buffers and 9V battery.     Features:   Large LCD displays pH or mV and Temperature simultaneouslyMicroprocessor provides for Automatic Buffer recognitionMemory stores 25 readingsAutomatic Temperature CompensationUnit is completely waterproof when electrode is connected to the meterLow Battery indicator and Auto Power offIncludes cabled pH electrode, protective holster, pH buffers and 9V battery

Model : PH220-C

We are the leading supplier of this products.

Feature : RCD Trip test, AC-Detection Shaker, Indicator Self-test, Overload-Alert warning

MI 3295 STEP CONTACT VOLTAGE MEASURING SYSTEMMI 3295 Step Contact Voltage Measuring System is a voltage measuring system for testing and verification of protective earthing of power stations, substations and other power systems.     Features:   Measurement of step voltage and contact voltage.Measurement of earthing resistance with resolution of 1 mΩ.Measurement of specific earth resistance.High accuracy of the measurements due to a high current of up to 50 A and effective suppression of noise.Excellent immunity even against changing earth currents.Autonomous Step Voltage meter: no need for long voltage leads.Low weight.High safety due to low output voltage (55 V).Downloads test results directly to the PC with the help of the profes-sional PC SW package HVLink which enables analysis and documenta-tion of test results.

412355A is a Current and Voltage Calibrator and Meter. Precision source for calibrating process devices and measuring DC process signals from 0 to 24mA or as mV in voltage ranges with a super large LCD that displays readings in mA, as a percent of the 0 to 24mA range or as mV in voltage ranges. Additional features include Touch Keypad and five stored calibration values for fast calibrations. Complete with 9V Battery, calibration cable with spade lug terminals, carrying case, neck strap, and AC Power Adapter.     Features:   Oyster case with flip-up display is ideal for handheld or benchtop applicationsLarge 3-1/2 digit LCD display and touch keypadDisplay readings in mA or as a % of the 0 to 24mA range or as mV in voltage rangesProvides adjustable 0 to 24mA and 0 to 20V calibration source

Brand Name : Extech

MI 2130 VOLTSCANNERHigh performance, digital, one phase voltage recorder.     Features:   Pre-set voltage limits for power quality assessment in accordance with EN 50160.Recording of power supply outages and transient over voltages.Quick voltage quality assessment for unskilled users.Optional: 110 V version.

The VFM200 measures VOC (Volatile Organic Compound) and Formaldehyde concentrations in real-time. Fast response time, compact, easy-to-carry, and excellent for checking the indoor air quality of homes, offices, factories, hotels, schools and other indoor environments. Potential sources for VOCs include paints, finishes, adhesives, cigarette smoke, pesticides, personal care products, car exhaust, new furnishings, wall coverings, household cleansers, and cooking fuels. Chemicals include: Acetone, Ethylene Glycol, Formaldehyde, Xylene, 1,3-butadiene, Tetrachloroethene, Hydrogen Sulfide, Ammonia, Toluene, Benzene, Methylene Chloride, Perchloroethylene, and MTBE.     Features:   Backlit LCD displays TVOC (Total Volatile Organic Compound) and HCHO (Formaldehyde) concentrations simultaneously in real-timeBuilt-in fast response, high accuracy fuel cell Formaldehyde sensorTwo selectable units of measure (ppm, mg/m3)Adjustable audible and visible high/low alarmsAuto Power OffComplete with rechargeable battery and Universal AC Adaptor/Charger (multi-plugs US, EU, UK, and AU)

Category : Air Quality Meter

The HDV600 has various optional camera probes to fit your application needs. Choose from a range of sizes with articulating and/or wireless features. Waterproof (IP67) Videoscope features a 5.7 in. color LCD TFT with high definition 640 x 480 resolution. The SD memory card included stores more than 14,600 images. Video recording (up to 4 hours) with voice annotation. AV output for viewing images and video directly on a monitor. Video and images can be transferred to a PC via the SD card or USB output. Optional wireless transmitter allows you to transmit video up to 100ft (30 m) from the measurement point to your monitor. Includes SD card, 3.7 Volt rechargeable Li-Polymer battery, patch cable, AC adaptor, USB and AV cables, and hard carrying case.

Brand Name : Extech

The VIR50 is a 3992�F (2200C) Digital Laser Video IR Thermometer which features a 2.2" color TFT LCD display and built-in VGA (640 x 480) Camera. Includes a MicroSD card for capturing images (JPEG) and video (3GP) for viewing on your PC. Dual lasers indicate the ideal measuring distance (approximately 50 inches) where the two laser points converge to a 1" target spot. Comes with microSD card, general-purpose Type K bead wire probe, USB cable, rechargeable 3.7V battery, carrying case, and user manual.     Features:   Non-contact IR Temperature measurement from -58 to 3992�F (-50 to 2200�C) with 50:1 distance to target ratioBuilt-in VGA (640 x 480) CameraMicroSD card for capturing images (JPEG) and video (3GP) for viewing on your PCDual laser indicates ideal measuring distance where the two laser points converge to a 1" target spotFast 150 millisecond response time, color LED bargraph for viewing trendsType K Thermocouple input, USB interfaceAir Temperature and Relative Humidity measurementAdjustable emissivity increases measurement accuracy for different surfacesAdjustable High/Low set points with audible alarm alerts user when temperature exceeds the programmed set pointsMAX/MIN/AVG/DIF functions, Auto Power OffComplete with microSD card, general purpose Type K bead wire probe, USB cable, rechargeable 3.7V battery, and carrying case

Video Borescope Inspection Camera with 17mm camera diameter and 2.4 inch color TFT LCD Monitor is ideal for Home Inspection (Inspect in walls for mold, insect infestation, electrical wire or water pipe location); HVAC ( Inspect inside ducts, behind motors and compressors); Automotive (View inside or around engines and transmissions); Industrial (Inspect weld integrity, process equipment, gears, molding machines); Aerospace (Aircraft inspections for contamination, debris, cracks or other damage), and Government (Safety and security inspections) Applications. Glare-free close-up field of view. Display detaches for easy storage. Complete with 4 x AA batteries, extension tools (mirror, hook, magnet), video output jack, and hard case.     Features:   17mm diameter camera head with 39" (1m) flexible gooseneck cable retains configured shapeMini water-proof (IP67) camera head for high resolution viewingTwo bright LED lamps with dimmer to illuminate viewed objectGlare-free close-up field of viewDisplay detaches for easy storageOptional BR200-EXT extension cable available for increasing viewing depth (maximum 2 extension cables can be connected to the borescope)Complete with 4 AA batteries, extension tools (mirror, hook, magnet), video output jack, and hard case

Brand Name : Extech

This Combination Vibration Meter and Laser Tachometer measures Acceleration, Velocity, Displacement plus Contact/Non-Contact RPM and Linear Surface Speed. Vibration Meter features remote sensor with magnetic adapter on 39-Inch cable, 10Hz to 1kHz frequency range, RMS or Peak value modes, and manual/auto store of up to 1000 readings. Tachometer features a laser for non-contact measurements of up to 4.9-feet, plus store/recall of last/min/max readings. Characters on the display reverse direction depending on contact, photo, or vibration mode. Meter comes complete with remote vibration sensor, magnetic mount, wheels for linear surface speed, reflective tape, 4 AA batteries, software with cable, and hard carrying case.     Features:   Remote vibration sensor with magnetic adapter on 39"(1m) cableWide frequency range of 10Hz to 1kHzRMS or Peak Value measurement modesManual/Auto store/recall up to 1000 readingsData Hold and Auto shut-offContact and Non-Contact (Laser) tachometer functionsUses a laser for greater distance non-contact measurements up to 4.9ft (1.5m)Large LCD with characters on display reverse direction depending on contact, photo, or vibration modeWindows� 95/98/NT/2000/XP compatible software (included) allows captured readings to be downloaded to your PC for further analysis

Country of Origin : India

Size : As Required

Number Of Flower : Die Sets

Terminal Shutter Interlock Mechanism Prevents Wrong Operations11 FunctionsHeavy Duty Rubber HolsterData Hold, Auto Power OffMeasurement of Duty, Ignition Frequency, Ms - Pulse Width, RPM & DWELL     Features:   Ignition Frequency 0.1 Hz ~ 20 KHzPulse Width 0.1 ~ 999.9 ms RPM 2STR : 300 ~ 19999 rpm DC V 20V / 200V AC V 20mA / 200mA Resistance 200 Ω Frequency 2 KHz / 20KHz DWELL 1 / 2 / 3 / 4 / 5 / 6 / 8

Brand Name : Meco

MI 2230 VAFMETERMI 2230 VAFMeter is handheld multifunction instrument which can accurately measure voltage, current, power, harmonic distortion and phase angles in single, two and three phase systems.     Features:   TRMS Two channel voltage measurements, up to 600 VacTRMS Two channel current measurements, up to 3000 AacU-U, I-I, U-I angle measurement, phase diagramSupport for three-phase (Aaron) systemsContinuity/resistance of conductors with 200mA test current with polarity change and with pass/fail functionalitySimultaneous measurement and display of voltage, current phase angles and frequency on two or three-phase systemsAccurate phase angle measurement at low current levelsEasy to use: large bright LCD display and large buttons enable easy handling of the instrumentMemory storage for storing up to 1500 measurementsSafe: built for CAT II / 600V environmentsPortable: rugged carrying case with a handle and lightweight design enable easy moving the instrument between sites.Built in charger & rechargeable batteries: instrument has a built-in charging circuit and comes with a set of rechargeable NiMH batteries.Downloadable: downloads test results via RS232 or USB cable directly to the PC with the help of the Metrel EuroLink software.

The SDL470 is a UVA/UVC Light Meter and Data logger. The SDL470 can measure both long wave and short wave UV irradiance under UVA and UVC light sources respectively. This meter features a cosine correction filter, data logging to Excel format, offset adjustment for relative measurements, type K/J thermocouple input for temperature measurements (probe sold separately), record/recall modes, min and max readings, data hold plus auto power off with disable function. This product comes with a built-in tilt stand, SD memory card, UVA light sensor with protective cover, UVC light sensor, hard case, universal AC adaptor, user's manual, and 6 x AA batteries.     Features:   UVA probe captures long-wave 365nm UV irradiance measurements under a UVA (black light) sourceUVC probe captures short-wave 254nm UV irradiance measurements under a UVC light sourceCosine correction filter and metal housingDatalogging feature records readings with date and time stamp on an SD card (included) in Excel� formatOffset adjustment used for zero function or to make relative measurementsAdjustable data sampling rate from 1 to 3600 secondsStores 99 readings manuallyType K/J Thermocouple input for temperature measurements (probes sold separately)Large backlit LCD displayRecord/Recall MIN, MAX readings, Data Hold plus Auto power off with disable functionComplete with built-in tilt stand, SD memory card, UVA light sensor with protective cover, UVC light sensor, hard case, Universal AC adaptor, and 6 x AA batteries

407760 Sound Level Datalogger can record up to 129,920 records and uses a USB interface for easy setup and data download. The datalogger meets ANSI and IEC 61672 Class 2 standards with a 1.4dB accuracy. Additional features include A and C weighting, Fast/Slow response time, and 2 start methods: programmed (from PC) or manual. Comes complete with software, tripod, USB extension cable, windscreen, and 3.6-Volt Lithium battery.     Features:   Designed to meet ANSI and IEC 61672 Class 2 standardsUSB interface for easy setup and data download30 to 130dB rangeDatalogging capability up to 129,920 recordsSelectable data sampling rate: 50ms, 500ms, 1s, 2s, 5s, 10s, 60sRecords readings with real time clockTwo start methods: programmed (from PC) or manual0.5" electret microphone

Check up to 30 amps without breaking the circuit with the AUT35. Mini and ATC blade connectors plug into the fuse block, and alligator clip connectors are also included. It has a measuring range of 30 amps/48 VDC (10 seconds, max) with 100 mA resolution and (2 percent + 2 digits) accuracy. Results are displayed on a 3.5-digit LCD with bargraph.     Features:   Mini and ATC blade connectors with 1.3ft (40cm) cable plug into the fuse blockAlligator Clip connectors with 2.5ft (75cm) cable includedMeasuring range: 30A/48VDC (10 seconds max)100mA resolution3.5 digit LCD with bargraphData Hold and Zero functionIncludes one 9V battery

Calibration of AC Volt, Amp, Frequency MetersCalibration of DC Volt, Amp MetersCalibration of Resistance Meters, Insulation Testers     Features:   Stability DC : < 0.01 %FS / 2 min, AC : < 0.03 %FS / 2 minRipple : < 0.1 %Power Supply : 230 VAC, 50 (60) HzPower Consumption : < 180 VARelative Humidity : ≤ 80 %Distortion : < 0.5 %Display : 51/2 Digit LED Digital DisplayStep adjustment of Output Signal : 10 %FS, 1 %FS, 0.1 %FS, 0.05 %FSDimensions : 147mm (H) x 480mm (W) x 480mm (D)Total Weight : 17 kgs (approx.)

Compact rugged meter for non-destructive thickness measurementsExtech offers Thickness Gauges designed in compact, handheld, rugged housing ideal for field use. The ultrasonic technology allows for non-destructive thickness measurements for primarily steel structures. Complete with 2oz bottle of coolant, 2 AA batteries, 5MHz Transducer and hard carrying case.     Features:   Wide measurement range:5MHz probe: 0.040" to 20" of steel10MHz probe: 0.020" to 20" of steel (optional)Sunlight readable dot-matrix display with backlightMultiple transducer options for high temperature and difficult to measure materialsFast minimum feature to capture minimum thicknessesComplete with 2oz bottle of couplant, 2 AA batteries, 5MHz Transducer, and hard carrying case